Calcium phosphates grown on bacterial cellulose template

Bacterial cellulose membranes were employed as templates for calcium phosphates deposition by successive immersion in solutions of Ca(NO₃)₂·4H₂O and (NH₄)₂HPO₄, under ultrasonication. During the wet chemical reaction, mineral phases were loaded on bacterial cellulose fibrils, leading to precursor hybrid composites. These were subjected to a lyophilisation procedure in order to preserve the 3D porous aspect and afterwards to a thermal treatment with the aim of removing the polymeric phase and generating well crystallized structures. Different types of morphologies were achieved by varying the heating rate, as well as the calcination temperature and period. The as-prepared samples and the final ones were investigated from compositional and structural point of view through X-ray diffraction and Fourier-transform infrared spectroscopy and morphologically concerning by scanning electron microscopy. The magnetic properties were also evaluated in order to demonstrate the suitability of the obtained materials for the development of magnetic scaffolds dedicated to hard tissue applications.     

稠油微生物开采技术现状及进展

综述了用微生物方法开采稠油的技术现状与进展，论题如下。①概述。②基本方法：异源微生物采油，包括微生物吞吐和微生物驱；本源微生物采油压大港孔店油田的实例。③主要机理，包括产表面活性剂，降解稠油中重质组分及其他。④技术研究，包括机理性、可行性及经济效益研究，列举了国内外6个实例。⑤现场应用，包括国外1个、国内6个实例。⑥该技术的优势及问题。参22。     

低温脂肪酶产生菌的筛选、鉴定及其部分酶学性质

从南极乔治王岛冻土来源的76株低温细菌中筛选到13株低温脂肪酶产生菌，对其中的BTsl0022菌株进行鉴定。通过生理生化特征、16s rDNA基因序列的同源性和系统发育分析发现，菌株RTsl0022属于假单胞菌属(Pseudomonas)，但与已定名的假单胞菌有一定的差异，与未定名的Pseudomonas sp．PsB的亲缘关系最接近，故将其暂定名为Pseudomonas sp．BTsl0022。对该菌脂肪酶的酶学性质初步研究表明，酶的最适作用温度为24℃，对热敏感，60℃处理30min仅残留25％酶活性，酶的适宜作用pH范围在7．0～9．0，最适pH为8．0。     

Random errors caused by temperature in magnitude of principal strains evaluated ith 3-element strain gauge rosettes

The effects of the uncertainties associated ith the apparent strain and gauge factor data, given by the manufacturer, in the evaluation of principal strains are examined. Principal strains are obtained by a reduction of the strains measured ith electrical resistance strain gauge rectangular or delta rosettes. The theoretical analysis points out the relevance of the effects caused.     

Probing nanomechanical properties of nickel coated bacteria by nanoindentation

As a powerful method for the study of mechanical properties at micro-/nanoscale, nanoindentation was applied to measure the hardness and elastic modulus of bacteria-templated metallic nanomaterials for the first time. Based on the morphological characterization by Atomic Force Microscopy (AFM) and Transmission Electron Microscopy (TEM), nanoindentation testing results showed that after coating with nickel via electroless chemical plating, the elastic modulus and hardness of bacterial cells were increased about 17 times and 50 times, respectively, indicating a great improvement in mechanical properties. This study would lay a forceful mechanical foundation for a better and general understanding of this kind of biotemplated metallic nanomaterials, which showed potential applications in nanoelectronics, nanomagnetism and nanomechanics.     

Thermomechanical Models of Irreversible Finite Deformation of Anisotropic Solids

The proposed models for irreversible finite deformation of initially anisotropic solids are based on the hypothesis of the parameters of state, for which the authors have chosen a universal parameter (temperature) and a strain component, which is analogous to volume strains in an isotropic body and represents thermal strains of an unconstrained (stress-free) anisotropic solid. The application of this hypothesis allows the strain tensor to be resolved into a reversible and irreversible components. For irreversible processes of finite deformation of hardenable materials, the authors have proposed a deformation-type model, which makes it possible to describe a change in the type of anisotropy of initially anisotropic materials in the course of deformation. For the flow-theory-type model, the limiting state function, as given in the space of irreversible strains, allows for the experimentally observed plastic flow of anisotropic crystals under the action of hydrostatic pressure only.     

Current and emerging molecular diagnostic technologies applicable to bacterial food safety

There is an increasing need for rapid test methods to certify the quality and safety of food products. Current tests applied for the microbiological assessment of food products are based on standard approved culture-based isolation methods and can take several days to yield results. Nucleic acid diagnostic (NAD) tests for the identification of bacterial foodborne pathogens employing in vitro amplification technologies are capable of sensitive and specific detection of single or multiple pathogens in foods in a shorter timeframe than traditional methods. New developments in molecular biosensors have the potential to provide at-line bioanalysis, whereas microarray-based technologies may in the future be the NAD platforms of choice for multiple pathogen detection and identification. This article reviews current and emerging NAD platforms for foodborne bacterial pathogens that have the potential to impact food safety.     

Correlation study between standard plate count and flow cytometry for determination of raw milk total bacterial count

Milk samples were collected in the dry season ( n =  155) and in the rainy season ( n =  68) to establish a correlation between electronic flow cytometry and standard plate count for the determination of total bacterial count of raw milk. Results were expressed in individual bacterial count (ibc) and colony forming unit (cfu) for electronic flow cytometry (Bactocount) and standard plate count, respectively. The accuracy of Bactocount, denoted by the residual standard deviation ( s ( y,x )), was 0.309 log cfu/mL. The predictive interval of estimated values was broad and it is suggested that total bacterial count should be expressed in ibc without transformation to cfu.     

Psychrotrophic violacein-producing bacteria isolated from Lake Winnipeg,Canada

Violet and purple bacterial pigmentations are uncommon when considering strict aerobes. Here we report discovery of two novel isolates, P102 and P117 from the freshwater Lake Winnipeg, each with violet to deep purple colony colouration. The relationship between pigment production and growth was investigated under different conditions, including a variety of carbon sources, pH, and temperatures. The violet compounds were purified using polar organic solvents, and then structurally characterized via mass spectrometry and nuclear magnetic resonance to be violacein and deoxyviolacein. Strain P117 produced higher concentrations of the darker pigment deoxyviolacein, which resulted in a deeper hue of violet than in cultures of P102. Strain P102, synthesized violacein maximally in liquid rich organic medium at pH 8 and 20 °C, and had 99.3% sequence similarity to the 16S rDNA from Janthinobacterium lividum. Strain P117, related to Massilia violaceinigra sharing 99.2% 16S rDNA sequence similarity, also produced violacein at similar optimal conditions, but developed higher concentrations of pigment at 15 °C. Culture-based methods found that violacein producers composed 0.001% or 0.023% CFU of environmental heterotrophic populations using BG-11 and potato-based media, respectively. Culture-independent high-throughput ribosomal 16S V4 sequencing of environmental DNA was used to detect Gram-negative species known for their production of violacein. Of all bacterial and archaeal sequences present during the fall in littoral waters and sediment of Lake Winnipeg, 5.5% and 6.3%, respectively, belonged to species that have similar pigment, demonstrating the scarcity of violacein producers in this aquatic freshwater system.