A new analysis of two phase flow on hydrogen production from water electrolysis

It is clear that the entire world have to research, develop, demonstrate and plan for alternative energy systems for shorter term and also longer term. As a clean energy carrier, hydrogen has become increasingly important. It owes its prestige to the increase within the energy costs as a result of the equivocalness in the future availability. Two phase flow and hydrogen gas flow dynamics effect on performance of water electrolysis. Hydrogen bubbles are recognized to influence energy and mass transfer in gas-evolving electrodes. The movement of hydrogen bubbles on the electrodes in alkaline electrolysis is known to affect the reaction efficiency. Within the scope of this research, a physical modeling for the alkaline electrolysis is determined and the studies about the two-phase flow model are carried out for this model. Internal and external forces acting on the resulting bubbles are also determined. In this research, the analytical solution of two-phase flow analysis of hydrogen in the electrolysis is analyzed.     

Development of high pressure membraneless alkaline electrolyzer

A technology for cyclic generation of hydrogen and oxygen using electrodes made of variable valency material that does not need the use of separating ion-exchange membranes is presented. The technological solution enables to fabricate electrolyzers for uninterrupted producing high-pressure hydrogen with reduced energy intensity of the production. The total work for compressing 1 m³ of hydrogen and 0.5 m³ of oxygen has been estimated. Results of investigation of influence of discrete supply of DC current to the electrolysis cell, in order to improve the processes of gas evolution and to simplify the power systems of the electrolysis plant, have been considered. There is also considered an electrolysis installation equipped with a thermosorption compressor in which LaNi₅ is used as a hydride-forming compound. The comparative characteristics of the developed electrolyzer and the currently used hydrogen generators are given.     

对海水进行混凝除浊预处理研究

介绍采用聚合氯化铁（PFC）为絮凝剂，对海水进行混凝除浊预处理方法。考察了原海水pH、搅拌速度、反应时间及PFC用量对海水预处理效果的影响。结果表明，在原海水pH凋至9．0，搅拌速度控制在200min^-1，反应时间选择8—10min，PFC用量0．10μg／g的最佳条件下，能使处理后的海水浊度降至0．05mol／L，而联产的酸性废水中和剂浆料中Mg（OH）2含量在25％～45％，大肠菌群的去除率大于89．3％。     

碱法造纸黑液驱油研究

在玻璃细珠充填柱人造岩心模型上进行了碱法造纸黑液驱替稠油的实验研究，考察了稠油酸值、盐、温度、岩心渗透率、注入量和注入方式的影响。在实验条件下碱法造纸黑液驱稠油的采收率较水驱提高２５％     

Ennoblement of stainless steel in natural seawater – A new explanation

The ennoblement of corrosion potential (E_corr) of passive metal immersed in seawater was investigated with electrochemical technology and epifluorescence microscopy. The in situ observation showed that the bacteria number increased on the metal surface according to an exponential law which was in the same way with the ennoblement of E_corr. At the same time, the anodic polarization current of high‐Mo stainless steel decreased in the initial days. According to the mix‐potential theory and the characteristics of polarization curves of high‐Mo steel in natural seawater, the ennoblement of corrosion potential may be induced by the decrease of the passive current density.     

海水介质中高活性镁合金负极的电化学性能

研制了一种新型镁合金负极材料；用电化学方法测定了镁合金负极在人造海水介质中的电化学性能，用浸泡法测定了材料在人造海水介质中的自腐蚀速度，用扫描电子显微镜观察了镁合金腐蚀后的表面形貌，并与AP65合金和纯镁进行了比较。结果表明，新研制的镁合金在人造海水介质中的开路电位增加，自腐蚀速度降低，稳定工作电位提高，电极表面腐蚀均匀，可开发用于高电性能电池的负极材料。     

海水冻融后轻骨料混凝土的双轴压压强度和变形性能

针对我国渤海湾北部海域轻骨料混凝土结构的工作环境和受力状态，进行了海水中不同冻融循环次数后轻骨料混凝土的双轴压压强度试验，考察了试件的破坏形态和表面裂缝的走向特征。根据试验结果，分析了极限抗压强度随冻融循环次数和应力比的变化规律，并在此基础上建立了考虑海水冻融影响的双轴压压强度准则。探讨了冻融循环作用后轻骨料混凝土的双轴压压变形性能，包括峰值应变、应力-应变关系随冻融循环次数和应力比的变化规律。研究结果说明，随冻融循环次数的增加各种应力比下的应力-应变关系曲线均逐渐扁平，峰值应力点明显下降并右移，说明混凝土的极限抗压强度逐渐降低。     

海水泵房土石方开挖及大围堰施工回顾

着重说明海水泵房临海的大围堰工程是厂区土石方开挖和厂房施工的先决条件之一。外方设计方案偏离厂址实际情况 ,存在许多施工难题。中方根据厂区实际情况 ,提出新的施工方案 ,不仅保证了1 998年 6月 8日第一罐混凝土施工 ,还节约了几百万资金     

镍基耐海水腐蚀材料的研究概况

综述了镍基耐海水腐蚀材料的研究概况,阐述了Ni-Cu,Ni-Cr,Ni-Mo和Ni-Cr-Mo合金的耐腐蚀性能及其影响因素,展望了该材料研究未来的发展方向。