DTA measurements of normal-incommensurate phase transition in (NH4)2ZnCl4 and K2ZnCl4 crystals

Differential thermal analysis (DTA) was applied to determine the changes in enthalpy and entropy of (NH₄)₂ZnCl₄ and K₂ZnCl₄ crystals at their phase transition from the orthorhombic normal phase to the incommensurate phase. The temperature of this transition, T _i , is 406 K for (NH₄)₂ZnCl₄ and 555 K for K₂ZnCl₄ and the entropy changes (S/R) are 0.053 and 0.035, respectively. The low value obtained for S/R is characteristic of incommensurate phase transitions. The results were compared with the data reported for other crystals of the A₂BX₄ family. Thermal properties of the crystals of the A₂ZnCl₄ subgroup were found to the correlated with the length of A-Cl bonds.     

LIQUIDUS OF Au-Cu-Si SYSTEM

The diagram of system Au-Cu-Si was constructed from data of 9 internal sections by DTA in an atmosphere of dry N_2.The composition of ternary eutectic point melting at 337℃ lies in Au(74.7)-Cu(6.1)-Si(19.2) at.-%.The liquidus of the 3 side-binary systems have been redetermined.     

Thermal stability behaviors of Cr(N,O)/CrN double-layered coatings by TGA/DTA analysis

In this study, Cr(N,O)/CrN double-layered coatings were synthesized using the cathodic arc deposition (CAD) process. CrN film was first deposited onto a substrate as an interlayer to ensure better adhesion, and Cr(N,O) film was subsequently deposited on top of the CrN layer as the surface layer. Variation in the Cr(N,O) coating composition was achieved through changing the O₂/N₂ flow ratio during the last stage of processing. Phase structure, chemical composition, and morphology of the resulting coatings were analyzed and observed using the X-ray diffractometer, Auger electron spectrometer and SEM. In addition, oxidation behavior of the coatings was investigated using TGA/DTA methods. The tests were carried out by increasing temperature up to 1000 °C in ambient air. With the introduction of oxygen gas during the CAD process, a superficial layer was produced in the Cr(N,O) constituent containing CrN and Cr₂O₃ phases. The formation of the oxide phase attributed to the reaction of chromium and oxygen was more favorable than that of chromium and nitrogen. The results also showed that Cr(N,O)/CrN double-layered coatings exhibited superior oxidation resistance at elevated temperature than that of CrN single-layer coated specimen (870 °C vs. 750 °C).     

TG and DTA investigation of ZrO2–SO 4 2– catalysts exposed to hexane, methylcyclopentane and cyclohexane

ZrO₂– catalysts with different sulfur contents were analysed with thermal methods coupled with mass spectrometry after exposure to mixtures of hexane, methylcyclopentane, and cyclohexane in argon. The reaction of the hydrocarbons led to carbonaceous deposits, but an important part of hydrocarbon remained chemisorbed as well. Heating these samples in He atmosphere provoked the decomposition of these deposits with evolution of CO₂ and CO, and also of SO₂ and SO. At the same time, COS was evidenced in the reaction products. The release of these molecules occurred below the activation temperature of the catalysts. The behavior of the catalysts depended both on reactant molecule and sulfur content. The analyses clearly evidenced the oxidation ability of ZrO₂–SO catalysts. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermal characterization of n‐alkyl maleate‐styrene‐allyl propionate terpolymers

Thermal characterization of maleic anhydride‐styrene‐allyl propionate (MA‐St‐AP) terpolymer and its ester derivatives named as n‐alkyl maleate and shown as nPr MA‐St‐AP, nBu MA‐St‐AP, nPn MA‐St‐AP, and nBz MA‐St‐AP was carried out. The thermal characterization was performed using thermal analysis techniques such as TGA, DTA, DSC, and TMA. Different results were observed between the original terpolymer and its ester derivatives. Thermal stabilities of the terpolymer and its ester derivatives were compared by using various measurements plotted as TGA, DTA, DSC, and TMA curves. The increase in the alcohols' carbon numbers added to the original terpolymer results in ester derivatives with different thermal stability behavior. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 600–604, 2007     

接枝共聚物PP-g-MAH的差热分析及粘接性能的研究

本文对反应挤出法制得的接枝共聚物PP-g-MAH进行了差热分析，并且研究了PP-g-MAH与极性基材铝片的粘接性能。研究发现，接枝共聚物PP-g-MAH与PP相比，熔融温度Tm和结晶温度Tc都有所增大，接枝共聚物的接枝率对剪切强度有明显影响，研制的PP-g-MAH可使剪切强度达9．0MPa。     

端氨基聚脲聚氨酯环氧树脂体系的固化反应及粘接性能

本文采用DTA和FT-IR研究了端氨基聚脲聚氨酯固化环氧树脂的反应特性,考察了被粘表面状态、偶联剂和促进剂、填料等对剪切强度性能的影响。并对该粘合剂耐化学腐蚀性进行了试验,说明具有好的耐腐蚀性。     

The role of charcoal on DTA curves of organo-clay complexes: an overview

DTA of organo-clay complexes supplemented by other thermal analysis methods supplies information on the thermal reactions, properties and stability of the complex, the amount and properties of the adsorbed water in the organo-clay and on the bonding between the organic species and the clay. It is used to identify the mineral to differentiate between various complexes composed of the same clay and the same organic ligand and to establish their composition. During the gradual heating in oxidizing atmospheres the adsorbed organic material is oxidized, giving rise to significant exothermic peaks. DTA curves of organo-clays are divided into three regions: (1) the dehydration of the clay, (2) the thermal oxidation of the organic material and (3) the dehydroxylation of the clay. The exothermic oxidation reaction occurring during the gradual heating of the sample takes place in two steps, in the range 200–500 °C, oxidation of organic hydrogen and formation of water and charcoal, and 400–750 °C, oxidation of charcoal and formation of CO₂. The exothermic peak temperatures depend on the mineral and on the organic compound and on the types of bonding between these two components of the organo-clay complex. The present communication concentrates in the role of the combustion of charcoal in the study of the fine structure of the complex and of the type of associations between the organic compound and the clay.     

邯郸膨润土的特征研究

采用化学成分分析、X-射线衍射分析、红外光谱、差热分析和扫描电镜等分析方法,研究了邯郸膨润土的特征。分析结果显示,邯郸膨润土是一典型的钙基膨润土,蒙脱石含量50%左右。进行人工钠化改性所获得的膨润土具有天然钠基膨润土同样的特性。     

借助差热分析研究镍基高温合金/陶瓷型壳界面反应

借助差热分析研究镍基高温合金/陶瓷型壳的界面反应,分别从热力学和动力学的角度分析出镍基高温合金叶片在生产过程中陶瓷型壳所需的最佳面层涂料是CoAl2O4.