Deformation-Strength Relationships in Short-Term Tension of Heat-Resistant Materials

The analysis of 124 curves obtained in short-term tensile tests demonstrate that they can be described by varying strain hardening and softening characteristics. Different stress–strain curves can be produced at invariable yield strength and ultimate strength and interrelated proportional variations of the above characteristics. To determine some specific stress–strain curve, it is necessary to take account of yield strength and ultimate strength as well as strain corresponding to the latter. The relations between yield strength, ultimate strength and hardening and their practically complete absence between these parameters and softening were statistically established.     

A One-Dimensional Nonlocal Damage-Plasticity Model for Ductile Materials

This paper presents a new 1-D non-local damage-plasticity deformation model for ductile materials. It uses the thermodynamic framework described in Houlsby and Puzrin (2000) and holds, nevertheless, some similarities with Lemaitre’s (1971) approach. A 1D finite element (FE) model of a bar fixed at one end and loaded in tension at the other end is introduced. This simple model demonstrates how the approach can be implemented within the finite element framework, and that it is capable of capturing both the pre-peak hardening and post-peak softening (generally responsible for models instability) due to damage-induced stiffness and strength reduction characteristic of ductile materials. It is also shown that the approach has further advantages of achieving some degree of mesh independence, and of being able to capture deformation size effects. Finally, it is illustrated how the model permits the calculation of essential work of rupture (EWR), i.e. the specific energy per unit cross-sectional area that is needed to cause tensile failure of a specimen.     

烧结处理小矿山精矿的应用研究

研究小矿山精矿的性质，分析小矿山精矿对烧结过程的影响，提出了增加小矿山精矿配入量的途径及方法．     

Polymer-Modified Bitumen Using Ethylene Terpolymers

Polymer modified bitumen (PMB) is used in various construction applications, especially in motorways. The aim of this study is to improve features of 60/70 penetration grade, modified bitumen used on highways. Increasing the sensitivity to temperature and oxidation resistance are very important points for the modified bitumen. This condition was provided by reacting the carboxylic acid groups in asphaltene with the reactive ethylene terpolymer to form ester. Reactive ethylene terpolymer (RETP) and ethylene terpolymer (ETP) manufactured by DuPont USA were used as additives in this study. Infrared Spectrophotometer (IR) graphics and optical pictures of the modified bitumen have been examined. It has been observed that the softening point has increased on the other hand, the penetration and ductility values have decreased according to the test results.     

新型缆用热熔胶的研制

分析了通信线缆用 YH- 4热熔胶组成原料的性能和作用 ,找出影响耐环境高温性能的主要原因 ,并对新研制出的耐环境高温性能 YH- 5热熔胶作了一些分析和探讨 .     

高压注水在综放工作面的应用

介绍了综采煤层注水软化工艺的原理 ,钻孔布置方法以及生产实际中的应用情况     

含损伤软化材料层合板承压时的分叉分析

本文讨论了由纤维和树脂-损伤应变软化材料组成的层合板在面内受压时的压缩分叉。用有限变开理论和半解析有限元法建立了相应的分叉方程,并进行数值模拟。计算结果表明,分叉将在损伤材料的应变软化阶段发生,为剪切带形分叉,损伤材料骨有剪应变集中,而且在纤维和树脂的界面附近有较大的剪应变突变等现象。     

Stability Criteria of Underground Workings under Zonal Disintegration of Rocks

Using the energy approach as the base, the criteria are developed for brittle rock failure in outcropping in the workings driven in the rock masses of different degree of disturbance. A method is presented for estimating the stability of workings under conditions of zonal disintegration.     

Optimizing Thermal Process for Canned White Beans in Water Cascading Retorts

Based on thermal degradation kinetics and heat transfer expressed as the Ball formula method, a simplified approach was used to optimize sterilization processes for thermal softening of white beans (Phaseolus vulgaris, subsp. nanus Metz., variety Manteca de Leon) Constant retort profiles in a still and end-over-end rotary water cascading retort (Barriquand Steriflow) were used. Quality attributes of beans processed at the optimum were evaluated by a trained taste panel and by a tenderometer. Both approaches could distinguish (P<0.01) between attributes of products from optimal rotary and still processes. End-over-end rotation resulted in faster heat penetration and better quality retention of beans. Texture of white beans processed at 4° or 8°C from the optimal temperature could be distinguished (P<0.01) by the sensory panel and by the tenderometer.     

纳滤膜技术及其应用的研究进展

随着膜技术的发展,20世纪80年代出现的纳滤膜弥补了反渗透与超滤之间的空白。纳滤膜(nanofiltration membrane,NF)又称“疏松型”反渗透膜。通常情况下,膜的截留相对分子质量界限为200~1 000。与截留相对分子质量相对应的膜孔径为1~3 nm,故将这类膜称为纳滤膜。纳滤膜可以截留糖类等低相对分子质量有机物和高价无机盐(MgSO4等),但对单价无机盐的截留率低(仅为10%~80%),具有相当大的透过能力。由于单价盐可以自由透过纳滤膜,使得膜两侧因离子浓度不同而造成的渗透压差远远低于反渗透膜。在相同通量条件下,纳滤膜所要求的驱动压力比反渗透膜要低得多。一般纳滤的操作压力为0.5~1.5 MPa。由于纳滤膜的这种独特分离性能,确定了它在水软化和低相对分子质量有机物纯化浓缩的地位。此外,纳滤膜能有效去除许多中等相对分子质量溶质,如消毒副产物的前驱物、残留农药和某些色素等,因而在水净化处理和脱色中得到广泛应用。