Cholesterol‐imprinted polymer receptor prepared by a hybrid imprinting method

A novel cholesterol‐imprinted polymer (CMIP‐H) was prepared by a hybrid method of covalent imprinting and non‐covalent imprinting. This approach involves the copolymerization of a template‐containing monomer, cholesteryl 2‐hydroxyethyl methacrylate carbonate, and a cross‐linker, followed by hydrolysis to afford a flexible guest‐binding site accompanied with the easy and efficient removal of a ‘sacrificial spacer’. The effect of solvent on the binding capacity of CMIP‐H towards cholesterol was studied, indicating that a good binding capacity towards cholesterol could be achieved in a less‐polar solvent. The binding experiments of CMIP‐H towards a series of structural analogues of cholesterol, including cholesterol acetate, progesterone and stigmasterol, were carried out in hexane. The results showed that CMIP‐H almost did not bind cholesterol acetate at all because the hydrogen‐bonding site is blocked. It exhibited a similar binding towards both cholesterol and stigmasterol, but much higher binding towards progesterone. Copyright © 2005 Society of Chemical Industry     

铁路站段用交流不间断电源供电系统

结合铁路站段的特点 ,介绍了一种交流不间断电源供电系统 ,能够很好的解决其供电问题。     

DG抗高温隔离液在古深1井的应用

古深1井是大庆油田在古龙地区的一口风险探井,设计井深5 500 m,实际完钻井深为4 739 m。钻进过程中,多次出现塌、漏、卡等事故,造成井径不规则。为平衡压力,压稳地层,更好地隔离钻井液和水泥浆,提高顶替效率,设计采用DG抗高温隔离液。DG抗高温隔离液抗高温可达150℃,密度调节范围宽,抗高温悬浮稳定性好,失水量少,与水泥浆和钻井液相容性好。古深1井采用双级注水泥工艺,固井施工过程十分顺利,隔离液密度均匀,泵送容易,无发泡现象。从声幅测井情况来看,水泥面上部与隔离液交界处界面清楚,水泥环胶结良好,水泥返高达到了设计要求,混浆过渡段短,固井质量合格。     

Effect of intensified discharge in the vicinity of ribs on PDP performance

It was determined that the discharge in the vicinity of ribs should be intensified to obtain low‐voltage, high‐luminous efficacy, and high module efficiency. One possible way is to increase the space between ribs and the discharge surface. Even if the amount of space increases by only 2 or 3 µm, it still results in low discharge voltage, large discharge current, and high luminous efficacy. For that reason it might be important to control the micron‐sized particles included in the MgO crystal dispersed layers. Another preferable way is to use ribs with a low electric permittivity (ε) that are represented by porous ribs. Moreover, low‐ε ribs diffuses the high‐energy spots in plasma, resulting in a high luminous efficacy. They feature a significantly lower sustain voltage and a smaller parasitic capacitance as well to facilitate a help high module efficiency. Also, highly porous ribs are expected to increase their practical use in aspects of mechanical strength and impurity gas exhaustion.     

采用有限元分析法量化不同中空玻璃边缘密封的热位移

间隔条和玻璃板片之间的相对热位移是中空玻璃边缘密封乃至中空玻璃(IGU)本身老化的主要原因之一.作者采用有限元分析法(FEA),建立了发生在大尺寸(1.5 m×2.1 m)的中空玻璃边缘密封的热位移与温差变化之间的模型,这是三种商业化的、不同材质的、不同设计的间隔条,在温度变化为-30～ 60℃范围内的模型.此模型是基于铝间隔条和镀锌钢间隔条与尼龙插角的搭配,不锈钢间隔条和弯曲插角的搭配.尼龙插角假定为实心的并稳固地固定于间隔条上;弯曲插角被建模成实心弯曲的金属插角,并同样稳固地固定于间隔条上.由于实际的弯曲插角是空心的,模型可能高估了这种转角设计的应力.正如预期那样,在低温时,插角会被向内拉,导致弯曲角度大于90°;在高温下,插角会被向外推,导致弯曲角度小于90°.通过检测发生在中空玻璃周边第一道密封的聚异丁烯密封胶厚度的变化,作者发现,到目前为止,不锈钢间隔条对于截面积的变化影响最小;铝制间隔条的影响最大.这个发现与基于间隔条材料与浮法玻璃之间热膨胀系数差异而预期的性能一致.因此,热位移引起的第一道密封的有效扩散横截面变化,可以解释为何具有不同间隔条材料的中空玻璃之间的性能差异.     

确定垫片设计系数的简化方法及应用

基于螺栓法兰连接系统的载荷变形关系分析提出了确定垫片设计系数的简化方法,以不锈钢缠绕柔性石墨垫片实验结果计算绘制的ｙ ｐ图设计法兰,算例表明,按文中方法较现行规范更为合理和经济。     

稍不均匀电场中绝缘子附近导电微粒受力分析

建立稍不均匀电场中绝缘子附近的自由导电微粒所受作用力的2-D计算模型,通过对微粒表面Maxwell应力张量进行计算,得到微粒在电场中所受的静电力。改变电极倾斜角、绝缘子材料以及绝缘子的外形,对影响自由导电微粒运动的因素进行了分析,结果显示通过减小高压电极倾斜角度,减小绝缘子材料的介电常数,并采取合适的绝缘子外形, 可减小微粒受到的向上的静电力和微粒受到的指向绝缘子方向的水平静电力,从而可以减小微粒浮起和附着于绝缘子表面的概率。     

In situ observation of phosphorous and non-phosphorous antiwear films using a mini traction machine with spacer layer image mapping

Since 1940s the principal source of an antiwear additive in crankcase applications has been due to a family of additives known as zinc dialkydithiophosphate (ZDDP). In this study, we have applied a novel technique, the mini traction machine with spacer layer image mapping (MTM SLIM), to study film formation characteristics of monoblend oils containing only basestock and ZDDP and also fully forrmulated oils containing a boron antiwear additive. The purpose of this study was initially to understand the build up of ZDDP film and then to establish whether boron compounds alone could provide significant antiwear films under mixed rolling and sliding contact.     

Coumarin based sensitizers with ortho-halides substituted phenylene spacer for dye sensitized solar cells

The performance of DSSCs (dye sensitized solar cells) with a new series of dyes having different halide groups (i.e. F, Cl and Br) on o-position substituted phenyl spacers with same coumarin donor moieties have been reported. Optical, electrochemical, molecular orbital and photovoltaic properties were studied by varying the halide groups using these dyes. The replacement of halide atoms in same coumarin based dye had a significant effect on the short circuit current density (J_sc), open circuit voltage (V_oc), and photo conversion efficiency (PCE). The J_sc and PCE of dye CD-1 (fluorine substituted) are 10.3 mA/cm² and 5.2% respectively, which is higher than CD-2 (chlorine substituted) and CD-3 (bromine substituted) dyes (having PCE 4.1% and 3.5% respectively) devices. The optimized geometry calculation of o-halide phenyl π-spacer dyes were ascertained by density functional theory (DFT) using the B3LYP/6-31G(d,p) basis set. Moreover, we have checked the effect of various substituents in the same dye structure by DFT analysis.     

冲击位置对三明治型复合板材冲击性能的影响分析

釆用高强低伸工业涤纶为原料,加工织造了机织间隔织物,对间隔织物空间进行泡沫填充,面层与树脂进行复合,制成了三明治型复合材料板材。测试了冲击位置不同时复合板材耐冲击性能和冲击前后板材的侧压性能,分析了冲击位置对三明治型复合板材耐冲击性能的影响。结果表明,相同冲击能量作用下,冲击位置不同时,复合板材的表观破坏和冲击后侧压性能均有差异。在间隔织物规格相同的情况下,冲击位置在接结点处的板材表观冲击损伤大,但冲击发生在接结点处的板材受冲击后,所能承受的侧压载荷相对较大。