活性炭吸附法分离铼钼的研究

介绍了活性炭吸附法分离铼和钼 ,实验表明调整吸附液的pH值能使铼钼有效分离 ,当pH >8.2时 ,分离系数SRe Mo　　 >3 0 42 ,铼的吸附符合Freundlich等温式。     

Nanostructured component fabrication by electron beam-physical vapor deposition

Fabrication of cost-effective, nano-grained net-shaped components has brought considerable interest to Department of Defense, National Aeronautics and Space Administration, and Department of Energy. The objective of this paper is to demonstrate the versatility of electron beam-physical vapor deposition (EB-PVD) technology in engineering new nanostructured materials with controlled microstructure and microchemistry in the form of coatings and net-shaped components for many applications including the space, turbine, optical, biomedical, and auto industries. Coatings are often applied on components to extent their performance and life under severe environmental conditions including thermal, corrosion, wear, and oxidation. Performance and properties of the coatings depend upon their composition, microstructure, and deposition condition. Simultaneous co-evaporation of multiple ingots of different compositions in the high energy EB-PVD chamber has brought considerable interest in the architecture of functional graded coatings, nano-laminated coatings, and design of new structural materials that could not be produced economically by conventional methods. In addition, high evaporation and condensate rates allowed fabricating precision net-shaped components with nanograined microstructure for various applications. Using EB-PVD, nano-grained rhenium (Re) coatings and net-shaped components with tailored microstructure and properties were fabricated in the form of tubes, plates, and Re-coated spherical graphite cores. This paper will also present the results of various metallic and ceramic coatings including chromium, titanium carbide (TiC), titanium diboride (TiB₂), hafnium nitride (HfN), titanium-boron-carbonitride (TiBCN), and partially yttria stabilized zirconia (YSZ) TBC coatings deposited by EB-PVD for various applications. This paper was presented at the International Symposium on Manufacturing, Properties, and Applications of Nanocrystalline Materials sponsored by the ASM International Nanotechnology Task Force and TMS Powder Materials Committee, October 18–20, 2004, Columbus, OH.     

Activities of MFI-Supported Rhenium Catalysts for the Aromatization of Methane: Effect of Cationic Form of the Inorganic Carrier

MFI type inorganic carrier was used in two different cationic forms, hydrogen and calcium respectively. MFI-supported molybdenum and rhenium catalysts were prepared. The activities of the catalysts were compared for the aromatization reaction of methane. Higher activity values were attained with the catalysts supported on HZSM-5. Aromatics were also observed with the catalysts supported on CaZSM-5, despite their deficiency in acid sites. Highly dispersed rhenium is expected to be formed with the use of the inorganic carrier in calcium form. On the other hand, lower reaction rates were observed with rhenium supported on CaZSM-5, in spite of the improved dispersion of the active rhenium species on this catalyst. This was interpreted in terms of the critical role of the acid sites in the conversion of methane to aromatics, compared to the improved dispersion of the active metal.     

锝萃取型发生器萃取锝初探

锝萃取型发生器技术是采用溶剂萃取的方法生产^99Tc^m。对锝萃取工艺条件进行了初步研究。由于锝与铼有相似的化学性质,实验中研究了在碱性体系中甲乙酮对铼的萃取行为,考察了萃取剂用量、碱液浓度、铼的浓度及水相中铝浓度对萃取铼的影响,在此基础上进行了^99Tc^m的示踪实验,实验结果表明：甲乙酮对^99Tc^m萃取率达99％。     

Effect of rhenium addition on isothermal oxidation behavior of single-crystal Ni-based superalloy

The isothermal oxidation behavior of a nickel-based superalloy, which we designate as DD32, containing 4 wt.% rhenium and another alloy (DD32M) without rhenium were investigated at 900, 1000 and 1100 °C. Oxidized alloys were characterized by SEM, EDX, EPMA and XRD. The two alloys revealed similar oxidation rates at 900 °C, while the DD32 alloy showed a slightly higher mass gain than that of the DD32M alloy during 1000 and 1100 °C exposure. Surface and cross-sectional examination indicated that DD32 alloy showed nonuniform oxidation between dendritic and interdendritic areas at all temperatures. Similar different oxidation behavior between dendritic and interdendritic regions was also observed in the DD32M alloy at 900 °C. However, DD32M showed relatively uniform oxidation at 1000 and 1100 °C exposure. Therefore, Re addition clearly induced the nonuniform oxidation of the alloy.     

铼(Ⅶ)催化烯丙醇移位/去对称化串联反应

使用Re_2O_7和手性磷酸为共催化剂,实现了催化不对称的环己二烯酮烯丙醇移位/氧杂-Michael加成串联反应。通过这一反应,可以一步构建带有三个手性中心的环己烯酮骨架结构,为合成带有这一类骨架的天然产物和药物分子提供了高效的合成方法。同时,通过分析条件的优化,找到了合适的手性拆分条件,为光学活性环己烯酮化合物提供了分析方法。     

Influence of preparation method on the catalytic performances of Re2O7/SiO2-Al2O3 catalysts in the metathesis of ethylene and 2-pentene

The metathesis of ethylene and 2-pentene for propylene production was investigated over Re₂O₇/SiO₂-Al₂O₃ catalysts. The SiO₂-Al₂O₃ (50 wt% Al₂O₃) were obtained by co-precipitation, physical mixing, and sol–gel coating. The presence of isolated layers/grains γ-Al₂O₃ either in bulk (physical mixing) or on the surface (sol–gel coating) resulted in isomerization-free metathesis. On the contrary, the Re₂O₇ catalysts supported on co-precipitated SiO₂-Al₂O₃ or the direct synthesis showed both metathesis and double-bond shift isomerization activities and as a consequence, higher propylene yield was obtained via the secondary metathesis reaction. The catalytic properties were also correlated with the Al-atom rearrangements and the acidic characters/strengths.     

Formation of rhenium diboride via mechanochemical–annealing processing of Re and B

Rhenium diboride (ReB₂) powder was prepared by mechanochemical processing of Re–B powder mixtures with subsequent annealing at temperatures of 600 °C to 1200 °C. Reactive evolution during the synthesis was investigated; furthermore, the effects of the amount of excess B on the reactions that occurred during the synthesis were assessed. The substantial reaction of Re with B occurred at 700 °C to form Re₇B₃ with a small amount of ReB₂. At 800 °C, Re₇B₃ converted into ReB₂; this conversion was enhanced with increasing temperature and increasing amount of excess B. At 1000 °C or above, single-phase ReB₂ powder without trace quantities of Re₇B₃ was obtained for compositions with 15 wt% or greater excess B. The synthesized ReB₂ powder particles were submicrometer with the vast majority being ∼500 nm. In addition, the resulting ReB₂ powders were consolidated by hot pressing or spark plasma sintering to examine the sinterability of the powders.     

川北某黑色页岩型铼矿工艺矿物学研究

通过矿相显微镜、扫描电镜、电子探针、X射线能谱元素面分析等多种手段综合研究了川北某黑色页岩型铼矿中铼的赋存状态。样品为黑色页岩,有机碳含量较高。粘土矿物总量为14.6%,黄铁矿含量16.2%,石英含量37.7%。样品具典型的粘土结构,矿物粒度微细。铼有两种赋存状态,一种呈类质同象形式赋存于黄铁矿内,另一种则以分散形式存在。典型黄铁矿测点Re平均含量为0.024%。黄铁矿是Re的重要载体矿物。建议通过浮选分离黄铁矿,从而实现Re的富集。      

ICP-AES法快速测定铜冶炼废酸中铼、钼、硒含量的研究

采用硝酸处理试样,建立电感耦合等离子体发射光谱法同时测定铜冶炼废酸中铼、钼、硒含量的分析方法。通过实验选择各元素最佳分析谱线,并对基体干扰进行探讨。在选定的实验条件下,方法的检出限为0.6～7.0ng/mL,加标回收率为95.24%~104.83%。该方法应用于三种废酸中三种元素的分析,相对标准偏差为0.26%~4.67%。