Mineralization of Para-Chlorobenzoic Acid in Water by Cobalt-Incorporated MCM-41 Catalyzed Ozonation

Cobalt-incorporated MCM-41(Co-MCM-41) was used as a heterogeneous catalyst for the ozonation of para-chlorobenzoic acid (p-CBA) in aqueous solution. Cobalt oxide supported on MCM-41(Co/MCM-41) was synthesized for comparison. Their textural properties were elucidated by various characterization techniques to understand the relationship between surface texture and catalytic activity. TOC removal at 60 min reached 91% with Co-MCM-41, 83% with Co/MCM-41 and only 52% with ozone alone, respectively. Observations from diffuse reflection spectroscopy demonstrated that different metal phases were formed in these cobalt-modified molecular sieves samples. Radical scavenger experiments indicated the formation of hydroxyl radicals that were responsible for the effective degradation of p-CBA. An integrated approach to the catalytic mechanism was proposed by considering the variation of pH in the course of ozonation as well as its subsequent influence on the dissociation of targeted compounds and surface charge of the catalyst. In the reusability experiments, the reused Co-MCM-41 was able to regain the same catalytic capability as the fresh one within 5 cycles. X-ray photoelectron spectroscopy results indicated that a part of Co²⁺ was oxidized to Co³⁺ after oxidation reaction.     

Pilot Plant Study of Simultaneous Sewage Sludge Digestion and Metal Leaching

This research is related to a preindustrial pilot scale study of the performance of the simultaneous sewage sludge digestion and metal leaching (SSDML) process for decontamination and stabilization of sewage sludge. Ten batch tests were carried out in two 4?m3 bioreactors under various conditions of operation. Results indicated that the addition of 1.0 to 1.5?g?S0/L, which is the equivalent of approximately 30 to 50?kg?S0 per tons dry sludge, is sufficient to obtain conditions of acidity (pH<2.5) and oxido-reduction potential greater than 500 mV necessary for an effective solubilization of toxic metals. The final average of metal solubilization in the output sludge during the SSDML process varied in the following ranges: 25–78% Cd, 9–32% Cr, 48–100% Cu, 77–99% Mn, 15–53% Ni, 12–47% Pb, and 66–100% Zn. The N, P, and K contents were also preserved in the decontaminated sludge. Moreover, the use of low concentrations of elemental sulfur makes it possible to obtain decontaminated sludge with a low total sulfur content (1.4–1.5% S) compatible with agricultural use. The suspended solids removal calculated for the SSDML process was slightly lower, (2.5±0.4)% volatile suspended solids per day, than those reached using standard aerobic digestion. Finally, the SSDML process was found to be effective in removing bad odors and in the destruction (99–100%) of indicator bacteria.     

铜铅锌银多金属矿湿法分离新工艺

依据不同金属硫化物氧化分解电位的差异 ,针对某含铜、铅、锌、银复杂多金属硫化矿的难选冶特性 ,对浮选获得的混合精矿采取在线控制浸出过程氧化还原电位的方法 ,分步选择性氯化浸出各有价元素 ,并辅之以沉淀、置换、萃取等工艺 ,使有价金属以较高的回收率得到了有效的分离提取 ,在各工序最佳条件下 ,Cu、Pb、Zn、Ag各金属的浸出率均大于 99 0 % ,元素硫的回收率大于 76%     

An investigation into physicochemical characteristics of ash produced from combustion of oil palm biomass wastein a boiler

Ash derived from combustion of Malaysian oil palm biomass (empty fruit bunches consisting of fibers) was physically and chemically characterized in order to provide a comprehensive understanding of its specific properties in terms of toxicity, compositions and reusability. Principal analyses conducted include particle size distribution, scanning electron microscopy, elemental dispersive X-ray, elemental analysis, toxicity characteristic leaching procedure (TCLP) as well as thermogravimetric, X-ray diffractometry and Fourier-transform infrared analyses. TCLP result indicated that the oil palm ash (OPA) should not be classified as toxic wastes in terms of heavy metal leachability since leachable copper, cadmium, lead and nickel concentrations were detected below the stipulated leachability limits. It was determined that the OPA contained high amount of potassium as well as presence of silica which implied its suitability to be reused as crude fertilizer or cement replacement material.     

Comparison of copper emission rates from wood treated with different preservatives to the environment

This study describes a laboratory method for the estimation of emission from preservative-treated wood in the different situations where emissions could enter the environment for use classes 3 (not in contact with ground) and 4 and 5 (in contact with the ground, fresh water or sea water) according to OECD Guidelines. Samples of scotch pine sapwood (Pinus sylvestris L.) were treated with CCA (1% and 2%), ACQ-1900 (3% and 7%), ACQ-2200 (2%), Tanalith E 3491 (2% and 2.8%), and Wolmanit CX-8 (2%).     

七九四矿原地破碎堆浸采铀试验研究简况

本文简要介绍了七九四矿原地破碎堆浸采铀的试验情况，分析了可行性和应研究解决的若干问题。     

X-ray microtomography: Application to microstructure analysis of a cementitious material during leaching process

Leaching of cementitious materials leads to an increase in porosity, which has important consequences on transport and mechanical properties. The present study outlines the characterization of microstructural evolution in a mortar subjected to a chemical attack, by means of a powerful non-intrusive experimental method, namely synchrotron X-ray computed microtomography. This innovative method is used to measure the variation of porosity in a leached mortar. Having described the effects of leaching in mortar (influences on microstructure and on mechanical properties), we present the accelerated leaching process and the microtomographic analysis that have been used to monitor it. We then investigate the capacity of this method to quantify the evolution of porosity during the leaching process. The method is validated by comparison of the results obtained with data available in the literature.     

过一硫酸的合成及其在铀水冶中的应用

文章介绍了选择过一硫酸合成的最佳条件及进行生产的可行性。介绍了过一硫酸用于含铀煌斑岩、辉绿岩、花岗岩及炭板岩矿石提取铀时,与常规酸浸方法对比,有很好的经济效益和对环境的保护价值。     

外源有机磷在黄棕壤中的淋溶和转化特征

采用Bowman和Cole提出的有机磷分级体系,分3个灌水量对外源活性有机磷β-甘油磷酸钠在黄棕壤中的淋溶和转化特征进行了研究。结果表明,大于50mm的灌水量可以使β-甘油磷酸钠发生淋溶。施入黄棕壤中的β-甘油磷酸钠在24h内可以转化为速效磷和中活性有机磷,灌水量愈大,速效磷和中活性有机磷积累的土层也愈深。中稳性有机磷和高稳性有机磷含量没有明显变化。     

Study of the copper leaching in the wet oxidation of phenol with CuO-based catalysts: Causes and effects

Catalytic wet oxidation of phenol as a model pollutant has been performed in a three phase fixed-bed reactor (FBR) by using a commercial catalyst based on copper oxide in order to analyze the variables affecting significantly the copper leaching. It has been found that temperature has an almost negligible influence in the range studied (70–160 °C). On the contrary, an important effect of the pH value was noticed. The copper leaching reduces when the pH of the solution fed to the reactor increases, being almost negligible at pH ≥ 5. Moreover, the composition of the reaction media also influences the leaching. Higher copper concentrations than those expected by the effect of the acid aqueous media have been measured in the reactor effluent when phenol, catechol, hydroquinone, p-benzoquinone and maleic acid are present in the reaction media. On the contrary, oxalic acid has a negative influence on the leaching, since it captures the copper in solution to form copper oxalate which precipitates on the catalyst surface. For a previously acidified medium, the acetic and formic acids do not have any other effect on the copper leaching. It has been also demonstrated that as copper in solution decreases, so does phenol conversion, because the homogeneous catalysis contributes significantly to the oxidation reactions even in fixed-bed reactors.