Experimental investigation of supercapacitor based regenerative energy storage for a fuel cell vehicle equipped with an alternator

Recently, researchers have devoted more attention to supercapacitors (SCs) to integrate with batteries in energy storage systems (ESSs) for vehicle applications. In this study, we attempted to characterize the use of SCs in the ESS for a PEM fuel cell vehicle equipped with an alternator to maximize the performance of regenerative braking. We applied lithium-ion batteries (LIBs) and SCs as energy storage devices to examine their effect on ESS. Then we used a hysteresis brake to apply controllable braking force on the flywheel to form hybrid braking (HB) and made efforts to study its behavior to suggest a braking control strategy. We also ran the whole system over the rotational speed to cover the range of driving speed. At last, we sized the SCs for the most commonly used fuel cell electric vehicle (FCEV) in Korea, i.e., Hyundai NEXO, based on the results obtained from the above study by alternator efficiencies.     

提高托盘利用效率的重要手段——电子信息化管理

托盘能否有效运用对物流的畅通与否关系重大,这已经引起了国内外专家和学者们的重视,并就此制定了托盘电子信息化管理系统,旨在更合理地使用托盘,推进托盘一体化和共用系统的建立。而RFID技术在托盘的电子信息化管理的应用更将大大提高物流的效率与准确性,托盘电子信息化管理将成为今后托盘管理的趋势。     

8096/8098单片机集成开发系统

本集成开发环境集编辑、编译、调试和运行于一体,模拟了MCS-96系列单片机的指令系统,并给教学、实验、应用、科研和单片机的开发提供了强有力的手段。     

管材拉伸模具定径区摩擦力的探讨

管材拉伸时把模具定径区看作准塑区，利用塑性条件，研究定径区摩擦力对拉伸力的影响，并对计算公式进行探讨。证明管材空拉（减径不减壁）时摩擦力影响可忽略不计，但减径、减壁拉伸同时进行时，定径区摩擦力对拉伸力的影响就必须考虑。     

φ100mm定径机轧辊孔型设计改进

针对定径机换辊后定径钢管所出现的质量问题,提出了成品机架的轧辊孔型不分配变形量和适当增大孔型直径的改进措施。     

On-demand Virtual Neonatal Intensive Care units supporting rural, remote and urban healthcare with Bush Babies Broadband

Premature and ill term babies born in regional Australia must be moved to another hospital with Neonatal Intensive Care Unit (NICU) facilities. Transferred pre-term and critically ill term babies have higher mortality rates and much higher rates of long term disability than similar babies born in hospitals with NICU facilities. This paper details the Bush Babies Broadband project that aims to significantly improve the quality of treatment for babies born in rural, remote as well as urban areas by providing the first on-demand virtual NICU architecture in Australia. Real-time data collected from medical monitors and ventilators attached to the baby, audiovisual streams and static physiological data such as X-ray images are transmitted to the consulting Neonatologist to gain a better picture of the patient's condition than is currently available. The key contribution of this significant research is the infrastructure providing a mechanism for Neonatologists to receive information directly from a regional hospital, thereby preventing, in some cases, the immediate need to move the baby. A key benefit of this framework is that it is available to link regional hospitals with the supporting NICU Neonatologist ‘on demand’ eliminating the need to establish permanent point to point connections. This paper further describes the application of that architecture to a specific pilot connecting the Bathurst regional hospital with Neonatologists within the NICU at Nepean Hospital, Penrith Australia.     

磷酸酯淀粉在纯棉细特高密织物浆纱中的应用

就磷酸酯淀粉在纯棉细号高密织物中的上浆情况进行了试验，提出了具体浆纱工艺和减少织造断头率，提高织物效率及布面质量对策，实验表明，磷酸酯淀粉完全适应于纯绵细特高密织物的上浆要求。     

Long-chain fatty ammonium quaternaries in papermaking

A series of long-chain quaternary ammonium halogen esters (UKK-chemicals), quaternary dimethyl tallow epoxypropyl ammonium halogens (EPK1), quaternary ditallow methyl epoxypropyl ammonium halogens (EPK2), and EPK2 oligomers (EPK2P) were synthesized. At acidic, neutral, or slightly basic conditions, EPK1-, EPK2-, EPK2P-, and UKK-chemicals operate as cationic chemicals. They can be used, for example, as stock sizings, surface sizings, or fixatives. Stock sizing, surface sizing, and fixative experiments indicate that EPK1-, EPK2-, EPK2P-, and UKK-chemicals function at least as well as or better than the corresponding synthetic chemicals used in papermaking.     

Modeling flotation separation in a semi-batch process

A model for a semi-batch flotation separation process has been developed, based on available microprocess probabilities, and compared to experimental data obtained using a WEMCO laboratory flotation cell. In general, the model predicts the correct experimental trends. In many cases, the model also predicts removal efficiency very well. Parametric studies reveal that the model predictions are sensitive to a stability parameter, the turbulent energy density in the flotation cell, the contact angle between the solid particle and fluid, and the ratio of initial-to-critical film thickness.     

工程结构优化设计发展综述

 着重评述了工程结构优化设计研究领域从最初的尺寸优化发展到形状优化、拓扑优化的基本历程及其相关特点，并对优化设计选用的优化算法进行了归类，提出了这一领域今后仍然有待于发展的主要方面．