环境中污染源废气检测方法及影响因素分析

对污染源废气监测原理进行了简单分析,阐述了当前我国常用的环境中污染源废气检测方法,并对废气检测影响因素及质量控制进行了深入探究。     

Burner Performance Evaluation Using Test Code

Development of new burner technology is common practice nowadays. Standardized test codes are available to conduct tests to determine operating characteristics and thermal performance of different parts of steam generating units. This paper describes the results of testing performed to evaluate thermal efficiency of a 74.5?kW fire-tube steam generator fired with a new premixed flame burner in comparison to a typical standard-retrofit diffusion flame burner system. Two premixed flame burners sized at 7.6 and 10.1?cm were tested. Testing was performed in accordance with the ASME PTC 4.1 Power Test Code. The evaluation was conducted in the range of small- to mid-sized, natural gas-fired applications, from 1.06?to?2.64×106?kJ/h. The environmental nitrogen oxide (NOx) emissions performance was also compared for both burner technologies. The results of this evaluation indicate that firing the test boiler with the 7.6?cm new burner slightly improves unit thermal efficiency by 4.0–3.3% for a unit load ranging from approximately 1.06?to?1.79×106?kJ/h, respectively. Operation with the 10.1?cm new burner improves the thermal efficiency by approximately 1.6% at 2.32×106?kJ/h. The uncertainty in the measurements used in the efficiency calculations should account for approximately ±1.5% uncertainty in the reported gross efficiency. Reductions in NOx emissions of the order of 10% resulted from operation with the new premixed flame burners.     

On-line emission and economic load dispatch using adaptive Hopfield neural network

This paper presents an adaptive Hopfield neural network (AHNN) based methodology, where the slope of the activation function is adjusted, for finding approximate Pareto solutions for the multi-objective optimization problem of emission and economic load dispatch (EELD). We have placed emphasis on finding solutions quickly, rather than the global Pareto solutions, so that our algorithm can be employed in large on-line power systems where variations in load are quite frequent. To enable faster convergence, adaptive learning rates have been developed by using energy function and applied to the slope adjustment method. The proposed algorithm has been tested on selected IEEE bus benchmark systems. The convergence of AHNN is found to be nearly 50% faster than the non-adaptive version.     

镧系钙钛矿型氧化物（LaBO3）的催化氧化性能及其净化效果的研究

本文在气相色谱仪联用微反应器装置上,研究了LaBO_3型催化剂中的B位元素对催化氧化活性的影响规律,并进行了程序升温脱附实验。另外,还对LaBO_3型载体催化剂进行了活性筛选,并在柴油机台架上与贵金属Pt/Al_2O_3进行了有害气体净化效果的对比实验。实验结果表明,LaBO_3氧化物中LaMnO_3对CO、CH_4的催化氧化活性最高,且CO、CH_4活性中心并不一致。LaMnO_3/γ-Al_2O_3浸渍微量助化剂后,能使CO在130℃完全氧化,CH_4的氧化温度在300～500℃范围内,LaMnO_3载体催化剂对柴油机有害排放物的净化率很低,浸渍微量助化剂后,净化率提高一倍以上,特别是LaMnO_3/堇青石蜂窝陶瓷,浸渍后的净化效果同贵金属Pt/Al_2O_3接近。     

场发射显示器件中真空获得和维持工艺的改进

真空的获得和维持是目前FED研究工作中存在的主要困难之一。本文研究了在现有的传统封接排气以及消气工艺的实验条件下 ,进行了多种工艺改进 :设计了一种新型的三层FED器件结构 ,在这种结构中 ,实现了蒸散型消气剂和非蒸散型消气剂的共同使用 ;并采用了气体保护 ,以及电子轰击去气等有效措施 ,实现了FED器件内部持久的高真空度 ,为FED阴极高稳定、长寿命工作提供了有力的保障     

An integrated system of biological and catalytic oxidation for the removal of o-xylene from exhaust

Biofiltration is an efficient technology for treatment of gaseous waste. Its disadvantages, however, include large volume of bioreactor and slow adaptation to fluctuating concentrations in waste gas. Catalytic oxidation offers a high destructive efficiency at relatively low operating temperature and small unit. A bench scale system integrated with a biofilter and a catalytic oxidation unit for the treatment of gases containing o-xylene was investigated in this study. The catalytic oxidation unit was packed with Cu/Al₂O₃ catalyst. The results showed that 90% of o-xylene could be removed in the biofilter at the load below 38.2 g m⁻³ h⁻¹. High o-xylene concentration in inlet gas resulted in an overload of the biofilter. Using the Cu/Al₂O₃ catalytic oxidation unit, the concentration of o-xylene could be reduced evidently. The combination of the chemical and microbial processes not only led to a high and stable efficiency of o-xylene conversion, but also improved capacity resisting the shock loads. The Cu/Al₂O₃ was studied for o-xylene oxidation in temperature range of 90–320 °C. The o-xylene conversion was improved correspondingly with the increasing of oxidation temperature. The reaction mechanism of o-xylene oxidation on Cu/Al₂O₃ was also investigated using diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS).     

场发射显示器支撑墙机械强度的计算与分析

计算了几种不同材料支撑墙在不同承压和允许倾斜角度范围内的应力和形变分布。计算结果表明 ,采用热压氮化硅或氧化锆陶瓷制作的支撑墙具有足够高的机械强度 ,是支撑墙材料的较好选择。     

焦炉装煤烟尘治理的烟气量计算

通过对焦炉装煤烟尘治理的烟气量计算和研究,提出不同治理系统的烟气量计算方法及应采取的措施。     

汽车排放控制系统中的氧传感器现状及展望

介绍了浓差型(Nernst型)、极限电流型和半导体电阻型等汽车排放控制系统中的氧传感器原理及结构。在综合该领域国内外研究现状的基础上,对氧传感器的发展进行了展望。     

Emission Of Volatile And Semivolatile Organic Compounds From Waterborne Paints – The Effect Of The Film Thickness

A waterborne paint was applied to tin plated steel sheets with three different film thicknesses. The emission of volatile and semivolaile organic compounds ((S) VOCs) from the samples was measured in small climatic chambers under standard conditions over a two-week period. The purpose of the study was to evaluate the effect of the film thickness on the emission rate decay. First order decay models, including sink effects for the high boiling (S) VOCs, were fitted to the concentration versus time data. The results showed that the first order rate constants decrease with increasing film thickness. In uddition, the results indicated that the emissions of the (S)VOCs in the waterborne paint film seemed to be controlled by evaporation. The thicknesses of paint films used in climatic chamber tests to estimate emission rates for product compurison or emission prediction must be known in order to prevent erroneous conclusions