Performance evaluation of structural concrete using controlled quality coarse and fine recycled concrete aggregate

This paper presents the fresh, mechanical, and durability performance, of a structural concrete mix classified as C-1, by the Canadian Standards Association (CSA) made with controlled quality Recycled Concrete Aggregate (RCA). Five mixes with water-to-cementing material (w/cm) ratio of 0.40 were produced with various RCA contents and tested against two 0% RCA control mixes made with General Use (GU) cement, and General Use Limestone cement (GUL). The RCA contents in the mixes were 10%, 20%, and 30% by coarse aggregate volume replacement, as well as 10% and 20% fine and coarse (granular) aggregate volume replacement. All evaluated mixes met the specifications from the CSA for fresh, mechanical, and durability properties. The coarse RCA mixes performed better than the granular RCA mixes in terms of flexural and splitting tensile strengths, linear drying shrinkage, water sorptivity, and rapid chloride-ion permeability, where the test results were significantly affected by the ultra fines present in the granular RCA.     

Value chain analysis of bio-coal business in Finland: Perspectives from multiple value chain members

The purpose of this study is to provide a comprehensive outline of the Value Chain (VC)¹ of bio-coal in Finland, define the proper business models of bio-coal business, and investigate the interrelationships between VC activities. The major findings are: 1) the study found significant interrelationships between support and primary activities in the bio-coal VC which suggest that we should not emphasis only the core value/primary activities of the bio-coal business, but pay more attentions to the “side values”/support activities; 2) The study identified political and environmental factors as the effective drivers, while technology and cost-profit uncertainty as major restrictions for the Finnish bio-coal business. The authors would like to suggest that instead of purely “environmental concerns”, the term “sustainability credentials” should be emphasized, which means value creating and adding items should not limit to monetary values, but consider social and environmental value propositions. 3) The study identified “low competition” in the current bio-coal business in Finland, which implies opportunities of market entrance for Finnish and international companies; 4) The study identified that the current Finnish bio-coal model is the decentralized model at the local level. However, the future Finnish bio-coal model will be a large scaled model, with a focus on export sales.     

Research information: Regional architecture as a model towards sustainability

Yoshio Kato discusses the idea of village life as a model for sustainability based on better management of energy and entropy including reduced consumption, recycling and self-sufficiency. A recent house design in Japan by Kato incorporating these ideas is presented, along with questions of lifestyle and consumption that architects, their clients and others will have to consider in the transition toward sustainable design.     

Applications of additive manufacturing (AM) in sustainable energy generation and battle against COVID-19 pandemic: The knowledge evolution of 3D printing

Sustainable and cleaner manufacturing systems have found broad applications in industrial processes, especially aerospace, automotive and power generation. Conventional manufacturing methods are highly unsustainable regarding carbon emissions, energy consumption, material wastage, costly shipment and complex supply management. Besides, during global COVID-19 pandemic, advanced fabrication and management strategies were extremely required to fulfill the shortfall of basic and medical emergency supplies. Three-dimensional printing (3DP) reduces global energy consumption and CO₂ emissions related to industrial manufacturing. Various renewable energy harvesting mechanisms utilizing solar, wind, tidal and human potential have been fabricated through additive manufacturing. 3D printing aided the manufacturing companies in combating the deficiencies of medical healthcare devices for patients and professionals globally. In this regard, 3D printed medical face shields, respiratory masks, personal protective equipment, PLA-based recyclable air filtration masks, additively manufactured ideal tissue models and new information technology (IT) based rapid manufacturing are some significant contributions of 3DP. Furthermore, a bibliometric study of 3D printing research was conducted in CiteSpace. The most influential keywords and latest research frontiers were found and the 3DP knowledge was categorized into 10 diverse research themes. The potential challenges incurred by AM industry during the pandemic were categorized in terms of design, safety, manufacturing, certification and legal issues. Significantly, this study highlights the versatile role of 3DP in battle against COVID-19 pandemic and provides up-to-date research frontiers, leading the readers to focus on the current hurdles encountered by AM industry, henceforth conduct further investigations to enhance 3DP technology.     

Is implementation of continuous improvement possible? An evolutionary model of enablers and inhibitors

The purpose of this article is to present an evolutionary model of the enablers and inhibitors affecting the implementation and sustainability of continuous improvement. With this aim, a qualitative study using the grounded theory was carried out. Interviews were conducted with managers responsible for continuous improvement in first‐tier suppliers in the automotive sector. As a result, two existing lines of research in the continuous improvement literature are synthesized: on one hand, the literature concerning the enablers and barriers associated with continuous improvement sustainability; and on the other, the literature concerning the evolutionary model. © 2011 Wiley Periodicals, Inc.     

Achieving sustainable customer loyalty in airports: The role of waiting time satisfaction and self-service technologies

Waiting time appears to be an unavoidable part of the service industry, particularly at the airport, where you may encounter delays due to check-in, screening, and other activities. This waiting experience can vex customers, affecting their perception of the service provider and, consequently, their loyalty. Our study aimed to determine the effect of waiting time satisfaction and the use of self-service technology on the long-term sustainability of customer loyalty. 750 structured questionnaires were distributed to travelers at two international airports in Turkey. PLS-SEM was used to analyses the models. Our findings indicate that customer satisfaction with waiting times and the use of self-service technologies are critical for the long-term sustainability of customer loyalty. Additionally, we discovered that waiting time satisfaction partially mediates the relationship between self-service technology use and long-term customer loyalty. Finally, the managerial implications were discussed, including future research suggestions.     

Stakeholder orientated sustainable land management: The Ruhr Area as a role model for urban areas

The concept of sustainable land management (SLM) can help create a balance between the different demands of economy, society and nature. SLM means to actively develop land based on a knowledge-based procedure. It should aim on long term enhancements. The basis of SLM is the interests and the goals of the stakeholders. It is the result of a bargaining process between different institutions by creating win-win-situations or adequate conflict solutions to reach a consensus. The Ruhr Area is Germany’s biggest metropolitan area. Land management regarding economic, social and environmental issues, which has a long tradition in this area, goes back to 1920. Being the centre of the heavy industry in Germany for more than 150 years, the Ruhr Area today is a green metropolis. The ecological, social and economical change of this industrial region can serve as a role model for SLM in urban areas all over the world.     

Editorial

Abstract

Defining and measuring sustainability is a major challenge. This article argues these limitations need not stop us from trying to identify and value the possible impacts of what we are doing, or are thinking about doing, over time periods much longer than the lives of our investments, or even of the lives of those of us living today. Sustainability is a relative concept that must be applied in an environment undergoing multiple changes, changes that are occurring over different temporal and spatial scales. We depend on our water resource systems for our survival and welfare. Yet no one expects them to be restored to, or survive in, their most productive pristine states in the face of increasing development pressures for land in their watersheds and for water in their streams, rivers, lakes, and aquifers. A continuing task of water resource planners and managers is to identify the multiple impacts and tradeoffs resulting from what we who are living today may wish to do for ourselves and our immediate children and what we can only guess our yet-to-be-born descendants may wish us to do, or not do, for them in some distant future. This task must involve professionals from other disciplines in a context much broader than just water management. Once these impacts and tradeoffs are identified, it is then up to the political process to make choices when they are in conflict. All of us need to be a part of this decision-making process.     

Sustainability assessment of dwellings – a comparison of methodologies

Building sustainability assessment tools (BSATs) aim to promote and rank the sustainability of building stock. This paper makes a deep comparative analysis on how dwellings are evaluated by five BSAT and one performance-based design tool. The comparison is based on: (i) the purpose of assessment; (ii) sustainability dimensions considered; (iii) indicators addressed; (iv) life cycle phases considered by the indicators; (v) type of indicators; (vi) measurements; (vii) aggregation processes; and (vii) life cycle phases during which the assessment was carried out. The evaluation showed that the scope of BSAT varies significantly as well as the life cycle phases addressed in the assessment. Financial issues are often excluded from the assessment. None of the schemes is totally quantitative or qualitative in their measurement system; all have different types of indicators and different ways to assess them. This research provides researchers and stakeholders with important inside knowledge on the tools that allow the development and construction of more sustainable buildings.