Use of a smartphone-based Student Response System in large active-learning Chemical Engineering Thermodynamics classrooms

Smartphones are a promising tool as student response systems (SRS) for interactive teaching due to their widespread diffusion. Here, the main purpose is to assess the efficacy of smartphone-based SRS in large classroom settings of undergraduate Thermodynamics, as representative of engineering courses requiring high-level cognitive skills for problem solving. Four sets of multiple-choice questions were presented during the course. Overall, the results refer to 1055 students between control and SRS classes, each corresponding to a3 years period.One of the main results of this work is the strong linear correlation between the average questionnaire score and the final exam grade (R² = 0.91). A similar correlation, although with a lower value of R², is already found in the first questionnaire, thus showing the SRS high predictive power of class performance. The results of this study provide guidance for a quantitative use of smartphone-based SRS in teaching basic disciplines. The SRS monitoring capability allows early detection of struggling students, thus paving the way to personalized tutoring and improved student engagement in active learning practices. This approach is especially important in emergency situations, such as the SARS-Cov-2 pandemic, when distance learning is widely adopted, and remote interactive tools are highly needed.     

Exergoeconomic performances of the desiccant-evaporative air-conditioning system at different regeneration and reference temperatures

This paper presented the exergoeconomic evaluation of the developed desiccant-evaporative air-conditioning system. The developed system was evaluated based on the steady-state conditions at different regeneration and reference temperatures. The exergoeconomic evaluation method was implemented to the system components and the whole system to evaluate the exergy efficiency, exergy destruction ratios, cost rates, relative cost differences and exergoeconomic factors. The regeneration and reference temperatures affected the exergy efficiencies, exergy destruction ratios, cost rates, relative cost differences and exergoeconomic factors. The desiccant wheel, heating coil and evaporative cooler had a high cost rate (investment cost, operation and maintenance cost, and exergy destruction cost). The exit air fan, outdoor air fan and evaporative cooler had a high relative cost difference. The exit air fan, outdoor air fan and secondary heat exchanger had a high exergoeconomic factor. Replacement of the desiccant wheel with a higher dehumidification performance could decrease the high cost rate. A higher efficiency evaporative cooler and heating coil were needed. Cheaper air fans (outdoor air fans and exit air fans) were needed.     

冶金过程中复杂夹杂物和钢液化学平衡计算

本文提出一个同温冶炼过程中预测非金属夹杂物沉淀的计算机程序。本研究中，多元硅酸盐溶体的Ｇｉｂｂｓ自由能由基于统计热力学的晶胞模型来计算，该晶胞模型按照氧与周围的阳离子构成的对称和非对称晶胞来描述硅酸盐熔体结构，假定高温冶炼时认与非金属夹杂物平衡，钢液中氧化物元素的活度由Ｗａｇｎｅｒ交互作用系数来计算，利用本程序可以估计炼钢时沉淀的非金属氧化物的成分，为调整冶炼工艺和提高产品质量提供指导，进一步可计     

Criteria and methodology for the evaluation of conservation interventions on treated porous stone susceptible to salt decay

Susceptibility of stone to salt decay is directly related to its microstructural and mechanical characteristics. In the present work, a porous stone from a quarry in Cyprus was examined. Samples of this stone were consolidated and protected with certain conservation materials. The modification of microstructural characteristics of the stone was evaluated by mercury intrusion porosimetry, while its mechanical characteristics were measured by compressive and bending strength tests. From these data, the susceptibility of Cyprus stone to salt (NaCl) decay was estimated. The values of crystallization pressure of NaCl were calculated and compared to the experimentally measured compressive and tensile strength of the stone, in order to examine the probability of stone disruption due to salt crystallization. The development of the phenomenon after coarse pores’ filling with crystals, i.e. crystallization of salts in capillaries or mechanical failure of the stone, was determined by thermodynamic analysis. Additionally, artificial weathering tests of marine salt spray were performed for the evaluation of stone’s durability after the conservation. The treated stone proved to be resistant to salt decay, as it presented ameliorated microstructural and mechanical characteristics, concerning decay due to soluble salt crystallization. The most possible thermodynamic scenario was small pores repletion with crystals, avoiding mechanical failure of the stone.     

Physical Simulation of Thermally Induced Martensite Formation from Retained Austenite in TRIP Steels

The present work analyses the total free energy of the material during the martensitic transformation. A general expression for the martensite fraction as a function of temperature is derived, assuming that the nonchemical free energyis proportional to th     

PSI’s 1 kW imaging furnace—A tool for high-temperature chemical reactivity studies

A new experiment has been installed to conduct studies at temperatures as high as 2500 K on chemical reactions that involve solids or melts and the release of condensable gases. The sample is radiatively heated by a 1 kW xenon short arc lamp placed in the upper focus of a vertically oriented ellipsoid of revolution. The optimal optical configuration has been determined by a Monte-Carlo Ray tracing method. Several methods to machine the reflector have been evaluated by experimentally determining the optical quality of the surface of plane test pieces. In the imaging furnace the sample is placed on a water-cooled support and heated by the concentrated radiation. This arrangement allows for fast heating and impedes the reaction of the sample with crucible material. A remotely controlled hammer allows for freezing the high-temperature composition of the sample by a fast quench. Thus, the sample can be later analyzed by conventional methods such as XRD or TEM. To allow for measurements under defined atmospheres and to protect the ellipsoidal reflector from liberated condensable products, the entire sample stage is enclosed by a hemispherical glass dome. The dome itself is protected from condensable compounds by a laminar flow of inert gas. Experiments with an incense cone at the place of the sample to visualize the gas flow showed that a steady layer of inert gas protects the dome from smoke, if the inert gas flow is properly adjusted. Measured peak flux densities clearly exceed 500 W cm⁻² required to access temperatures of at least 2500 K. Decomposition experiments on copper sulfides confirmed the operation of the furnace. In the near future flash assisted multi-wavelength pyrometry (FAMP) will be implemented to measure sample temperatures online. Though the imaging furnace was developed to study the decomposition of metal sulfides it is obviously suited to conduct high-temperature studies on most materials relevant for high-temperature solar technology.     

Preparation of nickel-tungstate catalysts by a novel impregnation method

Nickel-tungstate/γ-alumina (NiW) catalysts were prepared by an incipient wetness impregnation method using citric acid as a complexing agent. Citric acid has been used by our research group in preparing cobalt-molybdate and nickel -molybdate catalysts. The extended X-ray absorption fine structure (EXAFS) data of the impregnating solutions indicated that citric acid contributes to the formation of polytungstate anions that are smaller than the dodecatungstate ions formed when conventional ammoniacal solutions are used. Sulfided NiW catalysts prepared by using citric acid showed higher hydrogenation activity and hydrogenation selectivity than NiW catalysts prepared using the conventional ammoniacal solutions.     

AlN 粉末制备的热力学分析和实验研究

对制备 AlN 的体系 AlCl_3-NH_3-N_2进行了热力学分析,确立了 AlN 粉末合成所需要的热力学条件.在700～1000℃下,利用无水 AlCl_3和 NH_3的化学气相淀积反应合成得到了高纯 AlN 超细粒子粉末,研究了反应温度、AlCl_3浓度和总流量等对 AlN 粉末理化性质的影响.实验确立了产物低温和高温热处理条件.     

Ti/AlN陶瓷界面反应的热力学研究

对AlN陶瓷在室温和超高真空条件下蒸镀金属钛过程的界面反应进行了热力学研究，并用X光电子能谱（XPS）进行了验证，表明在金属钛沉积以前AlN陶瓷在空气中表面部分被氧化，当样品沉积了金属钛后，刚沉积上的钛是氧化状态，随着钛沉积厚度的增加，表面TiN和Al2O3的成分都增加。