A multigrid accelerated hybrid unstructured mesh method for 3D compressible turbulent flow

 A cell vertex finite volume method for the solution of steady compressible turbulent flow problems on unstructured hybrid meshes of tetrahedra, prisms, pyramids and hexahedra is described. These hybrid meshes are constructed by firstly discretising the computational domain using tetrahedral elements and then by merging certain tetrahedra. A one equation turbulence model is employed and the solution of the steady flow equations is obtained by explicit relaxation. The solution process is accelerated by the addition of a multigrid method, in which the coarse meshes are generated by agglomeration, and by parallelisation. The approach is shown to be effective for the simulation of a number of 3D flows of current practical interest. Sponsored by The Research Council of Norway, project number 125676/410 Dedicated to the memory of Prof. Mike Crisfield, a respected colleague     

可倾瓦径向气体轴承在低温透平机械中的应用

可倾瓦径向动压气体轴承以其良好的稳定性和自对中能力在低湿透乎机械中获得了广泛的应用。对可倾瓦径向气体轴承的工作原理和在低湿透乎机械中的应用发展情况进行了综述。     

AHMED experiments on hygroscopic and inert aerosol behaviour in LWR containment conditions: experimental results

Hygroscopic NaOH, CsI, CsOH and inert Ag aerosol behaviour at different temperatures and relative humidities (RH) has been studied in a well instrumented and controlled vessel of 1.81 m³ total free volume. Homogeneous thermal-hydraulic conditions for aerosol measurement in the vessel were achieved. The aerosol number and mass concentration were measured continuously during the experiments using a Condensation Nucleus Counter and a Tapered Element Oscillating Microbalance. The particle size distribution and chemical composition in the test conditions were measured by Berner low pressure impactors. In the case of NaOH the half life of the aerosol mass concentration was more than four times longer at low RH (22%) as compared to high RH (96%). The half lives of the CsOH and CsI aerosols were only twice as long at low RH as compared to high RH. Thus at high RH (96–97%) the half lives of CsOH and CsI were twice as long as the half life for the NaOH aerosol. The faster decay of the NaOH aerosol is due to the smaller density decrease of NaOH during water condensation. CsOH particles grew rapidly to their equilibrium size at all humidities. The measured equilibrium size for CsOH aerosol agree well with the calculated particle size at different RHs. Experimental results were also compared with calculations obtained by severe accident computer codes. These calculated results will be presented in a later paper.     

桥梁颤振气动导数识别的迭代法

本文提出一种利用自由振动响应通过年顿－拉夫逊迭代同时识别出桥梁全部8个颤振气动导的方法。此法具有对迭代初值要求不高，识别结果稳定的特点，并具有一定的抗噪声干扰能力。数字仿真与实物试验结果表明本文方法有效，可行。     

Characteristics of a typical lifting symmetric supercritical airfoil

The theoretical aerodynamic characteristics of a typical lifting symmetric supercritical airfoil demonstrating its superiority over thenaca 0012 airfoil from which it was derived are presented in this paper. Further, limited experimental results confirming the theoretical inference are also presented. Invited Lecture given at the 3rd Asian Congress on Fluid Mechanics, held in Tokyo during 1–5 September, 1986     

水平轴风力机的几个关键气动问题探讨

水平轴风力机是最有效的风能转换装置之一 ,在世界各地得到了广泛的应用。本文讨论了在风力机的研究和开发过程中所遇到的几个关键气动问题 ,在分析这些问题产生原因的基础上 ,介绍了目前的研究现状和研究水平。本文并结合问题所涉及的基本理论 ,以及学科发展的趋势 ,提出了解决问题的基本方法 ,以及发展方向和近期可望达到的目标等     

动载荷下应力强度因子的边界元计算

用Ｎａｒｄｉｎｉ－Ｂｒｅｂｂｉａ边界元法计算了动载荷下的应力强度因子，与解析解及有限元解相比较，效果较好。最后对计算结果进行了分析讨论。     

气体动压轴承动态参数测定原理

将气体动压轴压简化为转化气膜系统后，针对其动力特点，给出气膜在微幅振动下动压轴承的实用数学模型和测定动态参数的方法，并进行了测量误差的修正。     

静止和旋转孤立车轮局部流场的评价

为研究车轮周围流场特征,分别对某孤立车轮静止和旋转工况下周围流场进行数值研究,并给予试验验证.计算采用定常雷诺时均纳维斯托克斯方程.在1∶15的模型风洞中进行试验.数值模拟结果与试验数据吻合.针对数值模拟结果,详细分析静止和旋转孤立车轮周围流场的流动情况、表面压力因数、气动阻力因数和气动升力因数等,得到孤立车轮旋转对车轮附近局部流场的影响以及形成机理.车轮的转动使总体压差减小,降低气动阻力和升力,改善气动性能。