不同晶相结构ZrO2负载铜基催化剂用于二乙醇胺脱氢反应

通过制备不同晶相结构〔单斜相(m-ZrO_2)、四方相(t-ZrO_2)和无定型(a-ZrO_2)〕ZrO_2载体,再通过沉积沉淀法制得Cu/m-ZrO_2、Cu/t-ZrO_2和Cu/a-ZrO_2催化剂,分别用于催化二乙醇胺脱氢合成亚氨基二乙酸反应。采用XRD、氮气物理吸附脱附、XPS、H_2-TPR、CO_2-TPD对催化剂的结构进行了表征。结果表明,Cu/m-ZrO_2催化剂界面更加有利于Cu~+/Cu~0稳定存在,具有更多的碱性位点,且抗氧化性较好。在二乙醇胺脱氢反应中,Cu/m-ZrO_2催化剂性能最好,反应时间为2.5 h,亚氨基二乙酸收率为97.64%。     

Simultaneous accommodation of Dy3+ at the lattice site of β-Ca3(PO4)2 and t-ZrO2 mixtures: Structural stability,mechanical, optical,and magnetic features

Structurally stable β-Ca₃(PO₄)₂/t-ZrO₂ composite mixtures with the aid of Dy³⁺ stabilizer were accomplished at 1500°C. The precursors comprising Ca²⁺, P⁵⁺, Zr⁴⁺, and Dy³⁺ have been varied to obtain five different combinations. The results revealed the fact that complete phase transformation of calcium-deficient apatite to β-Ca₃(PO₄)₂ occurred only at 1300°C, whereas the evidence of t-ZrO₂ crystallization is obvious at 900°C. The dual occupancy of Dy³⁺ at β-Ca₃(PO₄)₂ and t-ZrO₂ structures was evident; however, Dy³⁺ initially prefers to occupy β-Ca₃(PO₄)₂ lattice until its saturation limit and thereafter accommodates at the lattice site of ZrO₂. The typical absorption and emission behavior of Dy³⁺ were noticed in all the systems and, moreover, the surrounding symmetry of Dy³⁺ domains has been determined from the luminescence study. All the systems ensured paramagnetic response that is generally contributed by the presence of Dy³⁺. A gradual increment in the phase content of t-ZrO₂ in the composite mixtures ensured a significant improvement in the hardness and Young's modulus of the investigated compositions.     

Pressureless sintering and characterization of cordierite/ZrO2 composites

Cordierite/ZrO₂ composites with 5 to 25 wt% ZrO₂ were fabricated by conventional powder mixing and pressureless sintering method. Their densification behavior, microstructure, mechanical and thermal properties were studied. By dispersing 25 wt% (9.57 vol%) ZrO₂, densified cordierite/ZrO₂ composite with a relative density of 98.5% was obtained at an optimum sintering condition of 1440 °C and 2 h. ZrO₂ particles were homogenously dispersed within matrix grains and at the grain boundaries. The intragranular particles were finer than 100 nm and the intergranular particles were coarser. Both fracture strength and toughness could be enhanced more than two times higher, compare to those of monolithic cordierite, by dispersing 25 wt% ZrO₂ into the cordierite matrix. The toughening mechanism in the present composites was mainly attributed to martensitic transformation due to ZrO₂ dispersion. Electronic Publication     

撞击流管式反应制备超细氧化锆粉体

我国氧化锆粉体产业目前基本上“精进粗出”，迫切需要开发氧化锆粉体备新工艺，特别是具有高附加值的纳米氧化锆粉体制备技术，液相反应沉淀法具有成本低，易于工业化等优点而成为研究的热点。本文采用撞击流管式反应新工艺，撞击流接触反应强化了过程的微观混合。实现了均匀成核，使得成核过程易于控制，而管式反应器的独特设计克服了返混，因而使得反应沉淀过程易于控制，粒子分布窄。用该工艺结合醇热处理表面改性制备的超细氧化锆粉体。平均粒径约为14nm，粒度分布窄并无硬团聚发生。该方法过程简单，易于工业化大生产。     

Cu/ZrO2催化剂的研究进展及其应用

综述了催化剂Cu／ZrO2的制备方法及其在CO／H2、CO2／H2合成甲醇、NOx的分解、醇胺脱氢合成氨基酸、CO的氧化及CO＋NO反应等方面的应用。     

加热炉烟气在线自动测氧技术的研究

介绍了武钢热轧厂烟气中残氧量自动监测技术及燃烧工艺试验 ,评述该项技术研究动态 ,指出它对节能降耗和环境保护的作用     

Aqueous tape casting of yttria stabilized zirconia

Tape casting process was used to produce yttria stabilized zirconia (YSZ) substrates in an aqueous system with poly(vinylalcohol) (PVA) and glycerine as binder and plasticizer, respectively. Various compositions of YSZ slips with different amounts of PVA and glycerine and consequently different solid/liquid ratios were prepared. The influence of the slip composition on the rheological properties of the slips was studied. In addition, the effect of the slip composition on the properties of the green and sintered tapes was investigated. PVA and glycerine did not affect the dispersion properties of the YSZ powder. Glycerine additions enhanced the flexibility of the green tapes but also produced a decrease in the tensile strength. The increase in the PVA content increased the tensile strength but resulted in a markedly decrease in the green density of the tapes. A correlation between the green and sintered density was found. The anisotropic sintering shrinkage parallel and perpendicular to the casting direction increased with increasing the PVA content. The slip compositions with 5 wt% PVA produced green tapes with satisfactory tensile strength. They had the highest sintered density, the lower sintering shrinkage and the lesser shrinkage anisotropy.     

ZrO_2与40Cr钢钎焊中的缓冲层

本试验研究了ＺｒＯ２与４０Ｃｒ钢在加入缓冲层前后的钎焊连接，结果表明：插入缓冲层Ｃｕ和Ｔｉ可以提高接头强度。对每一种缓冲层，存在一最佳厚度，对应的钎焊强度最大。此最佳厚度对Ｃｕ为０．４ｍｍ左右，对Ｔｉ为１ｍｍ左右。作者认为这是由缓冲层的力学性能和热膨胀系数对残余应力释放产生的两种相反影响而造成的。钎焊时，缓冲层Ｃｕ和Ｔｉ向钎料中均有程度不同的溶解，但不影响钎料对ＺｒＯ２的浸润和反应结合。ＺｒＯ２－４０Ｃｒ钢连接的所有接头均断在陶瓷的近缝区，其断裂方式有三种。     

ZrO2制备方法研究进展

以ZrO₂为活性组分或载体的催化剂,在酚类定向催化转化中具有较高的研究价值。总结了ZrO₂的各种制备方法,包括溶胶-凝胶法、共沉淀法、水热法、表面活性剂辅助法、静电纺丝法、热解法、多元醇还原法、反相微乳法和超临界合成法等。阐述了各种方法的反应原理,详细比较了不同制备方法的优劣,并具体分析了制备方法对催化剂结构及性能的影响。     

微波诱导稀土复合固体超强酸SO4^2-／ZrO2-Nd2O3催化合成乙酸苄酯

以新型稀土复合固体超强酸为催化剂，在微波辐射下苯甲醇和乙酸反应合成了乙酸苄酯，探索反应各因素对酯化率的影响。实验结果表明：SO4^2-／ZrO2-Nd2O3具有较高的催化活性。最佳反应条件为：醇酸摩尔比2．0（乙酸用量为0．2mol前提下），催化剂用量为1．8g，带水剂环己烷12mL，微波辐射功率550W，辐射时间25min，酯化率可达96．3％。该催化剂易于回收且可重复使用，具有良好的活性稳定性。