Energy,exergy and exergoeconomic analysis of a steam power plant: A case study

The objective of this paper is to perform the energy, exergy and exergoeconomic analysis for the Hamedan steam power plant. In the first part of the paper, the exergy destruction and exergy loss of each component of this power plant is estimated. Moreover, the effects of the load variations and ambient temperature are calculated in order to obtain a good insight into this analysis. The exergy efficiencies of the boiler, turbine, pump, heaters and the condenser are estimated at different ambient temperatures. The results show that energy losses have mainly occurred in the condenser where 306.9 MW is lost to the environment while only 67.63 MW has been lost from the boiler. Nevertheless, the irreversibility rate of the boiler is higher than the irreversibility rates of the other components. It is due to the fact that the combustion reaction and its high temperature are the most significant sources of exergy destruction in the boiler system, which can be reduced by preheating the combustion air and reducing the air–fuel ratio. When the ambient temperature is increased from 5 to 24°C, the irreversibility rate of the boiler, turbine, feed water heaters, pumps and the total irreversibility rate of the plant are increased. In addition, as the load varies from 125 to 250 MW (i.e. full load) the exergy efficiency of the boiler and turbine, condenser and heaters are increased due to the fact that the power plant is designed for the full load. In the second part of the paper, the exergoeconomic analysis is done for each component of the power plant in order to calculate the cost of exergy destruction. The results show that the boiler has the highest cost of exergy destruction. In addition, an optimization procedure is developed for that power plant. The results show that by considering the decision variables, the cost of exergy destruction and purchase can be decreased by almost 17.11%. Copyright © 2008 John Wiley & Sons, Ltd.     

Isoconcentration mapping of particulate matter in Hamedan intercity bus stations

To accomplish this study, the total concentration of suspended particles, PM₁₀ and PM_2.5, was mapped at intercity bus stations in the central square of Hamedan. To measure the particulate matter (PM), portable air sampling systems that collect integrated filter samples were used. The PM concentration was collected at various time intervals and measured gravimetrically. The results were then analysed using the ArcView GIS 3.3 software to map the particulate dispersion patterns. The mean concentrations of the total suspended particles (TSP), PM₁₀ and PM_2.5 were 1220.94 ± 1418.5, 524.7 ± 217.5 and 386 ± 193.6 μg/m³, which were 16, 7.72 and 4.7 times greater than the World Health Organization (WHO) air quality standard, respectively. The PM concentration was not correlated with wind velocity or air temperature, but was correlated with humidity (P = 0.01). Overall, the results of this pilot study indicate that people at bus stations are exposed to respirable particulate matter (RPM) at levels high enough to pose a serious health risk.