非稳定井流模型的半解析解

为了提高非稳定渗流计算的计算精度 ,通过数学分析得到了水位传导系数随时间变化时 ,一类非稳定渗流井流模型的半解析解 ,并进行了计算比较     

短模型上的明渠非恒定流试验

水工整体模型试验中,明渠非恒定流至今大多被简化为恒定流,而效果有时并不理想。本文指出,只要设置固定式曲线尾门,并有必要的动态量测设备,便可模拟原型非恒定流;即使模型偏短,也能得出比恒定流试验更接近原型的成果。在同一模型上,既做恒定流试验,又进行必要的非恒定流试验,二者相辅相成,必将有助于试验水平的提高。作为例证,本文介绍了泄洪调度导致航道水面波动的一项试验成果,并以岩基冲刷、通航水流条件、围堰过水、河床冲淤等研究课题为例,讨论了采用“短模型非恒定流试验方式”的必要性与可行性。     

V型尾门在河工模型试验中的应用

尾门是河工模型中常见的装置,也是水位控制的关键设备之一.该文作者根据多年的经验,研制了一种新式尾门--V型尾门.该尾门具有调节精度高、稳定性好、操作方便等优点.并在多个模型中应用,取得了良好的控制效果.文章介绍了V型尾门的制作要点,并结合试验数据论述具体应用效果.     

Extension of the QUASAR River-Water Quality Model to Unsteady Flow Conditions

A modification of the well-known water-quality model 'quality simulation along river systems'(QUASAR) is presented in order to extend its ability, so that it may be considered applicable under unsteady-flow conditions. An aggregated dead-zone travel-time parameter, based on (a) the kinematic wave velocity (celerity) of the flow wave and (b) the behaviour of the solute within so-called 'dead zones', has been incorporated into the existing model formulation. This extends the current continuously-stirred tank reactor-based model process to account for the behaviour of solute under unsteady-flow conditions. The enhanced water-quality model has been validated by application to the Colorado River.     

立管系统中严重段塞流的一维瞬态模型

严重段塞流主要出现在下倾管段、紧接有一上倾管段或立管段的气、液两相混输海底管道中。根据严重段塞流形成的4个阶段,从一维瞬态流体力学方程出发,建立了一个简化的、准平衡态的严重段塞流数学模型,该模型考虑了流体的物性及流动瞬态效应,可对严重段塞长度、段塞周期、流动速度、压力等特性参数的变化进行模拟。与其他瞬态多相流模型相比,本文模型具有数学模型简单、计算效率高的特点。数值模拟结果表明:当管径较小时,无论介质是空气和水,还是空气和油,由本文模型计算得到的段塞周期和压力结果都与实验数据吻合较好;当管径较大时,若介质为空气和水,则本文模型计算结果与OLGA软件模拟结果较接近;若介质为石油和天然气,在模拟工况范围内,除了小气量工况下偏差较大外,本文模型计算结果与OLGA软件模拟结果相比,段塞周期偏差在25%以内,压力偏差在10%以内;此外,用本文模型计算液塞生长阶段时间t1比Saga-tun模型模拟结果更接近实测结果。     

Sharkskin mechanism of high‐impact polystyrene (HIPS) and rheological behavior of HIPS/TiO2 composites

The rheological behaviors of high‐impact polystyrene (HIPS) and HIPS/TiO₂ composites were investigated by use of a rheometer in the present article. HIPS exhibited a constant critical stress of the sharkskin in various temperatures, and the analysis indicated that the mechanism of sharkskin of HIPS was wall–slip and its special temperature dependency was determined by weak wall–melt adsorption. The experimental results also showed that the introduction of TiO₂ into HIPS only slightly influenced the apparent viscosity (η_a) of the composites. Moreover, TiO₂ exhibited an unusual effect on the non‐Newtonian index of the composites at high shear rate. Both phenomena indicated the increase of inner free volume induced by TiO₂ in molecularly rigid HIPS. Moreover, it was noteworthy that a featured stress could be used to label the dispersion of TiO₂ in the HIPS matrix, and the numeric affinity of this featured stress and the critical stress of sharkskin revealed that both processes were relevant to the same molecular relaxation. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 802–807, 2005     

基于时域激光诱导辐射确定湍流火焰烟黑粒径

对非稳态丙烷湍流火焰中的烟黑粒径进行在线测量.高能脉冲激光直接照射火焰中的烟黑微粒,其受热辐射光谱信号由光电倍增管检测.为降低信号噪音,采用分段平均方法拟合获得烟黑等亚微米量级固体颗粒粒径.所得结果与透射电镜测量结果吻合.通过统计多个激光脉冲下颗粒各粒径值,获得了不同空燃比下丙烷湍流火焰中烟黑粒径分布的变化规律.本方法为非稳态燃烧过程中可吸入颗粒物尺寸分布提供了一种有效的在线监测手段．     

南水北调中线小南河串流片防洪水位计算

传统的多河流串流计算主要采用水库联调的方法,把串流的各条河流概化为静态水库,库水位水平且不考虑横向流动。为解决串流区水流的横向流动及水面线并不总像库水位一样水平的问题,采用二维非恒定流数学模型计算串流区洪水演进。通过概化地形、考虑入流、糙率、边界条件和水流的横向流动等因素,计算出了整个串流区域的水面线、水深、流速、出流等水力要素,并给出洪水演进模拟图,为确定河流与总干渠交叉建筑物的规模、总干渠左岸沿线水面线和对沿线村庄、农田的防洪影响提供了可靠的依据。     

The State of the Art in Topology‐Based Visualization of Unsteady Flow

Vector fields are a common concept for the representation of many different kinds of flow phenomena in science and engineering. Methods based on vector field topology are known for their convenience for visualizing and analysing steady flows, but a counterpart for unsteady flows is still missing. However, a lot of good and relevant work aiming at such a solution is available. We give an overview of previous research leading towards topology‐based and topology‐inspired visualization of unsteady flow, pointing out the different approaches and methodologies involved as well as their relation to each other, taking classical (i.e. steady) vector field topology as our starting point. Particularly, we focus on Lagrangian methods, space–time domain approaches, local methods and stochastic and multifield approaches. Furthermore, we illustrate our review with practical examples for the different approaches.     

非定常固液两相流对双流道泵磨损性能的影响

基于Mixture多相流模型和RNG k-ε湍流模型,应用Fluent软件对双流道泵内非定常固液两相流进行了数值模拟,并分析了两相流对双流道泵磨损性能的影响。结果表明：泵的扬程和效率均随时间变化呈现正弦性规律;固相颗粒主要集中在叶轮前、后盖板和蜗壳进口前壁面处;叶轮后盖板中间凸起部位发生严重冲击磨损,其他区域均发生滑动磨损;蜗壳壁面均发生滑动磨损,而隔舌部位发生较为严重的冲击磨损。研究结果可为双流道泵的性能预测和优化提供一定的理论支撑。