Fully coupled LES-DEM of particle interaction and agglomeration in a turbulent channel flow

Coupled large eddy simulation and the discrete element method are applied to study turbulent particle–laden flows, including particle dispersion and agglomeration, in a channel. The particle–particle interaction model is based on the Hertz–Mindlin approach with Johnson–Kendall–Roberts cohesion to allow the simulation of van der Waals forces in a dry air flow. The influence of different particle surface energies, and the impact of fluid turbulence, on agglomeration behaviour are investigated. The agglomeration rate is found to be strongly influenced by the particle surface energy, with a positive relationship observed between the two. Particle agglomeration is found to be enhanced in two separate regions within the channel. First, in the near-wall region due to the high particle concentration there driven by turbophoresis, and secondly in the buffer region where the high turbulence intensity enhances particle–particle interactions.     

A modified cross-correlation algorithm for PIV image processing of particle-fluid two-phase flow

PIV (Particle Image Velocimetry) technique for flow field measurement has achieved popular self-identify through over ten years development, and its application range is becoming wider and wider. PIV post-processing techniques have a great influence on the success of particle-fluid two-phase flow field measurement and thus become a hot and difficult topic. In the present study, a Phase Respective Identification Algorithm (PRIA) is introduced to separate low-density solid particles or bubbles and high-density tracer particles from the PIV image of particle-fluid two-phase flow. PTV (Particle Tracking Velocimetry) technique is employed to calculate the velocity fields of low-density solid particles or bubbles. For the velocity fields of high-density solid particles or bubble phase and continuous phase traced by high-density smaller particles, based on the thought of wavelet transform and multi-resolution analysis and the theory of cross-correlation of image, a delaminated processing algorithm (MCCWM) is presented to conquer the limitation of conventional Fourier transform. The algorithm is firstly testified on synthetic two-phase flows, such as uniform steady flow, shearing flow and rotating flow, and the computational results from the simulated particle images are in reasonable agreement with the given simulated data. The algorithm is then applied to images of actual bubble-liquid two-phase flow and jet flow, and the results also confirmed that the algorithm proposed in the present study has good performance and reliability for post-processing PIV images of particle-fluid two-phase flow.     

A new adaptation of mapping method to study mixing of multiphase flows in mixers with complex geometries

The main objective of the present work is to modify the traditional mapping method for the simulation of distributive mixing of multiphase flows in geometries involving moving parts such as, internal mixers or twin-screw extruders without a limitation on their geometrical periodicity. The periodicity condition, limits the results of traditional mapping method to tracking mapping mesh between specific discrete time intervals or distances for that geometry is repeated, hence, result is only for fixed orientation of rotors. Imaginary domain method is introduced to track mapping mesh from one state to the next free of geometrical periodicity limitations. In this work the method is introduced and its applicability and accuracy is discussed in details. A two-dimensional (2D) simulation of mixing of two Newtonian fluids with different viscosities in an intermeshing internal mixer is used as a test case study. In this example the key issues of ability to predict mixing state in details for all orientations of rotors is presented. To reduce diffusion errors of mapping method in the boundaries of the rotors, mapping mesh refinement technique that relies upon one single reference mesh is also presented.     

Ice-slurry production using direct contact heat transfer

An ice slurry generation system was developed using direct contact heat transfer between water and the coolant, Fluroinert FC-84. The location of the coolant nozzle is an important design consideration to avoid clogging due to freezing of water. An ice fraction of up to about 40 percent was obtained with the nozzle located at the bottom of the ice slurry tank and the jet directed upwards into the water. Two simplified model were developed to extract the heat transfer coefficient between the coolant drops and the water. The first model requires as input the average drop diameter and the residence time while the second model uses the measured drop diameter distribution. The estimated heat transfer coefficients are much smaller than those computed using single-sphere correlations.     

气液两相流流量的互相关测量

在内径为３０ｍｍ的垂直上升管中，应用互相关分析和Ｕ型光导纤维探针，对水一气两相流和油－气两相流进行了各分相流量测量的实验研究，考虑了流型和雷诺数对流量测量的影响，同时研究了含气率的测量，提出了计算平均含气率的关系式。对水－气两相流，试验的气相折算流速范围为０．２２～３．００ｍ／ｓ，波相折算流速范围为０．１１～３．００ｍ／ｓ；对油一气两相流，试验的气相折算流速范围为０．１０～１９．０１ｍ／ｓ，液相折算流速范围为０．３５～１．６５ｍ／ｓ。     

CALCULATION ON TWO-PHASE FLOW TRANSIENTS AND THEIR EXPERIMENTAL RESEARCH

From basic equations of gas-liquid, solid-liquid, solid-gas two-phase flow, the calculating method on flow transients of two-phase flow is developed by means of characteristic method. As one example, a gas-liquid flow transient is calculated and it agrees well with the experimental result. It is shown that the method is satisfactory for engineering demand.     

非致命打击武器系统内弹道模拟研究

为了实现对非致命防暴武器发射能量的调节并控制其终点效能,解决"近处不敢打,远处打不到"的问题,提出了恒量动能非致命打击武器系统这一全新理论,在选用了两相流内弹道模型的基础上,采用四阶龙格库塔法,利用MATLAB语言仿真技术进行编程测试,对改进型18.4mm防暴枪的内弹道进行数值仿真,并将模拟结果与实验结果进行分析比对,验证了内弹道模型和仿真结果的正确性,得到了发射过程中,膛内火药燃烧及燃气流动状态的变化规律,弄清了泄气孔位置、气室容积以及泄气孔半径对弹丸初速的影响规律,为非致命防暴武器的进一步发展打下了坚实的基础。     

High-temperature sulfidation of Fe-Nb alloys

The sulfidation behavior of Fe-Nb alloys containing up to 30 w/o Nb was studied over the range of 600–900°C in 0.01 aim. S₂ vapor. All alloys were two-phase, consisting of an Fe-rich solid solution and Fe₂Nb, and followed the parabolic rate law at all temperatures. Scales consisted of two layers-an outer layer of FeS and an inner, complex layer which contained some FeS, FeNb₂S₄ (possibly some FeNb₃S₆), NbS₂, and intermetallic particles which were either completely or only partially sulfidized. Platinum markers were located always at the interface between the two layers, which corresponded to the original metal surface. Activation energies were 18±3 kcal/mol in close agreement with the 19.8 reported for pure iron. The sulfidation rate decreased markedly with increasing Nb content of the alloys. The decrease is attributed to increasing amounts of Fe₂Nb with increasing Nb, the net effect being that the diffusion path for outward iron diffusion through the inner layer is reduced as the Nb content increases. An analysis of the structure of NbS₂ reveals that it is easily intercalated with Fe between loosely bonded layers of S-Nb-S. The S-Nb-S layers are covalently bonded which results in very low diffusivities of either S or Nb in pure NbS₂. Although intercalated Fe tends to change the Van der Waal's type bonding between layers to more ionic or covalent, Fe diffuses readily between the layers in NbS₂. Intercalation of Fe also increases the concentration of sulfur defects in NbS₂, which in turn increases the diffusivity of sulfur. Nb was observed to be immobile. Thus, it is thought that either outward iron diffusion or inward sulfur diffusion in the inner layer is the rate-controlling step, in spite of the close agreement of activation energies with that of the sulfidation of pure iron.     

项目项目:西安交通大学博士论文基金项目

提出了一种基于空间矢量定向的二相电磁搅拌器逆变电源的结构和控制策略,该逆变器采用六桥臂式主电路拓扑结构,逆变器的第三相桥臂与两相电磁搅拌器的中点相连.采用正交矢量控制方法完成对两相电磁搅拌器电流和频率的解耦控制,使输出两相低频正弦波电流的相位差为90°,实现了恒流源控制特性.该逆变器的拓扑类型和采用的控制策略可以有效的改善逆变器的动态特性和控制精度,降低电磁搅拌器电源谐波电流的含量.     

INVESTIGATION OF THE USE OF LASER-DOPPLER VELOCIMETRY IN TWO-PHASE BUBBLY FLOWS

Understanding the dynamic phenomena of viability loss of shear sensitive cells and bubble breakage and coalescence within airlift reactors requires knowledge of local, liquid-phase hydrodynamics. The laser-Doppler velocimeter (LDV) is a non-invasive instrument which may be used to obtain this information. Experimental procedures and software were developed to detect and measure Doppler bursts in two-phase flow in a split-cylinder airlift reactor. Off-line analysis of the data indicated a detection rate approximately one order of magnitude greater than that observed using an available commercial frequency tracker. Approximately 400 to 500 observations are needed for the ensemble mean to characterize the local mean velocity to within ±5% for a superficial gas velocity of 10.4 cm/s, the highest superficial gas velocity used in these studies. The limitations, prospects, and signal-processing options for LDV in this application are also discussed