Superconductivity and magnetism in niobium doped YBa2Cu3O7 Related high Tc ceramics

Magnetic characterization has been performed on the members of the cuprateniobate RBa₂Cu₂NbO₈ (R = Pr, Nd, and La) series and R_1.5Ce_0.5Sr₂Cu₂NbO₁₀ (R = Pr, Eu, Nd, and Sm) series. The PrBCNO samples show a signature in the magnetization of a magnetic ordering at 12K. The PrCSCNO sample is nonsuperconducting and shows two distinct orderings at 17K and 53K. No such magnetic phase transition is observed down to 2K in the Nd and La based RBCNO materials or the Nd, Sm, and Eu based RCSCNO materials. Measurements of the lower critical field curve, dc irreversibility line, and critical curent densities are reported for each of the superconducting NdCSCNO, SmCSCNO, and EuCSCNO compounds.     

Performance of absorption refrigeration cycle at maximum cooling rate

The influence of irreversibility of finite-rate heat transfer on the performance of an absorption refrigerator is investigated using an endoreversible cycle model with continuous flow. The cooling rate is adopted as an objective function for refrigerator optimization. The maximum cooling rate and the corresponding coefficient of performance are derived. The optimal performance with respect to heat transfer areas of the refrigerator is analysed. In addition, certain significant conclusions are reached.     

Magnetic properties of high-temperature superconductors: Analysis within the framework of the impurity mechanism

The impurity mechanism proposed earlier is used to interpret the magnetic properties of hightemperature superconductors. The appearance of superconductive granules and the existence of weak bonds in grains of ceramics and in single crystals is explained. The irreversibility line is obtained and its new interpretation as the line of thresholds of appearance of infinite nonsuperconductive cluster is given. The relaxation time of the magnetic susceptibility in alternating magnetic fields is calculated. The decrease of the Meissner fraction with increase in magnetic field and decrease in doping, and other magnetic properties are explained.     

关于超耐候性BA01—02钛白粉的研制

采用高温淬火方法制备了Ｔｃ在２７．４Ｋ至９２．４Ｋ之间的一组不同氧含量的ＰＭＰ（粉末熔融工艺）法ＹＢＣＯ超导体。通过对这些超导体样品的磁滞回线及不可逆线的研究发现，随着氧空位的增加，超导体的磁通钉扎力减小     

Abstract Models of Storage

This note is a historical survey of Christopher Strachey's influence on the development of semantic models of assignment and storage management in procedural languages.     

零边界条件下二维元胞自动机矩阵可逆性分析

该文介绍了二维元胞自动机的典型邻域结构,对多状态二维元胞自动机的矩阵描述进行了拓展.通过对零边界条件下元胞自动机的状态转移矩阵的块矩阵的分析,得出矩阵的可逆性与元胞自动机冯诺依曼型邻域之间的联系.     

不可逆回热式玻色布雷顿制冷循环性能分析

基于玻色气体的热力学性质和回热式布雷顿制冷循环的不可逆模型,导出循环的一些重要性能参数,如循环的制冷量、回热量、输入功和性能系数的一般表达式。通过数值计算获得了循环的一些重要的性能特性曲线,分析了循环的不可逆性和回热特性对玻色布雷顿制冷机性能的影响。     

分级抽汽回热式太阳能低温有机朗肯循环系统的热力性能分析

研究了分级抽汽回热式太阳能低温有机朗肯循环系统的热力性能。以R600和R245fa作为循环工质,利用热力学第一定律和第二定律,在不同的蒸发温度和膨胀比的条件下,对分级抽汽回热式系统和基本有机朗肯循环系统的热力性能变化进行比较和分析,指出分级抽汽回热式系统的热效率和效率更高,产生的不可逆损失更小,具有更优越的性能。     

基于双区模型的汽油机燃烧过程可用能及不可逆损失分析

为考察汽油机燃烧过程中的能量转化规律,建立了汽油机燃烧过程的热力学双区模型,考虑了可用能变化及不可逆损失.求解了燃烧期间缸内压力及温度随曲轴转角的变化规律、缸内工质可用能及不可逆损失的变化规律,分析了未燃区和已燃区的可用能以及与放热规律的关系.工质可用能转化包括对外做功、传热转移可用能和可用能损失3部分,燃烧结束时,工质总可用能占燃烧初始总可用能的比例约为47.0%.在整个燃烧阶段,燃烧可用能损失约为18.4%,由于向缸壁传热造成的可用能损失约为12.3%.缩短燃烧持续期和适当推后着火有利于降低燃烧过程可用能不可逆损失.     

Exergy analysis of ejector‐refrigeration cycle using water as working fluid

Exergy is based on the second law of thermodynamics and is the only rational basis for evaluating the system performance. The aim of this paper is to study in detail the irreversibilities in the steam‐ejector refrigeration system. The influence of the cycle parameters is analysed on the basis of the first and second law and the results indicated the components with the greater irreversibility. A better quality of the ejector has more effect on the system performance than the better quality of other components, because the ejector at first and the condenser at second have the greater exergy loss of the system. For the refrigeration system the maximum coefficient of performance varying between 0.4 to 0.6 and the second law efficiency remains close to 0.17 for generator pressure 6 bar, condenser temperature 44–50°C and evaporator temperature 4–8°C. Also the study showed that the second law analysis quantitatively visualizes losses within a system and gives clear trends for optimization. Copyright © 2005 John Wiley & Sons, Ltd.