浇筑式沥青混凝土心墙型式改进的建议

本文根据浇筑式沥青混凝土主、副心墙材料的性能，分折了沥青混凝土心墙施工或运行中破坏的原因，建议用编织一无纺复合布取代预制块，以避免主、副心墙材料变形性能相差悬残对心墙运行的不利影响，从而发挥浇筑式沥青混凝土心墙的优越性。     

基于ANSYS有限元分析深水墩施工技术研究

介绍了丹江口二桥深水墩基础施工平台的设计，重点介绍利用ANSYS通用有限元程序对施工平台的施工过模拟分析，以及对分析结果的总结。     

曹娥江大闸闸墩混凝土高温季节温控措施

曹娥江大闸是国内最大的河口大闸,其中闸墩施工在夏季高温季节进行.较全面地阐述了混凝土原材料取料温度值的选取及控制措施,已浇筑混凝土内外温差及降温速率的控制措施等.根据闸墩的结构及边界条件,为了控制温度应力防止裂缝的产生,在施工过程中采取了骨料预冷、冷水拌和、掺冰屑拌和、仓面遮阳、内部通冷却水及外侧保温等综合温控措施,确保了闸墩混凝土的施工质量.     

SP预应力空心板在居住建筑中的应用和发展

分析现浇板和传统预制板的特点和弱点，提出发展SP板和SP叠合板是住宅实现大开间、灵活隔断的有效途径之一，也是建筑施工实现现代化的重要内容之一。     

水下封底混凝土与钢护筒粘结力试验

针对吊箱围堰施工中，混凝土与钢板间的粘结力无详实数据的现象，介绍了确定数据的实验模型、实验步骤，并分析了实验结果，以方便施工，指导施工。     

紧贴保护体钢筋砼老闸墩控爆拆除

介绍了特大体积闸墩爆破拆除时爆破参数的选取和实施方法。新老闸墩一端仅隔4cm，利用钻孔爆破法拆除老闸墩取得了快速，经济，安全的爆破效果。     

State of Practice for Positive Moment Connections in Prestressed Concrete Girders Made Continuous

Precast bridges are often constructed as single span for dead load, but continuous for live load. A diaphragm connection is provided for negative moment continuity. However, the connection may also be subjected to positive moments due to time-dependent effects. Because these moments may be large enough to damage the diaphragm or even the girders, a positive moment connection is often provided. This paper reports on a study to determine the types of positive moment connections used across the country and to identify potential problems with these types of connections. A questionnaire survey was conducted to assess the state of practice for precast prestressed concrete bridges made continuous. The survey provides valuable information on this type of bridge and updates a previous survey on this subject.     

桥梁板式橡胶支座局部脱空设计成因分析

经过对支座转角组合进行的分析,在研究柔性高墩墩顶转角位移计算方法的基础上,提出了更加严密的支座转角验算修正公式,得出修正后的转角验算公式易于应用的结论,对于保证板式橡胶支座在使用过程中不脱空有重要的意义。     

Prediction of scouring around an arch-shaped bed sill using Neuro-Fuzzy model

In this study, Adaptive Neuro-Fuzzy Inference System (ANFIS) has been used to model local scouring depth and pattern scouring around concave and convex arch shaped circular bed sills. The experimental part of this research study includes seven sets of laboratory test cases which were performed in an experimental flume under different flow conditions. A data set consists of 2754 data points of scouring depth were collected to use in the ANFIS model. The ratio of arch diameter, D, to flume width, W, is used as a non dimensional variables in all test cases. The results from ANFIS model were compared with the results of ANN model obtained by Homayoon et al. [24] and previously presented models. The results indicated that for D/W equal to 1 and 1.2, the ANFIS models produced a good performance for convex and concave bed sills. As a result, the ANFIS models can be used as an alternative to ANN for estimation of scour depth and scour pattern around a concave bed sill installed with a bridge pier.     

墩头超长实用堰泄洪安全分析及模型试验验证——以缅甸DAPEIN(Ⅰ)水电站工程为例

以缅甸DAPEIN(Ⅰ)水电站工程为例,论述了将WES实用堰的闸墩墩头向上游超长延伸之后,对泄洪安全所造成的影响。针对WES实用堰流量系数、堰面动水压力容易受边界因子影响的特点,对设计断面的堰顶布置和墩头形状进行了优化。根据堰面空化数计算公式及水流特性推导出计算的关键部位,对空化数进行计算。采用几何比尺为1∶60的物理模型对溢流堰的泄流能力和堰面动水压力进行了试验测试。试验结果表明:溢流堰的模型试验泄流能力和设计泄流能力非常相近。堰面动水压力除工况2的B4测点出现了-1.2 k Pa的微小负压值外,其余堰面时均压强值均大于0。从而,在泄流能力和堰面动水压力两方面都验证了这种设计方案的合理性。该工程所遇到的结构布置问题在中低溢流坝工程中属常见问题,解决思路可为今后类似工程建设借鉴参考。