Separation of hematite from banded hematite jasper (BHJ) by magnetic coating

The separation of iron oxide from banded hematite jasper(BHJ) assaying 47.8% Fe, 25.6% Si O2 and 2.30%Al2O3 using selective magnetic coating was studied. Characterization studies of the low grade ore indicate that besides hematite and goethite,jasper, a microcrystalline form of quartzite, is the major impurity associated with this ore. Beneficiation by conventional magnetic separation technique could yield a magnetic concentrate containing 60.8% Fe with 51% Fe recovery. In order to enhance the recovery of the iron oxide minerals, fine magnetite, colloidal magnetite and oleate colloidal magnetite were used as the coating material. When subjected to magnetic separation, the coated ore produces an iron concentrate containing 60.2% Fe with an enhanced recovery of56%. The AFM studies indicate that the coagulation of hematite particles with the oleate colloidal magnetite facilitates the higher recovery of iron particles from the low grade BHJ iron ore under appropriate conditions.     

Preparation and Kinetic Considerations for the Dissolution of Cr‐substituted Iron Oxides in Reductive‐complexing Formulations

The dissolution rate coefficients of Cr‐substituted (0‐20 at.% Cr) iron oxides viz. hematite and magnetite were determined by using an inverse cubic rate (ICR) law applicable for spherical particles as well as by a general kinetic equation (GKE) applicable for polydispersed particles. An attempt is made to compare both the treatments for different kinds of dissolution profiles obtained by employing oxides with narrow particle size distribution in V(II)‐EDTA and citric acid‐EDTA‐ascorbic acid formulations at 353±5K. The dissolution profiles could be classified into three types based on the nature of oxide and formulations. It is observed that both ICR and GKE treat the dissolution course as a function of decrease in fraction of undissolved mass, m/m₀. The dissolution rate coefficients determined by ICR and GKE have shown the similar trend of decrease with increasing Cr content of the oxides and was ascribed to lattice stabilization.     

广西某赤褐铁矿选矿试验研究

对广西某含铁品位为52．07％、磁性率（FeO／TFe）为2．11％的难选赤褐铁矿矿石进行理化性能分析和矿物工艺学研究,并进行了强磁选、还原焙烧－磁选选矿试验,确定还原焙烧磁选可以获得较好的选别指标为：精矿铁品位达63．27％,产率达82．7％,铁回收率95．99％,有害元素硫,磷都较低,Si02、Al2O3、CaO、MgO的含量都能满足高炉冶炼的要求,属于优质铁精矿．     

Two-step flotation recovery of iron concentrate from Donganshan carbonaceous iron ore

The flotation of pure and natural carbonaceous iron ore samples in the oleate flotation system was investigated. Starch can depress hematite effectively in a wide pH range, but cannot depress siderite efficiently in neutral conditions. The flotation recovery of pure hematite, siderite, and quartz in the oleate-starch-CaCl₂ system is significantly different when the slurry pH varies from 4 to 12. A novel two-step flotation process was developed for the separation of iron concentrate from Donganshan carbonaceous iron ore through which the siderite concentrate is first recovered and the high quality hematite concentrates with relative high iron recovery can be obtained in the second step flotation. The siderite concentrate may be utilized directly or undergo further concentration steps to increase iron grade.     

固/液界面上腐殖酸吸附机理的探讨

运用SS表面络合模型研究了腐殖酸分子在赤铁矿颗粒/水界面上的吸附情况。主要研究了pH值和离子强度2个重要影响因素,通过分析反应前后溶液的ζ电势和赤铁矿颗粒表面的吸附量,从而得出赤铁矿颗粒/水界面吸附配位反应的程度和腐殖酸分子的吸附机理。     

FLOTATION MECHANISM OF FLUORITE AND HEMATITE WITH SODIUM NAPHTHENE SULFONATE

ＦＬＯＴＡＴＩＯＮＭＥＣＨＡＮＩＳＭＯＦＦＬＵＯＲＩＴＥＡＮＤＨＥＭＡＴＩＴＥＷＩＴＨＳＯＤＩＵＭＮＡＰＨＴＨＥＮＥＳＵＬＦＯＮＡＴＥ￥Ｇｅ，Ｙｉｎｇｙｏｎｇ；Ｑｕｅ，Ｘｕａｎｌａｎ（ＣｈａｎｇｓｈａＲｅｓｅａｒｃｈＩｎｓｔｉｔｕｔｅｏｆＭｉｎｉｎｇ...     

Retracted: Dual Effects of Nanostructuring and Oxygen Vacancy on Photoelectrochemical Water Oxidation Activity of Superstructured and Defective Hematite Nanorods

An Ar atmospheric treatment is rationally used to etch and activate hematite nanoflakes (NFs) as photoanodes toward enhanced photoelectrochemical water oxidation. The formation of a highly ordered hematite nanorods (NRs) array containing a high density of oxygen vacancy is successfully prepared through in situ reduction of NFs in Ar atmosphere. Furthermore, a hematite (104) plane and an iron suboxide layer at the absorber/back‐contact interface are formed. The material defects produced by a thermal oxidation method can be critical for the morphology transformation from 2D NFs to 1D NRs. The resulting hematite NR photoanodes show high efficiency toward solar water splitting with improved light harvesting capabilities, leading to an enhanced photoresponse due to the artificially formed oxygen vacancies.     

马钢球团配用巴西PF精矿的工业试验及生产

介绍了马钢一烧竖炉配用巴西PF精矿生产球团的效果。工业试验及生产实践表明，配用20％～30％PF精矿后，不但可以降低球团矿原料成本，解决球团原料紧张的难题，而且球团矿冶金性能完全满足高炉冶炼需要。     

A Study of the Effect of Aluminium on the Mechanochemical Reduction of Hematite by Graphite

The effect of addition of small amounts of aluminium on mechano‐chemical reduction of hematite by graphite was studied. Various amounts of aluminium (0 to 10%) were added to a hematite‐graphite mixture, in which C/O ratio was 1:1. The hematite‐graphite‐aluminium mixtures were then subjected to ball milling followed by heating up reduction. The heating up reduction was carried out in Ar atmosphere, using TG‐DTA device. In TG‐DTA experiments, samples were heated by a constant heating rate of 10 °C/min from room temperature up to 1100 °C and maintained for 30 minutes at this temperature. To clarify the reactions which took place during milling and heating up reduction, the samples were subjected to XRD examinations. It was found that the heat generated during exothermic reaction of aluminothermic reduction of hematite promoted the endothermic reaction of carbothermic reduction. In the course of heating up reduction, the carbothermic reaction occurred just after aluminothermic reaction. Increasing of aluminum content from 0 to 10% in 2 hours ball milled samples decreased the temperature of carbothermic reaction from 1020 °C to about 860 °C. The further ball milling of the samples up to 5 and 10 hours, for the samples containing 10 and 5% aluminium respectively, caused the decrease of the temperature of aluminothermic and carbothermic reactions to around the melting point of aluminium.     

Augmented photoelectrochemical response of CdS/ZnS quantum dots sensitized hematite photoelectrode

A visible light active and stable photoelectrode has been developed by depositing a passivating layer of ZnS QDs on CdS QDs sensitized hematite photoelectrode (Hematite‐CdS/ZnS) for PEC generation of hydrogen. Photoelectrochemical properties, in terms of stability and efficiency, have been investigated on the various hematite photoelectrodes sensitized with CdS QDs and CdS/ZnS QDs by varying number of SILAR cycles. I–V characteristics show that two layers of ZnS QDs deposited over three layers of CdS could enhance PEC response of hematite and efficiency by a factor of 3 and 11 respectively. Chronoamperometry measurement ensures that after adding a layer of ZnS QDs, CdS sensitized hematite film turns out to be a stable photoelectrode in the electrolyte. Prepared photoelectrodes have been characterized by XRD, SEM, HRTEM and UV–Vis spectrophotometer for various structural, morphological and optical properties to analyze PEC results. Mott–Schottky analysis and incident photon to current conversion efficiency (IPCE) measurements of sensitized hematite photoelectrode supported the improved PEC response of CdS/ZnS QDs sensitized hematite thin films. Copyright © 2016 John Wiley & Sons, Ltd.