The role of microbial electrogenesis in regulating methane and nitrous oxide emissions from constructed wetland-microbial fuel cell

This study assesses a sustainable solution to greenhouse gases (GHGs) mitigation using constructed wetland-microbial fuel cells (CW-MFC). Roots of wetland plant Acorus Calamus L. are placed in biological anode to better enable anode microorganisms to obtain rhizosphere secretion for power improvement. Three selected cathode materials have a large difference in GHG emissions, and among them, carbon fiber felt (CFF) shows the lowest emissions of methane and nitrous oxide, which are 0.77 ± 0.04 mg/(m²·h) and 130.78 ± 13.08 μg/(m²·h), respectively. The CFF CW-MFC achieves the maximum power density of 2.99 W/m³. As the influent pH value is adjusted from acidic to alkaline, the GHGs emissions are reduced. The addition of Ni inhibits GHGs emission but decreases the electricity, the power density is reduced to 1.09 W/m³, and the methane and nitrous oxide emission fluxes decline to 0.20 ± 0.04 mg/(m²·h) and 15.49 ± 1.86 μg/(m²·h), respectively. Low C/N ratio reduces methane emission, while high C/N ratio effectively inhibits nitrous oxide emission. At the influent pH 8 and C/N = 5:1, the methane emission flux is approximately 10.60 ± 0.27 mg/(m²·h), and the nitrous oxide emission flux is only 10.90 ± 1.10 μg/(m²·h). Based on the above experimental results by controlling variable factors, it is proposed that CW-MFC offers an environment-friendly solution to regulate GHG emissions.     

Design Methodology and Area Sensitivity Analysis of Horizontal Subsurface Flow Constructed Wetlands

An approach is presented to satisfy the demand for simple criteria, guidelines and models for the preliminary sizing of horizontal subsurface flow (SF) constructed wetland systems. This approach eliminates time-consuming calculations and iterations by providing graphical solutions for wetland system sizing. Therefore, it can be used for the preliminary assessment of new or performance evaluation of existing subsurface flow constructed wetland systems. The validity of this methodology is checked with data from existing systems and is found to be quite satisfactory. This methodology is combined with simple equations predicting the maximum wetland capacity in summer, so as to assist designers in sizing installations in tourist areas with increased summer populations. Furthermore, based on this methodology, a sensitivity analysis is performed of the area requirements for wastewaters of various strengths and various design conditions and performance criteria. The results provide a useful overview to engineers and further simplify the design methodology of new subsurface flow constructed wetland systems.     

基于ANSYS有限元分析深水墩施工技术研究

介绍了丹江口二桥深水墩基础施工平台的设计，重点介绍利用ANSYS通用有限元程序对施工平台的施工过模拟分析，以及对分析结果的总结。     

Elastoplastic modelling of subsurface crack growth in rail/wheel contact problems

Propagation of small subsurface cracks subjected to shear under repeated rolling contact load is studied. An analytical crack model (Dugdale) with plastic strips at the two crack tips is employed. Compressive stresses promoting crack closure and friction between crack faces are considered. The triaxial stress state is used in the yield criterion. A damage criterion is suggested based on experimental LCF data. In a numerical study, critical crack lengths are found below which propagation of an existing crack should be effectively suppressed.     

Geospatial technology applied to spatiotemporal assessment of Harike Wetland,Punjab

The Harike Wetland situated in Punjab is a Ramsar site and a wetland of national importance. The present study was undertaken to assess the spatiotemporal dynamics of the wetland on the basis of geospatial technology and ground‐based studies. Landsat images for the years 2002 and 2014 were acquired from the United States Geological Survey and classified digitally to generate landuse/land cover maps involving four classes (water, grassland (including water hyacinth), agriculture, built‐up (settlement), barren land). The total area of the Harike Wetland was found to be 8023.68 ha. Water sampling at eleven sites was carried out and evaluated for physicochemical parameters. The water quality at several sampling points was found to be severely degraded. Change detection analysis revealed the submerged area (area under water) and grassland (including water hyacinth) had decreased over the past 12 years, whereas that area under agriculture and built‐up land has increased, indicating a shrinkage in the total wetland area. The present study also indicated that the near‐infrared band is a good indicator of water quality parameters, as indicated by the significant positive correlation between the near‐infrared band and relevant water parameters. Because the wetland is important from both an ecological perspective and economic perspective, regular monitoring is recommended, for which geospatial technology has proven to be very useful.     

Surface and subsurface products of the interaction of O2 with Ag under catalytic conditions

Polycrystalline Ag treated with O₂ at pressures up to 1 bar and at temperatures up to 920 K was examined by TDS. It was found that the peak commonly observed at 595±25 K and assigned to adsorbed atomic oxygen (O_a) is shifted to higher desorption temperatures with rising dosing temperatures. Since saturation of the uptake was not possible either, this peak was identified as dissolved atomic oxygen (O_d). The existence of a maximum for the O₂ uptake after exposure at 820 K was found. Hence, under conditions of formaldehyde synthesis ( 920 K) the ability of the catalyst to dissolve oxygen is near its maximum.     

Diamond growth by carbon ion implantation of diamond

Medium energy (5–25 keV) ¹³C⁺ ion implantation into diamond (100) to a fluence ranging from 10¹⁶ cm⁻² to 10¹⁸ cm⁻² was performed for the study of diamond growth via the approach of ion beam implantation. The samples were characterized with Rutherford backscattering/channelling spectroscopy, Raman spectroscopy, X-ray photoemission spectroscopy and Auger electron spectroscopy. Extended defects are formed in the cascade collision volume during bombardment at high temperatures. Carbon incorporation indeed induces a volume growth but the diamond (100) samples receiving a fluence of 4 × 10¹⁷ to 2 × 10¹⁸ at. cm⁻² (with a dose rate of 5 × 10¹⁵ at. cm⁻² s⁻¹ at 5 to 25 keV and 800 °C) showed no He-ion channelling. Common to these samples is that the top surface layer of a few nanometers has a substantial amount of graphite which can be removed by chemical etching. The rest of the grown layer is polycrystalline diamond with a very high density of extended defects.     

重金属在宽叶香蒲人工湿地系统中的分布与积累

本文通过对广东韶关凡口宽叶香蒲（Typha latifolia)人工湿地系统的进出水口，土壤剖面及四种优势植物体各部分器官中Pb,Zn,Cu和Cd含量进行分析。结果表明；重金属主要库存于土壤中。从水平上看，全量的重金属含量从进水口到出水口呈上升趋势，而有效态则相反；从土壤剖面的垂直分布上看，全量和有效态重金属含量都随土壤深度的增加而递减，四种植物都具有较强的吸收和富集重金属的能力，且主要富集在植物的地下部分。     

山东南四湖湿地生物多样性及保护措施

南四湖湿地由湖泊、沼泽湿地和人工湿地构成,生物多样性十分丰富。其湿地生态系统具有生境脆弱性、物种多样性、生物稀有性、生态自然性等特点,是我国华北平原最大的具有良好湿地植被的天然湿地生态系统,同时也是众多候鸟的越冬地、繁殖区及迁徙必经的中转站。分析了湿地生物多样性现状及保护中存在的主要问题,提出了相应的湿地保护措施。     

大庆及周边地区湿地萎缩及地下水现状分析

大庆及周边地区的湿地主要分布在齐齐哈尔市区、大庆市区、杜蒙县、肇源县、肇东市、安达市等,现呈逐年萎缩的趋势,其中有其自然因素和人为因素的影响。仅2005~2007年就有5.96×104hm2湿地退化,并且湿地内的地下水也呈现出相应的变化。论述了大庆及周边地区湿地的萎缩情况,并且以3个典型湿地为例进行了湿地内地下水现状分析。