Fabrication of direct Z-scheme FeIn2S4/Bi2WO6 hierarchical heterostructures with enhanced photocatalytic activity for tetracycline hydrochloride photodagradation

A series of direct Z-scheme FeIn₂S₄/Bi₂WO₆ hierarchical heterostructures with intimate interface contacts were synthesized by in-situ growth route and characterized by systematical analyses. All as-prepared FeIn₂S₄/Bi₂WO₆ nanocomposites showed significantly enhanced photocatalytic activity towards photodegradation for the removal of tetracycline hydrochloride (TCH) in comparison with individual FeIn₂S₄ and Bi₂WO₆. Meanwhile, the highest photocatalytic degradation activity can be achieved by modulating adding amount of FeIn₂S₄ in FeIn₂S₄/Bi₂WO₆ nanocomposites and the optimized component ratio of FeIn₂S₄ to Bi₂WO₆ is determined to be 10 wt%. The enhanced photocatalytic activity could be ascribed to efficient separation between photogenerated holes and electrons based on the construction of direct Z-scheme system. The high photocatalytic stability of resultant 10 wt% FeIn₂S₄/Bi₂WO₆ nanocomposites was revealed through six successive recycling reactions. The main intermediate generated during TCH photodegradation was explored by HPLC-MS. Besides, the direct Z-scheme photocatalytic mechanism was confirmed by band position analysis, electron spin resonance (ESR) and active species capture experiment.     

Solar light-driven reduction of crystal violet by a composite of g-C3N4, β-Ag2Se, γ-Fe2O3 and graphite

Abstract

In this work, a new g-C₃N₄-based Z-scheme with γ-Fe₂O₃ and β-Ag₂Se both n-type semiconductors, and graphite to favor electron exchange is presented. The composite material was studied by XRD, FTIR, UV-Vis, TEM, XPS, TGA, DSC and TOF-SIMS, and the ability of this photocatalytic system to act as a photo-reductant was assessed using crystal violet (CV⁺) dye. Solar light driven photo-reduction of CV⁺ in the presence of tri-sodium citrate evidenced a synergistic enhancement of the activity of the composite toward reduction, with ～20 times higher conversion rates per unit of surface area than those of g-C₃N₄. Photo-oxidation experiments under Xe lamp irradiation in the presence of H₂O₂ also showed that the AgFeCN composite featured a higher activity (～8×) than g-C₃N₄. This Z-scheme may deserve further study as a photo-reductant to obtain hydrogen or hydrogenated compounds. Moreover, the use of CV⁺ may represent a facile procedure that can aid in the selection of new photocatalysts to be used in hydrogen production.     

Electrocatalysis of chlorine evolution on different materials and its influence on the performance of an electrochemical reactor for indirect oxidation of pollutants

Two different Ti/Pt–Ir materials (commercial and home made) and Ti/PdO + Co₃O₄ were investigated for their electrocatalytic properties versus Cl₂ evolution reaction. The materials were used in a batch electrochemical reactor to treat biologically recalcitrant di-azo compound. An electrochemically driven oxidation, mediated by a Cl₂/Cl⁻ couple, proved efficient for destruction of this complex organic molecule, causing cleavage of the conjugated double bonds and destruction of unsatured bonds. Both Ti/Pt–Ir materials performed well; lower kinetics obtained with the Ti/PdO + Co₃O₄ anode was caused by adsorption of the model compound, evidenced in preliminary voltammetric measurements. The dye oxidation reaction followed the second order kinetics with partial orders in the model compound and (time varying) chlorine concentrations equal to one. Specific energy consumption of 3.12 kWh m⁻³ proved the process more economic than the homogeneous phase oxidation.     

INDIRECT ACCELERATED ADAPTIVE FUZZY CONTROLLER

According to a type of normal nonlinear system, an indirect adaptive fuzzy （IAF） controller has been applied to those systems where no accurate mathematical models of the systems under control are available. To satisfy with system performance, an indirect accelerated adaptive fuzzy （IAAF） controller is proposed, and its general form is presented. The general form IAAF controller ensures necessary control criteria and system＇s global stability using Lyapunov Theorem. It has been proved that the close-loop system error converges to a small neighborhood of equilibrium point. The optimal IAAF controller is derived to guarantee the process＇s shortest settling time. Simulation results indicate the IAAF controller make the system more stable, accurate, and fast.     

Production of hydrogen over bimetallic Pt–Ni/δ-Al2O3: I. Indirect partial oxidation of propane

Indirect partial oxidation (IPOX) of propane was studied over bimetallic 0.2 wt.% Pt–15 wt.% Ni/δ-Al₂O₃ catalyst in the 623–743 K temperature range. The unreduced and reduced forms of the catalyst were characterized by ESEM–EDAX and X-ray diffraction (XRD). In the IPOX tests, the effects of steam to carbon ratio (S/C), carbon to oxygen ratio (C/O₂) and residence time (W/F (g_cat h/mol HC)) on the hydrogen production activity, selectivity and product distribution were studied in detail. The effect of temperature program applied (increasing from 623 to 743 K, ITP; decreasing from 743 to 623 K, DTP) during reaction was also tested. The results showed that the Pt–Ni bimetallic system has superior performance characteristics compared to the monometallic catalysts reported in literature. The reason is thought to be the utilization of the catalyst particles as micro heat exchangers during IPOX; the heat generated by Pt sites during exothermic total oxidation (TOX) being readily transferred through the catalyst particles acting as micro heat exchangers to the Ni sites, which promote endothermic steam reforming (SR). The optimal conditions were found as S/C = 3, C/O₂ = 2.70 and W/F = 0.51 g_cat h/mol HC for IPOX of propane on the basis of high hydrogen productivity and selectivity between 623 and 748 K for the experimental conditions tested. The thermo-neutral points obtained showed the sustainability of reaction in terms of energy.     

公钥基础设施中拥有证明问题的解决方案

介绍了公钥基础设施中拥有证明的概念，并根据实际应用中的不同情况详细地说明了各自相应的解决方案，重点集中在加密证书拥有证明的间接方式的解决方案。     

Visual learning and classification of human epithelial type 2 cell images through spontaneous activity patterns

Identifying the presence of anti-nuclear antibody (ANA) in human epithelial type 2 (HEp-2) cells via the indirect immunofluorescence (IIF) protocol is commonly used to diagnose various connective tissue diseases in clinical pathology tests. As it is a labour and time intensive diagnostic process, several computer aided diagnostic (CAD) systems have been proposed. However, the existing CAD systems suffer from numerous shortcomings due to the selection of features, which is commonly based on expert experience. Such a choice of features may not work well when the CAD systems are retasked to another dataset. To address this, in our previous work, we proposed a novel approach that learns a set of filters from HEp-2 cell images. It is inspired by the receptive fields in the mammalian's vision system, since the receptive fields can be thought as a set of filters for similar shapes. We obtain robust filters for HEp-2 cell classification by employing the independent component analysis (ICA) framework. Although, this approach may be held back due to one particular problem; ICA learning requires a sufficiently large volume of training data which is not always available. In this paper, we demonstrate a biologically inspired solution to address this issue via the use of spontaneous activity patterns (SAP). The spontaneous activity patterns, which are related to the spontaneous neural activities initialised by the chemical release in the brain, are found as the typical stimuli for the visual cell development of newborn animals. In the classification system for HEp-2 cells, we propose to model SAP as a set of small image patches containing randomly positioned Gaussian spots. The SAP image patches are generated and mixed with the training images in order to learn filters via the ICA framework. The obtained filters are adopted to extract the set of responses from a HEp-2 cell image. We then employ regions from this set of responses and stack them into “cubic regions”, and apply a classification based on the correlation information of the features. We show that applying the additional SAP leads to a better classification performance on HEp-2 cell images compared to using only the existing patterns for training ICA filters. The improvement on classification is particularly significant when there are not enough specimen images available in the training set, as SAP adds more variations to the existing data that makes the learned ICA model more robust. We show that the proposed approach consistently outperforms three recently proposed CAD systems on two publicly available datasets: ICPR HEp-2 contest and SNPHEp-2.     

基于物元特征关联度及网络层次分析法的评价及应用

本文基于物元分析理论及MINE算法的思想,提出了物元特征关联度的定义;将物元特征关联度应用到网络层次分析法（ANP）评价方法中,构造了股票价值评估的客观赋权模型,并给出了股票价值评估的ME-ANP算法,以上市公司的财务数据为基础,对股票价值给予具体评估,同时说明了本文所构建的模型及算法的有效性。     

铝合金支架间接挤压铸造的研究

基于有限差分法，对大型铝合金支架间接挤压铸造充型和凝固过程进行了数值模拟。通过对模拟结果的分析，确定了浇注温度为700℃，压射速度为0．03m／s，完成了模具结构和工艺设计，并制作了模具，进行了支架挤压铸造的试制。分析了试制过程铸件缺陷产生的原因，发现气孔和氧化夹渣等是主要缺陷，通过调整脱模剂的配方，适当减少脱模剂的喷涂，缩短挤压铸造循环时间等，获得了品质和性能良好的支架铸件。     

TIG自动焊的间接接触引弧

本文介绍一种安全可靠,低成本的TIG自动焊间接引弧装置。其特点是利用辅助电极引燃辅助电弧,再引燃焊接电弧。