Kinetics of 4-nitrophenol biodegradation in a sequencing batch reactor

In this paper, the biodegradation process of 4-nitrophenol (4NP) in a sequencing batch reactor has been investigated. Kinetic tests have been carried out on biomass grown on mixed substrate (4NP plus biogenic substrate) both in the presence of a biogenic substrate fraction in the feed and with 4NP as the sole carbon source. Removal kinetics for all tests is well described by the typical substrate inhibition pattern as predicted by the Haldane equation. In both sets, estimated kinetic parameters are very similar: no beneficial effect of the biogenic fraction is observed on the 4NP removal while increasing trend of 4NP maximum removal rate with the 4NP/COD(TOT) ratio in the feed has been observed. This finding has been modelled by estimating the fraction of the total biomass involved in 4NP biodegradation as a function of 4NP concentration in the feed. High removal rates, short acclimation times and good settling characteristics of produced sludge (observed during the whole working period) confirm the suitability of periodic systems in enhancing the bacterial potentialities for biodegradation of xenobiotic compounds.     

Is biological treatment a viable alternative for micropollutant removal in drinking water treatment processes?

In western societies, clean and safe drinking water is often taken for granted, but there are threats to drinking water resources that should not be underestimated. Contamination of drinking water sources by anthropogenic chemicals is one threat that is particularly widespread in industrialized nations. Recently, a significant amount of attention has been given to the occurrence of micropollutants in the urban water cycle. Micropollutants are bioactive and/or persistent chemicals originating from diverse sources that are frequently detected in water resources in the pg/L to μg/L range. The aim of this review is to critically evaluate the viability of biological treatment processes as a means to remove micropollutants from drinking water resources. We first place the micropollutant problem in context by providing a comprehensive summary of the reported occurrence of micropollutants in raw water used directly for drinking water production and in finished drinking water. We then present a critical discussion on conventional and advanced drinking water treatment processes and their contribution to micropollutant removal. Finally, we propose biological treatment and bioaugmentation as a potential targeted, cost-effective, and sustainable alternative to existing processes while critically examining the technical limitations and scientific challenges that need to be addressed prior to implementation. This review will serve as a valuable source of data and literature for water utilities, water researchers, policy makers, and environmental consultants. Meanwhile this review will open the door to meaningful discussion on the feasibility and application of biological treatment and bioaugmentation in drinking water treatment processes to protect the public from exposure to micropollutants.     

14C-AMS在生物医学研究中的应用

加速器质谱（AMS）法是一种超灵敏的核分析技术,可用于体内^14C标记的痕量分子的示踪以及评估致癌性的生物标志物的检测。本文综述了^14C－AMS法在生物医学领域的广泛应用和最新进展。     

Anthropogenic organic contaminants in sediments of the Lippe river, Germany

Sediment samples of the Lippe river (Germany) taken between August 1999 and March 2001 were investigated by GC-MS-analyses. These analyses were performed as non-target-screening approaches in order to identify a wide range of anthropogenic organic contaminants. Unknown contaminants like 3,6-dichlorocarbazole and bis(4-octylphenyl)amine as well as anthropogenic molecular marker compounds were selected for quantification. The obtained qualitative and quantitative analytical results were interpreted in order to visualize the anthropogenic contamination of the Lippe river including spatial distribution, input effects and time dependent occurrence. Anthropogenic molecular markers derived from municipal sources like polycyclic musks, 4-oxoisophorone and methyltriclosan as well as from agricultural sources (hexachlorobenzene) were gathered. In addition molecular markers derived from effluents of three different industrial branches, e.g. halogenated organics, tetrachlorobenzyltoluenes and tetrabutyltin, were identified. While municipal and agricultural contaminations were ubiquitous and diffusive, industrial emission sources were spatially isolated. Specific seasonal trends of distribution patterns were not observed.     

Xenobiotic removal efficiencies in wastewater treatment plants: residence time distributions as a guiding principle for sampling strategies

The effect of mixing regimes and residence time distribution (RTD) on solute transport in wastewater treatment plants (WWTPs) is well understood in environmental engineering. Nevertheless, it is frequently neglected in sampling design and data analysis for the investigation of polar xenobiotic removal efficiencies in WWTPs. Most studies on the latter use 24-h composite samples in influent and effluent. The effluent sampling period is often shifted by the mean hydraulic retention time assuming that this allows a total coverage of the influent load. However, this assumption disregards mixing regime characteristics as well as flow and concentration variability in evaluating xenobiotic removal performances and may consequently lead to biased estimates or even negative elimination efficiencies.The present study aims at developing a modeling approach to estimate xenobiotic removal efficiencies from monitoring data taking the hydraulic RTD in WWTPs into consideration. For this purpose, completely mixed tanks-in-series were applied to address hydraulic mixing regimes in a Luxembourg WWTP. Hydraulic calibration for this WWTP was performed using wastewater conductivity as a tracer. The RTD mixing approach was coupled with first-order biodegradation kinetics for xenobiotics covering three classes of biodegradability during aerobic treatment.Model simulations showed that a daily influent load is distributed over more than one day in the effluent. A 24-h sampling period with an optimal time offset between influent and effluent covers less than the half of the influent load in a dry weather scenario. According to RTD calculations, an optimized sampling strategy covering four consecutive measuring days in the influent would be necessary to estimate the full-scale elimination efficiencies with sufficient accuracy. Daily variations of influent flow and concentrations can substantially affect the reliability of these sampling results. Commonly reported negative removal efficiencies for xenobiotics might therefore be a consequence of biased sampling schemes. In this regard, the present study aims at contributing to bridge the gap between environmental chemistry and engineering practices.     

The risks associated with wastewater reuse and xenobiotics in the agroecological environment

Treated wastewater reuse for irrigation, landscape and surface or groundwater replenishment purposes is being widely implemented. Although the reuse practice is accompanied by a number of benefits relating to the enhancement of water balances and soil nutrition by the nutrients existing in the treated effluents, a number of unanswered questions are still related to this practice. Besides the lack of knowledge in respect to possible elemental interactions that may influence the accumulation of heavy metals and other elements in the soil and the subsequent uptake by plants and crops, during the last several years, the technological progress in respect to analytical chromatographic methods has enabled the identification and quantitation of a number of organic xenobiotic compounds in treated wastewater. Therefore it is now known that the effluents' remaining organic matter most usually expressed as Chemical Oxygen Demand consists of a number of biorecalcitrant organic xenobiotic compounds including potential endocrine disrupting compounds (EDCs), pharmaceuticals, etc. It is also widely accepted that the currently applied treatment processes for urban wastewater abatement fail to completely remove such contaminants and this lead to their subsequent release in the terrestrial and aquatic environment through disposal and reuse applications. The number of studies focusing on the analysis and the toxicological assessment of such compounds in the environment is constantly increasing the aim being to bridge the various knowledge gaps associated with these issues. The existing knowledge in respect to the relevant existing legislation framework, the types of elements and chemicals of concern, the uptake of xenobiotic pollutants and also that of other neglected chemical elements along with their potential environmental interactions constitute the focus of the present review paper.The review addresses the problems that might be related to the repeated treated wastewater release in the environment for reuse applications in respect to the wastewater residual load in heavy metals, accumulating in soil and plants and especially in their edible parts, in xenobiotic compounds, including EDCs, pharmaceuticals and personal care products, drugs' metabolites, illicit drugs, transformation products, and also genes resistant to antibiotics.     

Biological treatment of propanil and 3,4-dichloroaniline: Kinetic and microbiological characterisation

Propanil (3,4-dichloropropionanilide) is a widely used herbicide, applied worldwide in rice paddies. Propanil is primarily transformed in nature to 3,4-dichloroaniline (DCA), which is more slowly biodegradable. Both compounds have adverse health and ecotoxicity effects. This work investigated the microbial ecology and kinetics of propanil-degrading enrichments obtained from soil in a sequencing batch reactor (SBR) operated with different feeding strategies, aiming at the enhanced biological removal of propanil and DCA from contaminated waters.During SBR operation with a dump feeding strategy, a high propanil concentration led to DCA accumulation, which was only fully degraded after 5 days, likely due to DCA inhibition. For this reason, the operational mode was changed to fed-batch operation with lower initial propanil concentrations, which resulted in faster propanil and DCA biodegradation. Thus a fed-batch operation seems more appropriate for the acclimatisation of an effective propanil- and DCA-degrading population.The changes in performance were accompanied by a shift in the microbial population structure, as determined by DGGE of the 16S rRNA gene, particularly after a feed of DCA as the sole carbon source. Isolates obtained from the acclimatised population included members of the genera Enterococcus and Rhodococcus, as well as Brevundimonas, which displayed >90% propanil biodegradation efficiency.     

The influences of the structure and activity of biologically active compounds on the assessment of inventive step

The assessment of inventive step for (biologically) active organic chemical compounds is discussed in the light of the application of well-established structure–activity-relationship theory as an important part of the common general knowledge. Applying the problem–solution approach (PSA), several relevant decisions of the Technical Boards of Appeal of the European Patent Office are discussed and the relevance of the PSA in this particular technical field is documented.     

Laboratory tests on the impact of superabsorbent polymers on transformation and sorption of xenobiotics in soil taking 14C-imazalil as an example

Due to water scarcity, the agricultural production in arid areas is dependent on a sustainable irrigation management. In order to optimize irrigation systems, the application of superabsorbent polymers (SAP) as soil amendments, frequently studied within the last years, may be an appropriate measure to enhance the water holding capacity and the plant-available water in poor arable soils. These persistent polymers are also able to reduce heavy metal and salt stress to crops by accumulating those inorganic compounds. However, the impact of SAP on fate and behavior of organic xenobiotics in soil is unknown. Therefore, transformation and sorption of the model substance ¹⁴C-imazalil were monitored without and with SAP amendment in silty sand and sand soil under laboratory conditions.Within the 100-d incubation period, the transformation of ¹⁴C-imazalil was not substantially affected by the SAP amendment even though the microbial activity increased considerably. In the silty sand soil, extractable residues dropped from 90% to 45% without and from 96% to 46% with SAP amendment. Non-extractable residues continuously increased up to 49% and 35% while mineralization reached 6% and 5%, respectively. In the sand soil, characterized by its lower microbial activity and lower organic carbon content, extractable residues merely dropped from 99% to 81% and from 100% to 85% while non-extractable residues increased from 2% to 14% and 1% to 10%, respectively. Mineralization was lower than 2%. The increased microbial activity, usually promoting transformation processes of xenobiotics, was compensated by the enhanced sorption in the amended soils revealed by the increase of soil/water distribution coefficients (K_d) of 26 to 42 L kg^− 1 for the silty sand and 6 to 25 L kg^− 1 for the sand, respectively.