Lithiation MXene Derivative Skeletons for Wide-Temperature Lithium Metal Anodes

Lithium (Li) metal, as an appealing candidate for the next-generation of high-energy-density batteries, is plagued by its safety issue mainly caused by uncontrolled dendrite growth and infinite volume expansion. Developing new materials that can improve the performance of Li-metal anode is one of the urgent tasks. Herein, a new MXene derivative containing pure rutile TiO₂ and N-doped carbon prepared by heat-treating MXene under a mixing gas, exhibiting high chemical activity in molten Li, is reported. The lithiation MXene derivative with a hybrid of LiTiO₂-Li₃N-C and Li offers outstanding electrochemical properties. The symmetrical cell assembling lithiation MXene derivative hybrid anode exhibits an ultra-long cycle lifespan of 2000 h with an overpotential of ≈30 mV at 1 mA cm⁻², which overwhelms Li-based anodes reported so far. Additionally, long-term operations of 34, 350, and 500 h at 10 mA cm⁻² can be achieved in symmetrical cells at temperatures of −10, 25, and 50 °C, respectively. Both experimental tests and density functional theory calculations confirm that the LiTiO₂-Li₃N-C skeleton serves as a promising host for Li infusion by alleviating volume variation. Simultaneously, the superlithiophilic interphase of Li₃N guides Li deposition along the LiTiO₂-Li₃N-C skeleton to avoid dendrite growth.     

Laboratory study of property-modified prebaked carbon anode and application in large aluminum electrolysis cells

A kind of complex additive mainly containing Al, Mg, F, and O was prepared. The synthetical performances of the property-modified prebaked anodes containing additives were tested in laboratory. On the basis of ideal testing results obtained, a large number of industrial prebaked property-modified anodes are prepared in a large-scale aluminum company. Further more, they are all used in 160 kA prebaked anode aluminum electrolysis cells. The statistic result show that, compared with common anodes, the property-modified ones enhance current by 11.6 kg per ton aluminum averagely.     

Planning the GMAW process by constraint propagation

Although the gas metal arc welding (GMAW) process is widely used for joining metals, its planning is still a cumbersome task. The planning procedure involves many complex interrelationships among the process variables and depends heavily on empirical knowledge. Therefore, a solution method that allows a convenient way to represent the domain knowledge and evaluate the process variable relationships is needed. Further, the lack of a strong domain theory to quantify these interrelationships is a deficiency in the planning of the GMAW process. This paper presents a solution method that overcomes this deficiency and introduces a convenient knowledge representation scheme. The solution method considers the planning procedure to be a constraint satisfaction problem (CSP). The AC-4 algorithm is used to obtain arc consistency among nodes in the constraint network and the PC-4 algorithm is applied to obtain path consistency in the network. A modified version of the AC-4 algorithm is developed to reduce the search space and correspondingly reduce the computation time. An example is presented to demonstrate the capability of the method and its potential to reduce lead time.     

Microstructural changes accompanying repair welding in 5xxx aluminium alloys and their effect on the mechanical properties

At the shipyards, the aluminium alloy 5083 is welded with a multi-pass sequence using the metal inert gas technique. If, while checking the weld integrity either after welding or during service, defects are detected in the vicinity of the weldment, repairs are usually employed to extend the service life.

The repair method involves removal of the upper passes, depending on the thickness and re-welding under the same conditions.

Purpose of this paper is to examine the microstructural changes accompanying repair welding, define their effect on properties of primary importance and set, if possible, an upper limit as far as the number of repairs is concerned.     

一种二维梯度电极模型的表面热应力缓和设计

针对一种侧面和一端的成分呈梯度变化的圆柱体电极模型进行了热应力缓和优化设计。模型材料成分是金属Cu和NiFe2O4尖晶石陶瓷。采用混合律定律确定材料组分．性质关系，利用ansys有限元分析软件计算了从300K(零应力状态)升温到1300K时模型表面的热应力，分析了层数n、成分指数p以及锥角θ对模型表面热应力分布的影响。结果表明：层数n主要影响应力曲线的光滑程度，层数增加，曲线变得平滑；成分指数p是热应力缓和设计的关键，指数越小，应力越小；锥角θ的增加也可缓和热应力，但作用不如成分指数。     

水轮机电液调速器人工失灵区的分析计算

本文对电液调速器的人工失灵区电路进行定量分析，导出了失灵区的一套计算公式，并指出失灵区与调差率、功率偏差的内在关系。     

Structural and surface properties of thermally prepared Ti/RhxTi(1−x)Oy electrodes: I—influence of preparation parameters

Electrodes of Rh_xTi_(1−x)O_y nominal composition were prepared by thermal decomposition of the chloride or nitrate precursor salts dissolved in strongly acidic medium and applied by brush to both sides of a Ti° support. A systematic study of the influence of calcination temperature and time as well as oxygen flux was conducted. The coatings were characterised by SEM, EDAX, XRD, open circuit potential measurements and cyclic voltammetry (CV). Visible-ultraviolet spectrophotometry was employed to identify the chemical form of the precursor in solution while thermogravimetric analysis (TGA) was used to assess the decomposition temperature ranges. Optimisation of the coating preparation parameters showed coatings obtained from [Rh(H₂O)₆](NO₃)₃ precursor dissolved in HNO₃ 1:2 (v/v) and fired at 430 °C for 2 h in a 5 l min⁻¹ oxygen stream-furnished stable electrodes having the highest electrochemically active surface area.     

高温合金材料在铝电解工业中的应用探讨

对高温合金在铝电解工业用作惰性金属阳极材料的选择进行阐述，并就实际应用过程中的抗氧化耐腐蚀性进行探讨；阐述适用于铝电解工业的惰性阳极合金所应具备的必要条件和必须解决的问题，并介绍目前有关的研究动态和研究方向。     

Effect of electrolysis superheat degree on anticorrosion performance of 5 Cu/（10NiO-NiFe2O4） cermet inert anode

5Cu/(10NiO-NiFe2O4) cermet inert anodes were prepared by cold-pressing and sintering process, and the effect of superheat degree of melting K3AlF6-Na3AlF6-AlF3 on their anticorrosion performance was studied under electrolysis conditions. The results show that, the fluctuation of cell becomes small with increasing of superheat degree, which is helpful to inhibit the formation of cathodic encrustation; the concentration of impurities from inert anode in bath goes up to certain degree, but it is far smaller than those in traditional high-temperature bath. Increasing the superheat degree of melting K3AlF6-Na3AlF6-AlF3 has unconspicuous effect on the contents of impurities in cathodic aluminum. The total mass fractions of Fe, Ni and Cu in aluminum are 15.38% and 15.09% respectively under superheat degree of 95 and 195 ℃. From micro-topography of anode used view, increasing the superheat degree can aggravate corrosion of metal Cu in inert anode, and has negative influence on electrical conductivity of electrode to some extent.