The role of microbial electrogenesis in regulating methane and nitrous oxide emissions from constructed wetland-microbial fuel cell

This study assesses a sustainable solution to greenhouse gases (GHGs) mitigation using constructed wetland-microbial fuel cells (CW-MFC). Roots of wetland plant Acorus Calamus L. are placed in biological anode to better enable anode microorganisms to obtain rhizosphere secretion for power improvement. Three selected cathode materials have a large difference in GHG emissions, and among them, carbon fiber felt (CFF) shows the lowest emissions of methane and nitrous oxide, which are 0.77 ± 0.04 mg/(m²·h) and 130.78 ± 13.08 μg/(m²·h), respectively. The CFF CW-MFC achieves the maximum power density of 2.99 W/m³. As the influent pH value is adjusted from acidic to alkaline, the GHGs emissions are reduced. The addition of Ni inhibits GHGs emission but decreases the electricity, the power density is reduced to 1.09 W/m³, and the methane and nitrous oxide emission fluxes decline to 0.20 ± 0.04 mg/(m²·h) and 15.49 ± 1.86 μg/(m²·h), respectively. Low C/N ratio reduces methane emission, while high C/N ratio effectively inhibits nitrous oxide emission. At the influent pH 8 and C/N = 5:1, the methane emission flux is approximately 10.60 ± 0.27 mg/(m²·h), and the nitrous oxide emission flux is only 10.90 ± 1.10 μg/(m²·h). Based on the above experimental results by controlling variable factors, it is proposed that CW-MFC offers an environment-friendly solution to regulate GHG emissions.     

Electrophoretic deposition of graphene oxide on carbon brush as bioanode for microbial fuel cell operated with real wastewater

Microbial fuel cell (MFC) is a promising technology for simultaneous wastewater treatment and energy harvesting. The properties of the anode material play a critical role in the performance of the MFC. In this study, graphene oxide was prepared by a modified hummer's method. A thin layer of graphene oxide was incorporated on the carbon brush using an electrophoretic technique. The deoxygenated graphene oxide formed on the surface of the carbon brush (RGO-CB) was investigated as a bio-anode in MFC operated with real wastewater. The performance of the MFC using the RGO-CB was compared with that using plain carbon brush anode (PCB). Results showed that electrophoretic deposition of graphene oxide on the surface of carbon brush significantly enhanced the performance of the MFC, where the power density increased more than 10 times (from 33 mWm^?2 to 381 mWm^?2). Although the COD removal was nearly similar for the two MFCs, i.e., with PCB and RGO-CB; the columbic efficiency significantly increased in the case of RGO-CB anode. The improved performance in the case of the modified electrode was related to the role of the graphene in improving the electron transfer from the microorganism to the anode surface, as confirmed from the electrochemical impedance spectroscopy measurements.     

Impact of high-intensity ultrasound on physical properties and degree of oxidation of lipase modified menhaden oil with caprylic acid and/or stearic acid

The purpose of this research was to determine the effect of high-intensity ultrasound (HIU) on physical properties, degree of oxidation, and oxidative stability of structured lipids (SLs). Caprylic acid (C) and stearic acid (S) were incorporated into menhaden oil using Lipozyme® 435 lipase to obtain five samples: (1) LC 20 (menhaden oil with 20% of C), (2) LC 30 (menhaden oil with 30% C), (3) LS 20 (menhaden oil with 20% S), (4) LS 30 (menhaden oil with 30% S), and (5) Blend C (menhaden oil with 16.24% C and 13.04% S). Samples were crystallized for 90 min at the following temperatures: (1) LC 20 at 15.5°C, (2) LC 30 at 17.5°C, (3) LS 20 at 24°C, (4) LS 30 at 30°C, and (5) Blend C at 18.0°C, and HIU was applied at the onset of crystallization. Physical properties, degree of oxidation, and oxidative stability were evaluated in sonicated and nonsonicated samples. All SLs had statistically higher G′ after sonication. Sonicated LS 30, LC 30, and Blend C had a higher melting enthalpy than the nonsonicated ones, while enthalpy values in sonicated LS 20 and LC 20 samples were not statistically different than the nonsonicated ones. No significant difference between sonicated and nonsonicated samples was observed in peroxide values (1.2 ± 0.1 meq/kg, p > 0.05) and in the oxidative stability index (6.3 ± 0.2 h, p > 0.05). These results showed that HIU was effective at changing physical properties without affecting the oxidation of the samples.     

Investigation on sulphonated zinc oxide nanorod incorporated sulphonated poly (1,4-phenylene ether ether sulfone) nanocomposite membranes for improved performance of microbial fuel cell

Hydrothermally prepared zinc oxide nanorods are sulphonated (S–ZnO NR) and incorporated into 15% Sulphonated Poly (1,4-Phenylene Ether Ether Sulfone) (SPEES) to improve the hydrophilicity, water uptake and ion transfer capacity. Water uptake and ion transfer capacity increased to 34.6 ± 0.6% and 2.0 ± 0.05 meq g^?1 from 29.8 ± 0.3% and 1.4 ± 0.04 meq g^?1 by adding 7.5 wt% S–ZnO NR to SPEES. Morphological studies show the prepared S–ZnO NR is well dispersed in the polymer matrix. SPEES +7.5 wt% S–ZnO NR membrane exhibits optimum performance after three-weeks of continual operation in a fabricated microbial fuel cell (MFC) to produce a maximum power density of 142 ± 1.2 mW m^?2 with a reduced biofilm compared to plain SPEES (59 ± 0.8 mW m^?2), unsulphonated filler incorporated SPEES (SPEES + 7.5 wt% ZnO, 68 ± 1.1 mW m^?2) and Nafion (130 ± 1.5 mW m^?2) thereby suggesting its suitability as a sustainable and improved cation exchange membrane (CEM) for MFCs.     

Metabolism of phospholipids in the yeast Schizosaccharomyces pombe

The fission yeast Schizosaccharomyces pombe is an important model organism for the study of fundamental questions in eukaryotic cell and molecular biology. A plethora of cellular processes are membrane associated and/or dependent on the proper functioning of cellular membranes. Phospholipids are not only the basic building blocks of cellular membranes; they also serve as precursors to numerous signaling molecules. In this review, we describe the biosynthetic pathways leading to major S. pombe phospholipids, how these pathways are regulated, and what is known about degradation and turnover of fission yeast phospholipids. This review also addresses the synthesis, regulation and the role of water-soluble phospholipid precursors. The last chapter of the review is devoted to the use of S. pombe for the biotechnological production of value-added lipid molecules.     

Metabolism of Storage Lipids and the Role of Lipid Droplets in the Yeast Schizosaccharomyces pombe

Storage lipids, triacylglycerols (TAG), and steryl esters (SE), are predominant constituents of lipid droplets (LD) in fungi. In several yeast species, metabolism of TAG and SE is linked to various cellular processes, including cell division, sporulation, apoptosis, response to stress, and lipotoxicity. In addition, TAG are an important source for the generation of value-added lipids for industrial and biomedical applications. The fission yeast Schizosaccharomyces pombe is a widely used unicellular eukaryotic model organism. It is a powerful tractable system used to study various aspects of eukaryotic cellular and molecular biology. However, the knowledge of S. pombe neutral lipids metabolism is quite limited. In this review, we summarize and discuss the current knowledge of the homeostasis of storage lipids and of the role of LD in the fission yeast S. pombe with the aim to stimulate research of lipid metabolism and its connection with other essential cellular processes. We also discuss the advantages and disadvantages of fission yeast in lipid biotechnology and recent achievements in the use of S. pombe in the biotechnological production of valuable lipid compounds.     

The amylose and lipid contents,dimensions, and gelatinisation characteristics of some wheat starches and their A- and B-granule fractions

Starches isolated from 23 bread wheats (Triticum aestivum) and 26 durum wheats (T. durum) contained 26.3-30.6% (mean 29.1%) total amylose, 19.3–25.1% (mean 22.9%) apparent amylose and 783–1144mg 100g^?1 (mean 977 mg 100g^?1) lysophos-pholipids. Gelatinisation temperatures were 57.3–64.9°C (mean 61.8°C) and enthalpies 6.4–11.8 Jg^?1 (mean 9.7Jg^?1) in excess water, measured by differential scanning calorimetry. There were no correlations between any of these parameters. Starch granule size distributions were determined with a Coulter Counter and 100–channel analyser. A-granule mean volumes were 1235–2585μm³ (av. 1778), modal volumes 863–1804μm³ (av. 1264), mean diameters 13.9–16.0μm (av. 13.99), and specific surface areas 0.236–0.302m²g^?1. B-granule mean volumes were 35.4–100.4μm³ (av. 55.9), modal volumes 16.5–54.5μm³ (av. 27.7), mean diameters 3.66–5.07μm (av. 4.09), and specific surface areas 0.684–0.920m²g^?1. The B-granule contents of the starches were 12.8–34.6% (av. 27.3) by weight (sedimentation method) and 13.0–37.3% (av. 24.0) by volume (Coulter method), the latter being the more accurate method.     

罐装降脂减肥果茶生产工艺的研究

本文介绍了以各种中药材为主要原料 ,配以茶叶为辅料 ,运用先进的处理方法制备降脂减肥果茶的生产工艺、质量标准 ,并对确定生产工艺的几个主要问题进行了探讨     

Comparison of six methylation methods for analysis of the fatty acid composition of albacore lipid

Six methods widely used to produce methyl esters for the gas chromatographic determination of the fatty acid composition of a marine lipid were compared. Four acid-catalyzed methods (1% H₂SO₄: CH₃OH; 5% HCl: CH₃OH; 7% and 14% BF₃: CH₃OH) and two base-catalyzed methods [0.5M NaOCH₃: CH₃OH; (1:4) tetramethylguanidine: CH₃OH] were used.
The use of BF₃: CH₃OH (7% and 14%) gave a lower content of 18:1 n9 than the other methods and produced an artefact (2.7–3.2% of total fatty acid content) eluting between the 20:5 and 24:1 fatty acid methyl esters. No significant differences were obtained between the other four methods.
Accordingly the use of BF₃: CH₃OH for transmethylation of marine lipids is not recommended. Results obtained in the other four methods showed that all are comparable.     

Nutritive quality of the alkaloid-poor Washington lupin (Lupinus polyphyllus lindl var SF/TA) as a potential protein crop

Abstract : An alkaloid-poor line of Washington lupin (Lupinus polyphyllus Lindl var SF/TA) was developed in an experiment started in 1982. The nutritive quality (alkaloid content, protein and amino acids, fat and fatty acids. macro- and micronutrients, fibre, sugars) yields, and seed quality of this line were studied. The results show that the total alkaloid content was low and varied in different seeds from 226 μg g^?1 to 366 μg g^?1 of dry matter. The main alkaloid was lupanine, but 16 other alkaloids (including sparteine and gramine) were also present. The var SF/TA cannot yet be used for human nutrition without processing although it would be a valuable protein crop. The results confirm that seeds which look different also vary in chemical composition.