Compiler compatible 5.66 Mb/mm2 8T 1R1W register file in 14 nm FinFET technology

1-read/1-write (1R1W) register file (RF) is a popular memory configuration in modern feature rich SoCs requiring significant amount of embedded memory. A memory compiler is constructed using the 8T RF bitcell spanning a range of instances from 32 b to 72 Kb. An 8T low-leakage bitcell of 0.106 μm² is used in a 14 nm FinFET technology with a 70 nm contacted gate pitch for high-density (HD) two-port (TP) RF memory compiler which achieves 5.66 Mb/mm² array density for a 72 Kb array which is the highest reported density in 14 nm FinFET technology. The density improvement is achieved by using techniques such as leaf-cell optimization (eliminating transistors), better architectural planning, top level connectivity through leaf-cell abutment and minimizing the number of unique leaf-cells. These techniques are fully compatible with memory compiler usage over the required span. Leakage power is minimized by using power-switches without degrading the density mentioned above. Self-induced supply voltage collapse technique is applied for write and a four stack static keeper is used for read Vmin improvement. Fabricated test chips using 14 nm process have demonstrated 2.33 GHz performance at 1.1 V/25 °C operation. Overall V_min of 550 mV is achieved with this design at 25 °C. The inbuilt power-switch improves leakage power by 12x in simulation. Approximately 8% die area of a leading 14 nm SoC in commercialization is occupied by these compiled RF instances.     

浅谈在多节目码流复用与解复用中PID码的作用

文章简要阐述了PID码在多节目码流的复用与解复用中所起的作用。并运用PID码的原理来解释和解决在实际工作中碰到的PID码问题。     

多孔硅发光机制的分析

从量子力学的基本理论出发讨论了量子限制效应，推导出多孔硅有效禁带宽度增量并用量子限制效应和表面态及其物质在发光中作用的理论解释了ＰＳ光致发光的实验现象。     

2—叠氮—1萘醌—5—磺酸生产工艺优化

研究以L-酸为原料,对合成用于制作PS版的2-叠氮1-萘醌-5-磺酸的亚硝化、还原及重氮化三步生产工艺进行最佳配比选优试验。结果表明对L-酸的总收率可达73-75％.获得了较高的收率。     

阴图PS版感光层的光交朕

阴图ＰＳ版感光层的光交朕曹曙光，王仁祥，曹维孝（北京大学化学与分子工程学院，北京１００８７１）关键词重氮树脂；成膜树脂；阴图ＰＳ版；光交联阴图ＰＳ版感光层主要是由成膜树脂和感光树脂组成。感光树脂一般是二苯胺或取代二苯胺重氮树脂．成膜树脂类型较多。就成...     

(CO2 + 2‐propanol) mixture as a foaming agent for polystyrene: A simple thermodynamic model for the high pressure VLE‐phase diagrams taking into account the foam vitrification

The equation of state model developed by Lacombe and Sanchez (J Phys Chem 1976, 80, 2352) is used in the form proposed later by Sanchez and Stone (Polymer Blends, Vol. 1: Formulation, 2000; Chapter 2) to correlate experimental vapor‐liquid equilibrium (VLE) data for the three binaries and the ternary systems. Experimental data from the binary systems carbon dioxide‐isopropyl alcohol (CO₂‐IPrOH), isopropyl alcohol‐polystyrene (IPrOH‐PS), and carbon dioxide‐polystyrene (CO₂‐PS) are used to calculate VLE properties for the ternary system CO₂‐IPrOH‐PS. Two‐dimensional VLE‐phase diagrams were calculated and used to describe from a thermodynamic point of view the pressure, volume, and temperature values that characterize a thermoplastic foam evolution process, from the extruder to the foaming die. For different initial mixture CO₂ + IPrOH concentrations, pressure reduction produces liquid foaming until the vitrification curve arrests the final foam volume expansion. The dependence of the vitreous transition with the system CO₂ + IPrOH concentration while foaming is represented by the Chow (Macromolecules 1980, 13, 362) equation. The calculation procedure is proposed as a design tool to reduce the amount of experimental data usually needed as a requirement previous to the design stage. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2663–2671, 2007     

交联型单分散聚苯乙烯微球的制备

以聚乙烯吡咯烷酮（PVP）为分散剂，偶氮二异丁腈（AIBN）为引发剂，乙醇为分散介质，二乙烯基苯（DVB）为交联剂进行了苯乙烯（St）的分散聚合；讨论了引发剂、交联剂、分散剂、单体用量对聚合物粒径及分布的影响，制备了交联型单分散聚苯乙烯微球。实验表明：当交联剂质量分数达到单体质量分数的1％时，微球依然可以保持良好的单分散性。在聚合体系中引入抗坏血酸，使其与微量的氧结合，有效地提高了微球的均匀度。     

疲劳与蠕变复合作用下PS的应变与寿命

对PS在疲劳/蠕变复合作用下应变与寿命进行了研究。结果表明：其疲劳/蠕变曲线与纯蠕变曲线十分相似。加载时间周期越短和疲劳载荷变化越频繁。结束普弹应变阶段应变越小，进入延迟弹性变形的平台应变阶段越早。在疲劳/蠕变复合作用下聚苯乙烯存在疲劳和蠕变的交互损伤，其断裂寿命比纯疲劳或纯蠕变的断裂寿命低。断裂寿命减小，疲劳/蠕变的交互损伤程度与温度密切相关，PS在较低温度的疲劳/蠕变交互损伤作用大于较高温度的交互损伤作用。随温度升高，疲劳/蠕变断裂寿命下降是疲劳和蠕变各自的单独损伤增加所致。     

高分子多孔膜的表面改性与抗污染研究

采用羟基化预处理、铈盐引发和碱化预处理、Fe2 /H2O2引发两种引发体系,对聚砜(PS)膜和聚丙烯腈(PAN)膜进行表面接枝丙烯酰胺的改性,研究预处理和表面接枝改性对膜污染的影响。采用红外光谱和X光电子能谱对羟基化和接枝改性的膜表面进行表征。研究表明,表面预处理和接枝后,PS膜和PAN膜的水通量均有所下降,但提高了抗牛血清蛋白膜污染能力。     

The morphology and mechanical properties of dynamic packing injection molded PP/PS blends

As a part of long-term project aimed at super polyolefin blends, in this work, we report the mechanical reinforcement and phase morphology of the immiscible blends of polypropylene (PP) and polystyrene (PS) achieved by dynamic packing injection molding (DPIM). The shear stress (achieved by DPIM) and interfacial interaction (obtained by using styrene-butadiene-styrene (SBS) as a compatibilizer) have a great effect on phase morphology thus mechanical properties. The shear-induced morphology with core in the center and oriented zone surrounding the core was observed in the cross-section areas of the samples. The phase inversion was also found to shift towards lower PS content under shear stress, at 70 wt% in the core and 30 wt% in the oriented zone, compared with 80 wt% for static samples (without shear). The tensile strength, tensile modules and impact strength were found largely increase by means of either shear stress or compatibilizer. The PS particle size is greatly reduced with adding of SBS, and the reduced particle size results in greater resistance to deformation, which causes the co-continuous structure at oriented zone change into droplet morphology. The morphology resulting from blending and processing was discussed based on effect of interfacial tension, shear rate, phase viscosity ratio and composition. The observed change of mechanical properties was explained based on the combined effect of phase morphology (droplet-matrix or co-continuous phase) and molecular orientation under shear stress.