AUTOCAM简介及其初步使用的心得

一般来说,新闻直播中镜头是固定的,不需要太多的操作。如今,使用可远程遥控的摄像设备已成为一个热点。本文主要以东方卫视为例,从选型、使用及日常维护等方面,对对AUTOCAM的进行简单介绍。     

Vital-Fluorochromization of Microorganisms Using 3′,6′-Diacetylfluorescein to Determine Damages of Cell Membranes and Loss of Metabolic Activity by Ozonation

Cell suspensions of Escherichia coli as a model for bacterial populations in wastewaters were treated with ozone as a disinfectant in a continuously operated pilot plant with a plug flow reactor. Suspensions with an initial number of CFU (colony forming units) of 10⁸ mL^?1 were ozonized with ozone concentrations up to 12 mg/L. Metabolic activities and membrane functions break down with increasing ozone concentrations. The fluorochromization using 3′,6′-diacetylfluorescein (FDA) proved to be a suitable method for the detection of an alteration in permeability of the cell membranes and an inactivation of metabolic activity. By fluorescence microscopic and photometric investigations it could be clearly demonstrated that, in the case of disinfection with ozone, inactivation of the cells includes first of all a damage of the cell membranes. In contrast to the determination of the number of CFU, fluorochromization allows the detection of alteration in metabolic activities.     

亲电聚合路线合成聚醚醚酮酮砜的研究

用4,4′-二苯氧基二苯砜(DPODPS)分别与对苯二甲酰氯(TPC)、间苯二甲酰氯(IPC)或2,5-二氯对苯二甲酰氯(DCC)在1,2-二氯乙烷(DCE)中,以无水 AlCl_3为催化剂,在 N-甲基吡咯烷酮(NMP)存在下,通过付-克亲电聚合反应,制得了五种不同结构的聚醚醚酮酮砜(简称PEEKKS)。用红外光谱(IR)、X-射线衍射(XRD)、扫描电镜(SEM)、差示扫描量热(DSC)、热重(TG)及耐溶剂试验,对聚合物进行了表征。结果表明,五种聚合物的对数比浓粘度(η_(inh))均达到0.85以上.具有较低的熔融温度、良好的溶解性能和耐高温性能,PEEKKS 属于非晶态聚合物。     

Preparation of High Strength and Toughness Aramid Fiber by Introducing Flexible Asymmetric Monomer to Construct Misplaced-Nunchaku Structure

High performance fibers with high strength and toughness have great potential in composites, but contradiction between tensile strength and elongation at break makes the preparation to become a current challenge. Herein, an asymmetric structure of more flexible diamine, 3,4′-diaminodiphenyl ether (3,4′-ODA), is introduced into heterocyclic aramid (PBIA) fibers to replace rigid symmetric p-phenylenediamine (PDA). By studying the properties of copolymer (mPEBA) fibers with different ratios of diamine, it is found that the mPEBA fiber reached the optimal mechanical properties with the 30% content of 3,4′-ODA. Compared with homopolymerized heterocyclic aramid fibers, the tensile strength and elongation at break of mPEBA fiber are improved by 26.2% and 38.7%, respectively. Results of X-ray diffraction show that the introduction of 3,4′-ODA structure can increase stretchability of mPEBA fibers, improving the orientation degree during hot-drawing. Molecular dynamics simulations confirm that 3,4′-ODA structure undergoes a conformation transformation to form a straightened chain during hot-drawing, while symmetrical 4,4′-diaminodiphenyl ether (4,4′-ODA) cannot form the same conformation. The misplaced-nunchaku structure is formed based on the special meta-para position of 3,4′-ODA, achieving the synergy of high strength and high toughness.     

Chemical Labeling of Protein 4′-Phosphopantetheinylation

Nature uses a diverse array of protein post-translational modifications (PTMs) to regulate protein structure, activity, localization, and function. Among them, protein 4′-phosphopantetheinylation derived from coenzyme A (CoA) is an essential PTM for the biosynthesis of fatty acids, polyketides, and nonribosomal peptides in prokaryotes and eukaryotes. To explore its functions, various chemical probes mimicking the natural structure of 4′-phosphopantetheinylation have been developed. In this minireview, we summarize these chemical probes and describe their applications in direct and metabolic labeling of proteins in bacterial and mammalian cells.     

四异丁氧基镍酞菁的合成及其溶剂效应

4 异丁氧基邻苯二腈与氯化镍在强有机碱 1 ,8 二氮杂双环 (5 ,4,0 )十一碳烯 7催化下反应 ,合成了四异丁氧基镍酞菁 ,产物经FT -IR、元素分析、UV -Vis吸收光谱和1 H NMR表征了结构 ;并研究了其溶剂效应 ,结果表明 :最大吸收峰波数ν与函数 f(n ,ε)存在一定的线性关系 ,线性相关系数为 0 940 2 ,而Bayliss函数项 (n2 - 1 ) /(2n2 +1 )决定了最大吸收波长 (λmax)的位移变化 ;化合物的λmax在不同溶剂中随聚集程度增加 ,发生一定程度的蓝移     

2-苯基-1,2-苯并异硒唑-3-(2H)-酮的合成研究

在N2保护下,采用水合肼的碱性水溶液还原硒粉制备了K2Se2,不经分离直接与邻氨基苯甲酸的重氮盐反应得到了中间体2,2'-二硒化苯甲酸;在环合反应合成2-苯基-1,2-苯并异硒唑-3-(2H)-酮(Ebselen)时改用了乙醚-水为反应体系,K2CO3水溶液作为副产物HCl的吸收剂,促使胺解关环反应顺利进行,产物易分离、纯化得2-苯基-1,2-苯并异硒唑-3-(2H)-酮。     

3-氯-4-（2-溴甲基-4-甲基-1，3-二恶戍烷-2-基）苯基-4’-氯苯基醚的合成

3-氯-4-（2-溴甲基-4-甲基-1，3-二恶戍烷-2-基）苯基-4’-氯苯基醚是杀菌剂苯醚甲环唑的一个重要中间体。以2-氯-4-（4-氯苯氧基）-苯乙酮为起始原料，采用溴化和合环同时进行的合成工艺制得该化合物，收率90％．产品含量95％。优化了反应条件，简化了操作。     

超滤-反渗透集成工艺处理玉米酒糟废水

研究了玉米酒精生产过程中产生的玉米酒糟废水的膜分离过程,开发了处理玉米酒糟废水的超滤-反渗透集成工艺。超滤选用截留相对分子质量为6 000的GR81PP膜平板分离器,入口压力控制为0.6 MPa,操作温度为50℃;反渗透选用标准脱盐率为90%的ESNAI-4040卷式膜分离器,入口压力控制为2.2 MPa,操作温度为40℃。反渗透透过液中蛋白质的平均截留率为94.70%,甘油的平均截留率为65.15%,COD值降到1 000 mg/L左右,可作为工艺回用水,而且反渗透浓缩液中可回收甘油等有用物质,超滤浓缩液可浓缩成饲料,节能效果显著。     

N,N′-乙撑双[N(乙磺酸钠)-十二酰胺]的合成与性能评价

以乙二胺、2-氯乙基磺酸钠、月桂酸等为原料合成了N,N′-乙撑双[N(乙磺酸钠)-十二酰胺](简记为DTM-12)。以IR和1HNMR对其结构进行了初步表征。该目标产物水溶液的CMC(0.5 mmol/L)分别是十二烷基硫酸钠和十二烷基磺酸钠的1/16和1/20,γCMC(29.7 mN/m)低8~9 mN/m。DTM-12分别与十二烷基三甲基溴化铵(DTAB)和辛基酚聚乙氧基醚9-10EO(Triton X-100)组成的复配体系在摩尔比为3∶7时,CMC达到0.106和0.049 mmol/L,γCMC达到25.4和31.7 mN/m,优于十二烷基磺酸钠组成的复配体系。DTM-12还具有良好的起泡性和稳泡性。