Numerical approach to analyze fluid flow in a type C tank for liquefied hydrogen carrier (part 1: Sloshing flow)

The demand for clean energy use has been increasing worldwide, and hydrogen has attracted attention as an alternative energy source. The efficient transport of hydrogen must be established such that hydrogen may be used as an energy source. In this study, we considered the influences of various parameters in the transportation of liquefied hydrogen using type C tanks in shipping vessels. The sloshing and thermal flows were considered in the transportation of liquefied hydrogen, which exists as a cryogenic liquid at ?253 °C. In this study, the sloshing flow was analyzed using a numerical approach. A multiphase sloshing simulation was performed using the volume of fluid method for the observation and analysis of the internal flow. First, a sloshing experiment according to the gas-liquid density ratio performed by other researchers was utilized to verify the simulation technique and investigate the characteristics of liquefied hydrogen. Based on the results of this experiment, a sloshing simulation was then performed for a type C cargo tank for liquefied hydrogen carriers under three different filling level conditions. The sloshing impact pressure inside of the tank was measured via simulation and subjected to statistical analysis. In addition, the influence of sloshing flow on the appendages installed inside of the type C tank (stiffened ring and swash bulkhead) was quantitatively evaluated. In particular, the influence of the sloshing flow inside of the type C tank on the appendages can be utilized as an important indicator at the design stage. Furthermore, if such sloshing impact forces are repeatedly experienced over an extended period of time under cryogenic conditions, the behavior of the tank and appendages must be analyzed in terms of fatigue and brittle failure to ensure the safety of the transportation operation.     

Insights into biological delignification of rice straw by Trametes hirsuta and Myrothecium roridum and comparison of saccharification yields with dilute acid pretreatment

Rice straw is the most abundant agricultural residue on a global scale and is widely available as feedstock for cellulosic fuel production. However, it is highly recalcitrant to biochemical deconstruction and also generates inhibitors that affect enzymatic saccharification. Rice straw from eastern Arkansas was subjected to dilute acid pretreatment (160 °C, 48 min and 1.0% sulfuric acid) and solid-state fermentation with two lignocellulolytic fungi, Trametes hirsuta and Myrothecium roridum, and their saccharification efficacies were compared. T. hirsuta and M. roridum were tested separately; pretreatment of rice straw with either strain for seven days resulted in 19 and 70% enrichment of its holocellulose content, respectively. However, liquid chromatography analysis of the alkali extracts showed significant differences in cell wall degradation by T. hirsuta and M. roridum. T. hirsuta removed 15% more phenolic compounds and 38% more glucan than M. roridum, while M. roridum removed 77% more xylan than T. hirsuta. Fungal and dilute acid pretreated biomass was then hydrolyzed using Accellerase^® 1500, a saccharification cocktail. Saccharification efficiency of M. roridum was 37% higher than that of dilute acid pretreatment of rice straw, requiring 8% lower enzyme loading and 50% shorter enzymatic hydrolysis duration. Alkali extraction of fungal pretreated biomass also yielded 10–15 g kg⁻¹ of acid precipitable polymeric lignin (APPL), which is a valuable co-product for biorefineries. In comparison to dilute acid pretreatment, fungal pretreatment could be a cost-effective alternative for the degradation of recalcitrant biomass, such as rice straw.     

Effects of hydrolysis of precursor on the structures and properties of polymer-derived SiBN ceramic fibers

In this paper, polyborosilazane precursor was synthesied from HMDZ, HSiCl₃, BCl₃ and CH₃NH₂ using a multistep method. By controlling the storage conditions, parts of the polyborosilazane fibers were hydrolyzed. FT-IR, NMR, XRD, TEM and monofilament tensile strength test were employed to study the effects of hydrolysis of precursor on the structures and properties of polymer-derived SiBN ceramic fibers. FT-IR and NMR results indicate that Si-N group in PBSZ reacts with H₂O to form Si-O-Si group. After pyrolysis reaction at 1400℃, Si-O-Si group will finally transformed into highly ordered cristobalite and β-quartz, resulting in formation of the wrinkled surface of the obtained SiBN ceramic fiber. The strip-like defects on fiber surface, according to monofilament tensile strength test, had a significant effect on mechanical property of the obtained SiBN ceramic fiber and caused no increase in fiber tensile strength of hydrolytic polyborosilazane fiber before and after pyrolytic process.     

Tungsten(VI) oxide supported rhodium nanoparticles: Highly active catalysts in hydrogen generation from ammonia borane

Herein, we report the use of tungsten(VI) oxide (WO₃) as support for Rh⁰ nanoparticles. The resulting Rh⁰/WO₃ nanoparticles are highly active and stable catalysts in H₂ generation from the hydrolysis of ammonia borane (AB). We present the results of our investigation on the particle size distribution, catalytic activity and stability of Rh⁰/WO₃ catalysts with 0.5%, 1.0%, 2.0% wt. Rh loadings in the hydrolysis reaction. The results reveal that Rh⁰/WO₃ (0.5% wt. Rh) is very promising catalyst providing a turnover frequency of 749 min^?1 in releasing 3.0 equivalent H₂ per mole of AB from the hydrolysis at 25.0 °C. The high catalytic activity of Rh⁰/WO₃ catalyst is attributed to the reducible nature of support. The report covers the results of kinetics study as well as comparative investigation of activity, recyclability, and reusability of colloidal(0) nanoparticles and Rh⁰/WO₃ (0.5 % wt. Rh) catalyst in the hydrolysis reaction.     

光纤光栅感温火灾探测报警系统在原油罐区的应用

通过对现有罐区火灾自动报警技术的认真考察、对比,在石西集中处理站原油罐区安装了光纤光栅感温火灾探测报警系统.该报警系统的传感信号是光的波长变化,传感器及其探测系统是靠光缆连接而进入被测现场,它具有高安全性、高可靠性、高绝缘性、高抗电磁干扰性、防潮耐蚀、寿命长等其他传统火灾探测报警系统无法比拟的优越性能.阐述了其系统构成和运行效果.该系统在石西集中处理站运用效果良好.     

油田污水处理及酸化缓蚀剂的应用

介绍了油田污水处理及酸化中的几类缓蚀剂,重点介绍了咪唑啉型缓蚀剂、膦系缓蚀剂、曼尼希碱、炔醇等四类目前使用较多的缓蚀剂。结合缓蚀剂的分子结构阐述了其作用机理,论述了污水用缓蚀剂和酸化用缓蚀剂分子结构的区别及原因,并探讨了今后研究和发展的方向。     

诱导水解法制备微细高分散金红石型二氧化钛

采用加热TiCl4稀溶液的方式,制备晶种,将其导入一定浓度的TiCl4溶液中进行诱导水解。所得的偏钛酸经干燥、煅烧后得到分散性好,D50为1 mm以下,金红石含量为≥95%的高纯TiO2,可用于生产PTC热敏电阻等铁电陶瓷。