Total Site Hydrogen Integration with fresh hydrogen of multiple quality and waste hydrogen recovery in refineries

This paper proposes a novel method combining Pinch Methodology and waste hydrogen recovery, aiming to minimise fresh hydrogen consumption and waste hydrogen discharge. The method of multiple-level resource Pinch Analysis is extended to the level of Total Site Hydrogen Integration by considering fresh hydrogen sources with various quality. Waste hydrogen after Total Site Integration is further regenerated. The technical feasibility and economy of the various purification approaches are considered, demonstrated with a case study of a refinery hydrogen network in a petrochemical industrial park. The results showed that fresh hydrogen usage and waste hydrogen discharge could be reduced by 21.3% and 67.6%. The hydrogen recovery ratio is 95.2%. It has significant economic benefits and a short payback period for Total Site Hydrogen Integration with waste hydrogen purification. The proposed method facilitates the reuse of waste hydrogen before the purification process that incurs an additional environmental footprint. In line with the Circular Economy principles, hydrogen resource is retained in the system as long as possible before discharge.     

Synergistic effect of co-alloying elements on site preferences and elastic properties of Ni3Al: A first-principles study

The site preferences of co-alloying elements (Mo–Ta, Mo–Re, Mo–Cr) in Ni₃Al are studied using first-principles calculations, and the effects of these alloying elements on the elastic properties of Ni₃Al are evaluated by elastic property calculations. The results show that the Mo–Ta, Mo–Re and Mo–Cr atom pairs all prefer Al–Al sites and the spatial neighbor relation of substitution sites almost has no influence on the site preference results. Furthermore, the Young's modulus of Ni₃Al increases much higher by substituting Al–Al sites with co-alloying atoms, among which Mo–Re has the best strengthening effect. The enhanced chemical bondings between alloying atoms and their neighbor host atoms are considered to be the main strengthening mechanism of the alloying elements in Ni₃Al.     

Ranking Pages by Topology and Popularity within Web Sites

We compare two link analysis ranking methods of web pages in a site. The first, called Site Rank, is an adaptation of PageRank to the granularity of a web site and the second, called Popularity Rank, is based on the frequencies of user clicks on the outlinks in a page that are captured by navigation sessions of users through the web site. We ran experiments on artificially created web sites of different sizes and on two real data sets, employing the relative entropy to compare the distributions of the two ranking methods. For the real data sets we also employ a nonparametric measure, called Spearman's footrule, which we use to compare the top-ten web pages ranked by the two methods. Our main result is that the distributions of the Popularity Rank and Site Rank are surprisingly close to each other, implying that the topology of a web site is very instrumental in guiding users through the site. Thus, in practice, the Site Rank provides a reasonable first order approximation of the aggregate behaviour of users within a web site given by the Popularity Rank.     

国内3G网络共享问题之研究

随着国内3G时代的来临，3G网络共享问题越来越受到人们的关注。本文结合国内移动通信的现状，着重分析了3G网络共享的模式及经济效益，论述了3G网络共享的相应策略。     

核磁共振谱的岩石孔喉结构分析

刘堂宴 ,王绍民 ,傅容珊 ,周明顺 ,李艳华 ,罗曼 .核磁共振谱的岩石孔喉结构分析 .石油地球物理勘探 ,2 0 0 3,38(3) :32 8～ 333岩心核磁共振 T2 谱和压汞分析数据均在一定程度上反映了岩石的孔喉结构 ,理论分析表明 ,这两组数据具有相关性。应用岩心核磁共振 T2 谱研究岩石孔喉结构 ,关键是确定 T2 与 Pc的转换系数。但以前的方法在 T2与 Pc 的转换过程中 ,需要涉及某些岩石特性参数 ,实用中有一定困难。本文直接利用岩心核磁共振 T2 谱和压汞分析数据之间的相关性 ,客观地确定 T2 与 Pc之间的转换系数 ,避免了确定岩石特性参数的困难。应用本文方法 ,对 6块岩心的多种核磁共振分析数据进行了对比分析 ,做出了 NMR (Nuclear Magnetic Resonance,简称NMR) T2 毛管力曲线和孔喉半径分布 ,并将这些结果与压汞分析的结果进行了对比。结果表明 ,岩心 NMR T2谱在实用性和评价精度上均略显优势 ;至少是在饱含油的条件下 ,岩心的 NMR T2 谱可以用于研究孔喉结构分布 ,油气的弛豫特性作为影响背景值存在 ,对于评价结果没有明显的影响 ;在全部 6块岩心中 ,T2 与 Pc 的转换系数位于 2 5 0 0～ 4 0 0 0μs· MPa之间。     

The spatial economics of geothermal district energy in a small, low-density town: a case study of Mammoth Lakes, California

This research focuses on the spatial economics of geothermal district energy (DE) systems that distribute hot fluids through a pipeline network to multiple thermal customers. We argue here that DE is held back by uncertainty about its economic feasibility when implemented in real places. DE works best with high urban densities, but in the US the best geothermal resources are in the less-populated west. Economic geography theory suggests that the optimal size of a DE firm's service area should depend on the trade-off between the economies of scale inherent in a large service area and the greater network development costs and heat loss involved in serving a large area. The HEATMAP© software program developed by Washington State University was used to study the feasibility of numerous scenarios for a proposed DE system in Mammoth Lakes, California. Results indicate that the core area of the town is large enough, dense enough, and in close enough proximity to the resource for profitable DE development. Proposed ski village developments would increase the thermal load density and significantly enhance its ability to remain competitive with other fuels, even in pessimistic sensitivity analyses regarding geothermal heat input costs, public participation, and retro-fitting costs.     

城市中心区游憩功能的开发——以武汉市为例

从我国游憩空间建设实践中 ,概括出对城市游憩功能认识过程的四个阶段 .进而 ,从城市中心商业区、历史街区和城市滨水区三个方面讨论了城市中心区的游憩功能开发问题 .最后 ,以武汉市为例进行了分析     

汾河二坝西干渠改建和接通至三坝总干渠工程可行性分析

本文阐述了汾河灌区二、三坝西干渠工程现状，分将了二坝西干渠改建和接通至三坝总干渠工程的必要性、技术可行性、经济可行性，建议该项目及早兴建。     

Geotechnical Investigation Strategies for Lunar Base

Geotechnical characterization of potential lunar sites will be a critical part of the planning and design process. The strategies used to conduct a geotechnical investigation will be dictated by the specific needs of the lunar base, the unique environment of the lunar surface, and general character of the lunar soils and rocks. This paper outlines some of the types of geotechnical information that will be important and identifies some of the more promising strategies which might be used to obtain such information in the lunar environment. Some of the most important geotechnical information for planning and site development will be related to construction in the lunar soil. In addition to construction concerns, geotechnical data for foundation design (or verification of predesigned foundations) will be needed. The geotechnical site‐characterization work should include geophysical techniques, supplemented by conventional mechanical boring and testing only to the degree necessary to correlate geophysical measurements with conventional soil properties and to investigate anomalies. Equipment used for geotechnical site characterization will also serve for mineralogical exploration. Several techniques for geotechnical investigation that may provide very useful information in an expedient manner are described. Geophysical methods include seismic and electromagnetic methods, including seismic surveys that utilize surface waves. Electromagnetic methods such as ground‐penetrating radar are fast, efficient methods for mapping the subsurface, although these techniques do not measure soil characteristics that can readily be correlated with engineering properties. Seismic methods provide information that may correlate with soil strength, compressibility, and excavatability. In‐situ physical testing will likely include penetration testing for direct physical measurement of lunar soil behavior.     

福禄宫“蝼蜂窠”制作技术初探

福禄宫位于湖南长沙市城西区,始建于清代光绪年间。解放后,福禄宫因未及时修理维护,朽损情况严重,1983年底被拆毁。通过对残留木制装修构件拼凑,推算出该建筑的蝼蜂窠部分测绘图。福禄宫蝼蜂窠类似于北方斗栱中的平身科,是一种装饰性构件。福禄宫的昂嘴采用翼龙飞凤交错排列的形式,部分昂嘴端部另加雕饰花板。蝼蜂窠采用层层叠置出踩的形式,其表面只施以桐油或光油等透明涂料,未施其它色漆及彩绘。