Synthesis and characterization of a long side-chain double-cation crosslinked anion-exchange membrane based on poly(styrene-b-(ethylene-co-butylene)-b-styrene)

By choosing a triple block polymer, poly(styrene-b-(ethylene-co-butylene)-b-styrene) (SEBS), as the backbone and adopting a long side-chain double-cation crosslinking strategy, a series of SEBS-based anion-exchange membranes (AEMs) was successively synthesized by chloromethylation, quaternization, crosslinking, solution casting, and alkalization. The 70C16-SEBS-TMHDA membrane showed high OH⁻ conductivity (72.13 mS/cm at 80 °C) and excellent alkali stability (only 10.86% degradation in OH⁻ conductivity after soaking in 4-M NaOH for 1700 h at 80 °C). Furthermore, the SR was only 9.3% at 80 °C and the peak power density of the H₂/O₂ single cell was up to 189 mW/cm² at a current density of 350 mA/cm² at 80 °C. By introducing long flexible side chains into a polymer SEBS backbone, the structure of the hydrophilic–hydrophobic microphase separation in the membrane was constructed to improve the ionic conductivity. Additionally, network crosslinked structure improved dimensional stability and mechanical properties.     

关于硬件木马电路检测技术分析及发展趋势探讨

本文结合HTH电路的复杂性等特征分析与实际应用现状,研究了HTH电路的具体检测技术方法并对当前热点技术进行对比分析,探讨了HTH电路检测方法的技术发展趋势。     

Ceramics composites from iron ore tailings and blast furnace slag

The search for materials and methods capable of reducing human impacts on the environment is of utmost importance nowadays. This study's primary purpose was to analyze the technical feasibility of ceramic composites production utilizing Fundão Dam's Iron Ore Tailings (IOT), Blast Furnace Slag (BFS) from charcoal, and Foundry Sand (FS) as partial substitutes for the traditional raw materials – sand and clay – for application in building industry materials. The composites were molded in rectangular specimens and fired at temperatures of 900, 950, 1000, 1050, and 1200 °C. The developed materials were analyzed and characterized by X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), Thermogravimetry (TGA), and Differential Thermal Analysis (DTA). The obtained materials had flexural strength modulus of up to 12.19 MPa, water absorption ranging from 2 to 22%, linear shrinkage ranging from 0.02 to 6.50%, and apparent density ranging from 2.03 to 1.63 g/cm³. The study of the internal structure formation process revealed the formation of amorphous structures in the composites. The results demonstrated that these waste materials may be jointly used in construction materials, contributing to the reduction of natural resource extraction, besides enabling their correct disposal, minimizing environmental impacts, and improving the life quality of the surrounding communities.     

基于局部分型面的电器外壳注塑模具设计

电器外壳制品形状结构复杂,有两处侧凸(孔)较难处理。通过对矩形孔内侧凸的结构分析,在其局部设计了分型面,避免了使用侧向抽芯机构;对侧孔部位设计了斜顶杆侧向抽芯机构,其结构简单、紧凑。模具采用一模二腔、平衡式布局,采用经扁推杆由制品内部进料的潜伏式浇口,S型流道。在NX 8.0中完成了模具结构设计。经实践证明,该模具结构合理,产品合格。     

某住宅小区边坡渗水治理及综合利用

分析了某小区边坡渗水的原因，结合实际情况，介绍了边坡渗水的治理措施，并对渗水进行了收集综合利用，消除了边坡滑坡的安全隐患，取得了较好的社会效益和经济效益。     

控制爆破在复杂基坑开挖中的应用

在紧邻厂房中控室的基坑开挖中，根据复杂环境条件与施工要求，采用浅孔微差爆破并通过选取合理开沟掏槽位置来控制最小抵抗线方向以及控制一次最大起爆药量等措施，达到了控制飞石、降低爆破地震的效果，保证了爆破质量与爆破安全，提高了施工效率。     

洪家渡水电站工程高边坡综述

乌江洪家渡水电站坝址河谷深切300余m,硬质岩与软质岩相间分布,岸坡地形陡峻,软弱夹层发育,卸荷、崩塌等物理地质作用强烈。根据坝址地质条件与电站枢纽布置,工程存在:隧洞群进水口同向高边坡整体稳定问题;坝肩开挖、隧洞进出口开挖、厂房开挖及料场开挖等高边坡稳定问题;泄洪冲刷及雾化区1号、2号塌滑体高边坡稳定问题;王家渡堆料场、瓦房寨砂石系统高边坡稳定问题。因此,工程高边坡稳定问题是本工程的主要工程问题之一,但通过参建各方共同努力,本工程高边坡处理都取得了圆满成功。     

利用视电阻率饱和度法分析稠油油藏动用状况

为了弄清稠油油藏蒸汽吞吐井附近油层的动用状况．利用侧钻井视电阻率饱和度分析法，研究电阻减小率与含油饱和度的关系．以确定蒸汽吞吐井附近油层的动用状况。实践证明，该方法切实可行，为调油油田蒸汽吞吐阶段油层动用程度研究，提供了一条新途径。     

电站锅炉制粉系统的爆炸原因与防范对策

火力发电厂制粉系统爆炸事故时有发生 ,重大设备损坏 ,造成了严重的经济损失。本文通过分析研究 ,找出制粉系统爆炸的原因 ,从措施上、煤的质量控制上及制粉系统结构改造上提出了防范的对策。     

套管侧钻分支井钻井工程设计及应用原则

利用老井开窗侧钻分支井，可以提高原油采收率，增加产能和降低成本。对与分支井相关的分式设计。轨迹优化设计，钻柱设计，斜向器开窗方位的优化。开窗技术。轨迹控制应用等方面的主要原则进行了阐述。对进一步推广应用分支井技术，提高我国分支井钻井技术水平有一定的推动作用。