高真空扩散泵油275^#生产工艺改进

简述了高真空扩散泵油275^#的生产工艺,分析了水解釜材质和精馏系统存在的问题,提出了改造意见,并比较了改造效果。结果表明,将水解釜材质由搪瓷更换成不锈钢后,既节约原材料消耗,又减少水洗过程中的物料损失和排污量,从而大幅度降低了产品的生产成本;精馏系统装置经过改造后,产品中的三甲基五苯基三硅氧烷含量比改造前生产的产品高出15个百分点,提高到84%以上;且产能翻一番。     

一种高速大功率半导体脉冲激光电源的设计与仿真

主要分析了影响电容充放电类型高速大功率脉冲电源性能的主要因素 ,并运用SPICE对其特性进行仿真 ,介绍了一种基于高速大功率MOSFET管实现高速大功率半导体脉冲激光电源的方法     

Metal-carbonate formation from ammonia solution by addition of metal salts—An effective method for CO2 capture from landfill gas (LFG)

The absorption of CO₂ from LFG in different weight concentration ammonia solution and metal salts (Zinc and Barium) is investigated in this study. Addition of metal salts results in useful metal carbonates when LFG is passed through the solution. Barium salts show a better potential of removing CO₂ as compared to Zinc salts. Addition of Barium salts to ammonia solution results in a new absorbent as no study has been focused on it till date. Also metal salts are added to alkaline wastewater which not only decreases the pH of the wastewater but also useful metal carbonates are obtained from wastewater when LFG is passed through it. Different parameters like CO₂ loading, reaction rate and change in pH are investigated. Formation of carbonates is proved by using SEM and XRD analysis. Raman spectroscopy was performed on the discarded liquid after removal of carbonates to understand the formation of bicarbonates, carbonates and carbamates.     

MAX274/275有源滤波器的应用研究

介绍MAX274/275有源滤波器的特性及电路参数的设计和测控应用实例。     

千瓦级熔融碳酸盐燃料电池组

论述了千瓦级熔融碳酸盐燃料电池组制备及组装工艺中双极板组合件、高温粘结剂、隔膜原位制备、制紧力、热量管理等技术。采用高温粘结技术制备双极板组合件 ,并在电池组启动时原位制备隔膜。由 5 2个单电池串联组成的电池组在65 0℃操作温度 ,0 .5MPa压力下 ,最大输出功率达到 10 2 5 .48W。用此高温粘结技术与湿密封相结合 ,使电池组的操作压力可达到 0 .5MPa。     

QD10B-G2型1 000 kW燃气轮机发电车及其应用

北京电力公司,在全国电力系统中率先应用了当前最先进的燃气轮机发电技术,并设计定制了首台1 000 kW燃气轮机发电车.该型发电车的整体技术指标和性能、各项功能匹配、全部辅助设备等均达到了先进技术应用的完美结合,对今后电力系统的大功率发电车技术的应用和推广起到了很好的示范效果.文章介绍了首台1 000 kW燃气轮机发电车的结构特点,以及发电东的实际应用情况和技术发展方向.     

150kW备用发电机加热装置与自启动装置的技术改造

集宁供电分局使用的150 kW备用发电机为柴油发电机组,冬季低温使用时启动困难,而且启动后采用人工投入的方法,导致故障停电时间长,无法满足供电可靠性要求。为缩短故障停电时间,对150 kW备用发电机加装加热装置和自启动装置。实践证明,150 kW备用发电机加装加热装置和自启动装置后,耗油量小,启动速度快,降低了工作人员的工作量,应用效果良好。     

Modelling and management of smart microgrid for rural electrification in sub-saharan Africa: The case of Nigeria

Access to electricity is still a challenge in many parts of sub-Saharan Africa. In Nigeria, over 70% of the rural dwellers do not have access to electricity. The purpose of this paper is to examine the potential of a smart microgrid for off-grid rural electrification in Nigeria. A combination of design thinking and model-based design methodology is employed to select a suitable microgrid configuration and to develop a smart microgrid model. A system consisting of a solar photovoltaic array, battery energy storage and a diesel generator is selected, and the model is developed in Simulink. Demand data from 10 rural communities in Nigeria are used to validate the performance of the model and the potential for demand management is considered. The use of energy efficient light bulbs is found to reduce the peak electricity demand of the case study communities by 42 to 76%. Combining the proposed system with the use of LED bulbs makes the system to have 56 to 81% less net present cost than a system with a diesel generator alone and incandescent light bulbs. The proposed smart microgrid is found to be more suitable for off-grid rural electrification in Nigeria than diesel generators which are currently used for off-grid electrification in Nigeria.     

Stationary Fuel Cells at Work – An Interim Report

Different fuel cell systems, in various numbers, have been installed and run at customers' sites using natural gas. Operational results from these field tests are presented, which demonstrate that several fuel cell systems can be used successfully to generate heat and electricity. Improved reliability and cutting costs are the most urgent challenges for commercialisation.