Total Site Hydrogen Integration with fresh hydrogen of multiple quality and waste hydrogen recovery in refineries

This paper proposes a novel method combining Pinch Methodology and waste hydrogen recovery, aiming to minimise fresh hydrogen consumption and waste hydrogen discharge. The method of multiple-level resource Pinch Analysis is extended to the level of Total Site Hydrogen Integration by considering fresh hydrogen sources with various quality. Waste hydrogen after Total Site Integration is further regenerated. The technical feasibility and economy of the various purification approaches are considered, demonstrated with a case study of a refinery hydrogen network in a petrochemical industrial park. The results showed that fresh hydrogen usage and waste hydrogen discharge could be reduced by 21.3% and 67.6%. The hydrogen recovery ratio is 95.2%. It has significant economic benefits and a short payback period for Total Site Hydrogen Integration with waste hydrogen purification. The proposed method facilitates the reuse of waste hydrogen before the purification process that incurs an additional environmental footprint. In line with the Circular Economy principles, hydrogen resource is retained in the system as long as possible before discharge.     

Synergistic effect of co-alloying elements on site preferences and elastic properties of Ni3Al: A first-principles study

The site preferences of co-alloying elements (Mo–Ta, Mo–Re, Mo–Cr) in Ni₃Al are studied using first-principles calculations, and the effects of these alloying elements on the elastic properties of Ni₃Al are evaluated by elastic property calculations. The results show that the Mo–Ta, Mo–Re and Mo–Cr atom pairs all prefer Al–Al sites and the spatial neighbor relation of substitution sites almost has no influence on the site preference results. Furthermore, the Young's modulus of Ni₃Al increases much higher by substituting Al–Al sites with co-alloying atoms, among which Mo–Re has the best strengthening effect. The enhanced chemical bondings between alloying atoms and their neighbor host atoms are considered to be the main strengthening mechanism of the alloying elements in Ni₃Al.     

行政行为的概念及构成要素

行政法学的研究应该尽量放宽视角,适应将来法治建设的需要。我们必须把行政行为的概念放到整个法治体系中甚至整个社会的发展中去研究。     

International legislation on trace elements as contaminants in food: a review

Environmental contaminants such as trace elements may be present in all foods. Foods, raw materials and ingredients for food production are to an increasing extent traded across borders. Hence, there is a need for international legislation on trace elements as contaminants in food. In 1961, the FAO and WHO established the Codex Alimentarius to elaborate international food legislation. Contaminants in food are handled by the Codex Committee for Food Additives and Contaminants (CCFAC). The Codex Alimentarius system for developing legislation concerning trace elements as contaminants in food is based upon the Codex General Standard for Contaminants and Toxins in Food (GSCTF). By October 2001, the principles for setting maximum limits (MLs) for contaminants in food are agreed, and work is in progress on MLs for trace elements such as lead and cadmium in the various food categories. The status for the proposals is presented and discussed. The EU Regulation 466/2001 of 8 March 2001 sets MLs for lead and cadmium in various foods. This regulation will apply from 5 April 2002. The EU regulation is more detailed but similar to the Codex draft standards for lead and cadmium in food. In future, legislators and administrators in the Codex and EU and analytical chemists will discuss how to use more and better analytical data as risk-management tools to protect public health. Trace elements' speciation is an important aspect of this discussion.     

Ranking Pages by Topology and Popularity within Web Sites

We compare two link analysis ranking methods of web pages in a site. The first, called Site Rank, is an adaptation of PageRank to the granularity of a web site and the second, called Popularity Rank, is based on the frequencies of user clicks on the outlinks in a page that are captured by navigation sessions of users through the web site. We ran experiments on artificially created web sites of different sizes and on two real data sets, employing the relative entropy to compare the distributions of the two ranking methods. For the real data sets we also employ a nonparametric measure, called Spearman's footrule, which we use to compare the top-ten web pages ranked by the two methods. Our main result is that the distributions of the Popularity Rank and Site Rank are surprisingly close to each other, implying that the topology of a web site is very instrumental in guiding users through the site. Thus, in practice, the Site Rank provides a reasonable first order approximation of the aggregate behaviour of users within a web site given by the Popularity Rank.     

国内3G网络共享问题之研究

随着国内3G时代的来临，3G网络共享问题越来越受到人们的关注。本文结合国内移动通信的现状，着重分析了3G网络共享的模式及经济效益，论述了3G网络共享的相应策略。     

Geotechnical Investigation Strategies for Lunar Base

Geotechnical characterization of potential lunar sites will be a critical part of the planning and design process. The strategies used to conduct a geotechnical investigation will be dictated by the specific needs of the lunar base, the unique environment of the lunar surface, and general character of the lunar soils and rocks. This paper outlines some of the types of geotechnical information that will be important and identifies some of the more promising strategies which might be used to obtain such information in the lunar environment. Some of the most important geotechnical information for planning and site development will be related to construction in the lunar soil. In addition to construction concerns, geotechnical data for foundation design (or verification of predesigned foundations) will be needed. The geotechnical site‐characterization work should include geophysical techniques, supplemented by conventional mechanical boring and testing only to the degree necessary to correlate geophysical measurements with conventional soil properties and to investigate anomalies. Equipment used for geotechnical site characterization will also serve for mineralogical exploration. Several techniques for geotechnical investigation that may provide very useful information in an expedient manner are described. Geophysical methods include seismic and electromagnetic methods, including seismic surveys that utilize surface waves. Electromagnetic methods such as ground‐penetrating radar are fast, efficient methods for mapping the subsurface, although these techniques do not measure soil characteristics that can readily be correlated with engineering properties. Seismic methods provide information that may correlate with soil strength, compressibility, and excavatability. In‐situ physical testing will likely include penetration testing for direct physical measurement of lunar soil behavior.     

基于JSP的移动开发技术论坛的设计与实现

本文讨论基于B/S模式的一种JSP论坛的设计与实现。完成的功能模块包括用户注册,浏览板块,发帖,回帖等,管理员编辑,删除等管理帖子功能,管理管理员用户功能等。     

低合金耐海水腐蚀钢在模拟腐蚀环境下的耐蚀性能研究

以普碳钢为对比样,采用模拟海水全浸和间浸、盐雾、湿热等加速腐蚀实验并结合电化学测试技术研究了Cu-Cr-Mo系低合金耐海水腐蚀钢Q345C-NHY3的耐蚀性能.结果表明：在各种模拟环境条件下与碳钢相比Q345C-NHY3钢都具有较好的耐蚀性能.     

城市道路景观设计研究

本文从城市道路景观的功能出发,分析了道路与景观的相互作用、道路景观的组成要素、道路景观设计的原则及道路景观设计的主要内容,从而引导道路设计者明确功能与景观并重、共性与个性共存、景观规划设计与道路规划设计同步进行的设计理念。