Deposition of UF5 on the surface of steel material having oxide coating in contact with gaseous UF6

When UF6 is handled in leak tight system, the amount of uranium compound formed on the surface of containers, valves, and others in UF6 handling facilities is not so significant for a short term that special attention has not been given to this problem. The present work was done to throw some more light on this problem based on the recent experiment. We discuss the possibility that the intermolecular transfer of a fluorine atom from UF6 to UF5 may participate in the formation of uranium compound. The discussion includes also the unique features contained in the experimental result, the reaction processes assumed in this problem, and the derivation of a rate equation for expressing the deposition of uranium compound. Furthermore, we propose a new method for determining nonlinear parameters included in a governing differential equation having two variables for expressing the deposition of uranium compound from experimental raw data.     

掺杂聚苯胺导电膜的制备及对核设施表面铀的去污

制备了掺杂导电聚苯胺可剥离膜，首次采用涂膜、电解联用去污方法，进行涂膜电解去除渗透到核设施金属材料内部形成氧化物的铀。在膜中，聚苯胺、盐酸、EDTA-2Na含量各为4％、0．5％～1%、1％；电解电压2．3V、电解时间25min～30min时，其去污率可达99％，优于其它的方法。     

HNO3和有机介质中U（Ⅳ）的稳定性研究

研究了ＨＮＯ＿３和ＴＢＰ－煤油介质中Ｕ（Ⅳ）的稳定性。测定了两种介质中Ｕ（Ⅳ）、ＨＮＯ＿３、ＴＢＰ浓度和气相中氧浓度对Ｕ（Ⅳ）氧化速率的影响。Ｕ（Ⅳ）的氧化速率都随温度提高而明显增加．其表观活化能分别为９１ｋＪ／ｍｏｌ（ＨＮＯ＿３介质）和４２ｋＪ／ｍｏｌ（ＴＢＰ－煤油介质）。对两种介质中Ｕ（Ⅳ）的氧化速率规律进行了比较。     

后遥感应用技术的提出与思考

本文在总结遥感技术应用于铀矿地质领域的实践和遥感技术最新进展的基础上。提出后遥感应用技术，并对其技术内涵、研究内容、建立试验样区、研究意义等进行了探讨。     

Different insights for improving part and system reliability obtained from exactly same DFOM “failure numbers”

Techniques for improving the reliability and maintainability of both nonrepairable and repairable items can be suggested by failure data analysis. It is shown that a given set of failure numbers leads to very different improvement strategies when the numbers are the times-between-successive-failures of one or more repairable items, rather than the times-to-failure of nonrepairable items. Since this should have been obvious more than 50 years ago, at the onset of formal reliability engineering activities, several reasons are proffered for the widespread and protracted misinterpretation of even the most basic—and simple!—conceptual and practical differences between nonrepairable and repairable items.     

铀表面初始氧化行为的电子能量损失谱研究

利用俄歇电子能谱仪获取了表面清洁的铀及其在氧化过程中的电子能量损失谱(EELS)，研究这些电子能量损失谱线显示：清洁表面铀的等离子损失的实验值与理论值较为符合；随着氧化程度的加剧，体等离子体(BP)、表面等离子体(SP)以及价带间跃迁所造成的电子能量损失峰发生了明显的连续偏移和强度的变化，表明室温下清洁表面铀暴露微量纯氧后，在铀表面上发生了U→UO→UO2初始氧化过程。同时，又采用了俄歇电子能谱(AES)和X射线光电子谱(XPS)对照分析了铀的初始氧化过程。     

A fuzzy diagnosis approach using dynamic fault trees

By incorporating digraph models, fault trees and fuzzy inference mechanisms in a unified framework, a novel approach for fault diagnosis is developed in this work. To relieve the on-line computation load, the fault origins considered in diagnosis are limited to the basic events in the cut sets of a given fault tree. The symptom occurrence order associated with each root cause is derived from system digraph with the qualitative simulation techniques. The implied candidate patterns are enumerated according to two proposed theorems and then encoded in the inference system with IF-THEN rules. The simulation results show that the proposed approach is not only feasible but also capable of identifying the most likely cause(s) of a hazardous event at the earliest possible time.     

河台金矿云西矿区富矿包地质特征及赋存规律

通过对矿体地质特征及富矿包地质特征的阐述, 分析归纳出富矿包赋存规律: 构造叠加部位和糜棱岩宽大膨胀部位等往往是富矿包赋存的有利部位。其表象特征为构造发育, 细粒他形硫化物富集。     

超临界CO2处理后的金属铀表面氧化腐蚀和电化学腐蚀实验研究

采用重量法和电化学方法分别得到表面经超临界CO2处理后的铀试样在60℃、70％RH条件下的氧化动力学曲线(△m-t)和在50μg/g Cl^-溶液中的阳极极化曲线、自腐蚀电流等抗蚀评价指标。结果表明：经超临界CO2处理后，金属铀表面抗氧化腐蚀性能和抗化学介质腐蚀性能均有一定程度提高。对钝化膜提高金属铀表面抗腐蚀性能的原因进行了探讨。