Estimating long-term time-resolved indoor PM2.5 of outdoor and indoor origin using easily obtainable inputs

To evaluate the separate impacts on human health and establish effective control strategies, it is crucial to estimate the contribution of outdoor infiltration and indoor emission to indoor PM_2.5 in buildings. This study used an algorithm to automatically estimate the long-term time-resolved indoor PM_2.5 of outdoor and indoor origin in real apartments with natural ventilation. The inputs for the algorithm were only the time-resolved indoor/outdoor PM_2.5 concentrations and occupants’ window actions, which were easily obtained from the low-cost sensors. This study first applied the algorithm in an apartment in Tianjin, China. The indoor/outdoor contribution to the gross indoor exposure and time-resolved infiltration factor were automatically estimated using the algorithm. The influence of outdoor PM_2.5 data source and algorithm parameters on the estimated results was analyzed. The algorithm was then applied in four other apartments located in Chongqing, Shenyang, Xi'an, and Urumqi to further demonstrate its feasibility. The results provided indirect evidence, such as the plausible explanations for seasonal and spatial variation, to partially support the success of the algorithm used in real apartments. Through the analysis, this study also identified several further development directions to facilitate the practical applications of the algorithm, such as robust long-term outdoor PM_2.5 monitoring using low-cost light-scattering sensors.     

最大塑性功原理在烧结体上限分析中的应用

最大塑性功原理又称第二塑性变分原理，在致密体塑性变形分析叶l是运用能量法进行变形力能计算的基础。本文从分析Drucker公设的亢要条件出发，证明了烧结体塑性变形最大塑性功原理的存在，片在该原理的荩础卜，推导出塑性变形的上限功率表达式，并以平面挤压条件下的上限法应用作为实例加以说明。     

双轴晶体主平面上倍频的相位匹配

从折射率椭球方程和折射率椭球面出发，讨论光束在双轴晶体中传播及偏振的特性、主平面倍频共线相位匹配（PM）问题，得到了双轴晶体主平面内激光所有可能PM倍频的8种偏振组合及其相应的PM角公式、有效非线性（NL）系数deff的一般表达式。结果表明：得到的公式简单，可大大简化PM参数计算及优化设计；折射率椭球面是单层曲面，比双层的折射率面简单；基于折射率椭球面寻找所有可能PM的类型、偏振组合的方法物理图像简明，易于理解，大大降低了双轴晶体PM问题分析的难度。     

Deorthogonalization of ODS-CDMA QPSK by AM/PM Nonlinearity

When using a conventional demodulator, a sufficient condition to maintain ODS-CDMA codeword orthogonality is constant relative channel amplitude over the codeword duration. When transmitted over a memoryless, AM/PM nonlinearity channel, the chip-to-chip fluctuating amplitude of a composite ODS-CDMA QPSK waveform produces a chip-to-chip fluctuating phase that deorthogonalizes the ODS-CDMA codewords, resulting in an additional multiple access self-interference similar to that found in asynchronous DS-CDMA. For ODS-CDMA QPSK in an AM/PM nonlinearity channel, we utilize the Central Limit Theorem, derive, and evaluate: (i) an expression for the signal-to-distortion ratio at the demodulator output, (ii) an expression for the uncoded bit error probability, and (iii) an upper bound on the convolutionally-coded bit error probability. We find that the degradation to BER depends on both the AM/PM nonlinearity slope and the ODS-CDMA channel loading.     

热等静压技术的发展及应用

在介绍热等静压技术和设备发展的基础上，对其在提高铸件质量以及拓展高速钢、双炼钢和超级双炼钢、高性能陶瓷等新型材料应用领域方面的作用，进行了较全面的阐述。并预计，因热等静压技术所具有的优势，在今后几年其应用增长可达到每年递增15％-20％的水平，且随着其在铝加工工艺中应用的拓展，年增长率可望达到25％。     

多信道E1映射复用成帧芯片PM8316及其应用

PM8316是PMC-Sierra公司生产的一种低功耗、高性能的多信道E1映射复用成帧芯片。该芯片内部集成了映射器、复用器、成帧器，其处理容量为63路E1，并含有8位微处理器总线接口和5个标准信号的JTAG测试端口，可支持收发抖动衰减。文中介绍了PM8316的主要功能和接口，给出了它在SDH终端设备中的主要信号电路框图。     

上海市吴淞工业区大气PM2.5水溶成分的元素分析及细胞毒性研究

通过ICP-MS测定了上海市吴淞地区大气PM2.5水溶成分金属元素含量,通过四唑盐(MTT)测定细胞存活率,通过超氧化歧化酶(SOD)和丙二醛(MDA)两个指标测定细胞氧化损伤,琼脂糖凝胶电泳测定细胞内DNA损伤,流式细胞仪(Flow cytometry)检测细胞凋亡和周期等实验研究了大气PM2.5水溶成分的细胞毒性.实验结果表明:PM2.5可溶成分中Zn元素含量最高,PM2.5在一定浓度范围内能导致细胞死亡,引起细胞的氧化损伤,影响DNA的复制,阻碍细胞增殖,但没有诱导细胞凋亡.PM2.5中可溶金属离子对细胞毒性表现为联合作用.     

H2O(g)对富氧燃烧超细颗粒物生成特性影响

为实现富氧燃烧技术的广泛推广,对煤粉燃烧在富氧气氛下的颗粒物排放特性进行了研究。在1800 K管式炉内进行煤焦燃烧试验,研究了富氧气氛下H₂O(g)体积分数(0、5%、10%、20%、30%)对煤焦燃烧超细颗粒物的影响;采用荷电低压撞击器(ELPI+)获得超细颗粒物质量和数量浓度粒径分布并进行分析。结果表明,H₂O(g)对超细颗粒物质量浓度和数量浓度粒径分布无影响,但会导致超细颗粒物的峰值波动。超细颗粒物总数量由最小粒径超细颗粒物决定,5种水蒸气浓度下EL?PI+第1级撞击器收集到的超细颗粒物数量占比均超过65%。超细颗粒物总质量由最大粒径超细颗粒物决定,5个水蒸气浓度下ELPI+第7级撞击器收集到的超细颗粒物质量占比均超过94%。低H₂O(g)浓度会抑制超细颗粒物生成,H₂O(g)体积分数为5%时的抑制作用最显著;高H₂O(g)浓度会促进超细颗粒物生成。这是因为一方面H₂O(g)与煤焦发生气化反应,使煤焦颗粒周围产生还原性气氛,促进矿物质还原为单质,进一步促进矿物质蒸发;另一方面气化反应是吸热反应,会降低煤焦颗粒燃烧温度,同时H₂O(g)加入也导致烟气热容增加进一步降低,煤焦燃烧温度抑制煤中矿物质的蒸发,导致超细颗粒物生成减少,是2种作用相互竞争的结果。此外,H₂O(g)的加入使超细颗粒物平均粒径增大,0~5%H₂O(g)时超细颗粒物平均粒径增大最迅速。     

Advancements in the design and validation of an air pollution integrated assessment model for Spain

This paper describes the design and application of the Atmospheric Evaluation and Research Integrated model for Spain (AERIS). Currently, AERIS can provide concentration profiles of NO₂, O₃, SO₂, NH₃, PM, as a response to emission variations of relevant sectors in Spain. Results are calculated using transfer matrices based on an air quality modelling system (AQMS) composed by the WRF (meteorology), SMOKE (emissions) and CMAQ (atmospheric-chemical processes) models. The AERIS outputs were statistically tested against the conventional AQMS and observations, revealing a good agreement in both cases. At the moment, integrated assessment in AERIS focuses only on the link between emissions and concentrations. The quantification of deposition, impacts (health, ecosystems) and costs will be introduced in the future. In conclusion, the main asset of AERIS is its accuracy in predicting air quality outcomes for different scenarios through a simple yet robust modelling framework, avoiding complex programming and long computing times.