DS90C363/DS90CF364 LVDS发送/接收器在数字RGB液晶屏上的应用

通过在FPD铁路上使用LVDS技术可使具有数字RGB接口的液晶显示屏的工作距离大大增加。文章通过一个具体应用环境介绍了21位LVDS发送器/接收器DS90C363/DS90CF364传输套片的主要特性、引脚功能、工作原理，同时指出了在具体设计使用时的注意事项。     

日产NHR-90W型催化剂失活原因分析

对日产NHR -90W催化剂在抚顺石化分公司石油二厂 6万t/a石蜡加氢装置运行情况进行了研究 ,证明该催化剂活性较高 ,对原料的适应性也较强。同时 ,对造成催化剂短期内失活的原因进行了分析 ,认为原料中铁离子含量过高是造成催化剂失活的主要原因。对相关装置生产控制提出了建议     

感应式电能表的智能化改进

介绍了利用AVR单片机AT90S8515的输入捕捉功能对感应式电能表进行智能化改进的方法，讨论了新型防盗电系统的结构原理，给出了用AT90S8515单片机设计带有防盗电功能的感应式电能袁的改进电路组成及工作过程。     

The applicability of the ITS-90 method to platinum resistance thermometers of different purity

The static characteristics of platinum resistance thermometers with different platinum purities were measured. It is shown that in the 0–420°C range the ITS-90 method gives an error of less than 0.01°C, while in the 0–230°C range the error is less than 0.006°C. __________ Translated from Izmeritel’naya Tekhnika, No. 12, pp. 33–36, December, 2006.     

火电仿真技术研究

在电力行业中，计算机仿真一直是不可缺少的工具，它在减少损失、节约经费、提高效率、确保安全经济运行等方面发挥了巨大作用。主要介绍了计算机仿真技术在660MW火电站中的具体应用情况。以邯峰发电厂^#1机为对象，采用STAR-90仿真支撑系统，建立起660MW火电机组1：1仿真机，并在机组投产前建成，取得了良好的培训效果。论述了火电站仿真机未来的发展趋势，包括开发高精度机理性仿真数学模型以及真实的DCS仿真模型、进行性能计算与故障诊断、应用于热工人员培训及机组调试等。     

Effects of the International Temperature Scale of 1990 (ITS-90) on CIE Documentary Standards for Radiometry,Photometry, and Colorimetry

The differences between ITS-90 and IPTS-68 above 1235 K are described. It is shown that none of the following CIE definitions or recommendations require revision because of the introduction of the ITS-90: International Lighting Vocabulary definitions; CIE Standard Illuminants A, D₆₅, other illuminants; and sources for realizing CIE Illuminants. The effect of the ITS-90 on previously calibrated sources for realizing CIE illuminants is negligibly small.²     

Measurement of the heat of fusion of titanium and a titanium alloy (90Ti-6Al-4V) by a microsecond-resolution transient technique

A microsecond-resolution pulse heating technique was used for the measurement of the heat of fusion of titanium and a titanium alloy (90Ti-6Al-4V). The method is based on rapid (50- to 100-s) resistive self-heating of the specimen by a high-current pulse from a capacitor discharge system and measuring, as functions of time, current through the specimen, voltage across the specimen, and radiance of the specimen. Melting of the specimen is manifested by a plateau in the measured radiance. The time integral of the net power absorbed by the specimen during melting yields the heat of fusion. The values obtained for heat of fusion were 272 J · g^–1 (13.0 kJ · mol^–1) for titanium and 286 J · g^–1 for the alloy 90Ti-6Al-4V, with an estimated maximum uncertainty of ±6% in each value.Paper presented at the Second Workshop on Subsecond Thermophysics, September 20–21, 1990, Torino, Italy.