用轴向气胎式离合器,制动器改造旧飞剪

采用轴向式气胎离合、制动器，改造了旧飞剪，解决了原剪机电磁离合、制动器控制不准确的问题；该剪机改造后在成品轧机后使用，剪切用１２０ｍｍ×１２０ｍｍ坯生产的大规格产品（１８ｍｍ以上），增产、增效，年总经济效益为９７．８万元     

Numerical simulation of typical contact situations of brake friction materials

In the paper, a model typical for contact situations of automotive brakes is established based on the method of movable cellular automata. The processes taking place at local contacts in an automotive brake system are analysed. Based on microscopic and micro-analytical observations, the following contact situations were simulated: (i) a couple of ferritic steel against pearlitic steel, both covered by an oxide layer mixed with graphite nanoparticles and (ii) the same situation but without oxide layers. The results of calculated mean coefficients of friction of the oxide-on-oxide contact correspond well to expected values for a real braking system, whereas steel-on-steel contact are twice as high. This allows one to make some conclusions; for example, oxide formation will take place more quickly than friction layer elimination, and finally this is responsible for the stabilisation of the coefficient of friction.     

提升机液压站及制动系统故障分析

通过对TE121液压站及制动系统常见的故障分析,提出解决方案。     

专用集成电路CAT技术的进展

本文简单地回顾了提高VLSI测试效率所采用的一些手段,讨论了在ASIC测试问题研究中出现的一些新观点、新方法、新动向,以及所取得的成果。在此基础上,文章阐明了ASIC测试技术的发展方向,并着重论述了可望在未来得到发展的,针对ASIC的功能测试方法。     

微电子电路PC机辅助教育系统

文章介绍法中两国合作开发的微电子电路计算机辅助教育系统中的两部分，重点陈述其中的辅助测试虚拟仪器和专用实验芯片，期望对电子测试领域的教育工作者和科技工作者有所启发。     

机械制造技术实践教学的探索

为提高高职学生的技术应用能力，机械制造技术作为机械制造专业的主干课，应配合不同阶段，形式多样的实践教学。本对机械制造技术实践课程的实施作了一定程度的探索，提出了一些可行性建议。     

RESEARCH ON DESIGN METHOD OF A MULTIPLE DISC WET BRAKE IN LUBRICATED ENVIRONMENT

The rmomechnical phenomena occurring between friction pairs greatly change the distributions oflining pressure and friction surface temperature of a multiple disc wet brake. It has become one of the maincauses of brake failure. In order to understand these thermomechanical phenomena, several design and mate-rial factors tha have great influence on thermomechanical phenomena, such as heat transfer coefficient, fric-tion factor, sliding velocity initial lining pressure and so on, are analyzed. An isothermal design method isproposed for designing a multiple disc wet brake.     

钢丝绳牵引胶带输送机动力制动系统改造

介绍了钢丝绳牵引胶带输送机制动系统改造方案前、后的对比。     

Effect of temperature on recombinant protein production using the Bm5/Bm5.NPV expression system

A series of experiments have been conducted using a recombinant baculovirus/insect cell expression system (Bm5/Bm5.NPV.CAT) to establish the optimum temperature for both cell growth and virus infection. Bm5 cell growth was found to be limited at temperatures below 22°C and ceased completely at temperatures above 34°C. In the range between 24 and 28°C, final cell densities always reached 96% of the highest achievable viable cell density. The shortest population doubling time was obtained at 28°C. Overall, a consistent increase in metabolism with increasing temperatures was observed. During the infection/viral replication phase, an increase in the temperature from 25 to 31°C resulted in a faster decrease in viable cell density and an earlier production of chloramphenicol acetyltransferase (CAT). Furthermore, protein yield at temperatures above 28°C was significantly reduced. Overall, the best temperature for the infection phase for the Bm5/Bm5.NPV expression system was found to be 25°C when the cells are cultured in serum free media.     

气控盘式辅助刹车在车载钻机中的应用分析

在对比分析了传统辅助水刹车与气控盘式辅助刹车的特性后,重点对气控盘式辅助刹车进行了数学分析,得到了该辅助刹车的制动扭矩取决于施加的气体压力,与钻具质量无关,冷却液的流量应同钻柱质量保持正比关系,可精确控制下钻速度并易于实现自动送钻功能。得出了气控盘式辅助刹车更适用于车载钻机的结论。