Fully solution-processed and multilayer blue organic light-emitting diodes based on efficient small molecule emissive layer and intergrated interlayer optimization

Efficient and fully solution-processed blue organic light-emitting diodes (OLEDs) based on fluorescent small-molecule and methanol/water soluble conjugated polymer as electron-injection material are reported. The emitting layer is 3,6-bis(9,9,9′,9′-tetrakis (6-(9H-carbazol-9-yl)hexyl)-9H,9′H-[2,2′-bifluoren]-7-yl)dib-nzo[b, d]thiophene 5, 5-dioxide (OCSoC) with a blue-fluorescent small-molecule, and a methanol/water soluble polymer poly[(9,9-bis(30-(N,N-dimethylamino)propyl)-2,7-fluorene)-alt-2,7-(9,9-dioctyl-fluorene)] (PFN) acted as electron-injection layer (EIL). All the organic layers are spin-coated from solution. The multilayer device structure with emitting layer/electron-injection layer is achieved by solution-processed method without the dissolution problem between layers. The performances of the devices show that the maximum luminous efficiency of the multilayer device is increased about 43%, compared to the single-layer device. PFN acting as the EIL material plays a key role in the improvement of the device performance when used in solution-processed small-molecule OLEDs.     

联合法制备VBL萤光增白剂－砍两头新工艺

将ＤＳＤ酸生产中还原反应并经中和过滤后的清液直接用于ＶＢＬ萤光增白剂生产，获得满意的效果。     

Development of a fast neutron radiography converter using wavelength-shifting fibers

A fluorescent converter for fast neutron radiography (FNR) comprising a scintillator and hydrogen-rich resin has been developed and applied to electronic imaging. The rate of the reaction between fast neutrons and the converter is increased by thickening the converter, but its opaqueness attenuates emitted light photons before they reach its surface. To improve the luminosity of a fluorescent converter for FNR, a novel type of converter was designed in which wavelength-shifting fibers were adopted to transport radiated light to the observation end face. The performance of the converter was compared with that of a polypropylene-based fluorescent converter in an experiment conducted at the fast-neutron-source reactor YAYOI in the University of Tokyo.     

VFD GU384x32L-3900模块特性及应用

GU384x32L-3900是一款内藏驱动电路的、384×32点阵式VFD显示模块。介绍了GU384x32L-3900模块的基本结构及软件编程、硬件应用等特性并探讨了其在实际中的应用。     

小剂量辐照小鼠胸腺细胞膜流动性的变化

报道了以茈为荧光探针,探讨小剂量~(60)Co γ射线照射后小鼠胸腺细胞膜流动性的变化。结果表明,剂量在0.25-1.00Gy范围,胸腺细胞膜流动性降低与剂量之间呈明显线性关系。从0.50Gy起,辐照组荧光强度比值I_1/I_2与I_3/I_2与对照组的比较存有显著差异(P<0.05)。提示淋巴细胞膜流动性的变化可作为小剂量辐照早期效应的敏感指标。     

Improvement of photon collection in Cu(In,Ga)Se2 solar cells and modules by fluorescent frequency conversion

Fluorescent photon down conversion for the improvement of the blue response of ZnO/CdS/Cu(In,Ga)Se₂ heterojunction solar cells and modules is investigated. Fluorescent dyes of the series Lumogen® F are analyzed by optical transmission and reflection as well as by photoluminescence measurements. A spectral transfer matrix formalism is introduced that allows to predict the suitability of a luminescent dye as a down-converter for a given solar cell from its absorption/emission properties. We find that Lumogen® F Violet 570 and Lumogen® F Yellow 083 as well as a combination of both yields improvements for Cu(In,Ga)Se₂ solar modules. Particularly, we find that the short circuit current density of a Cu(In,Ga)Se₂ mini-module is improved by 1.5 mA cm^− 2 when applying a varnish with a combination of Lumogen® F Violet and Yellow. About 0.5 mA cm^− 2 of this improvement is due to a reduced overall reflectance and an improvement of 1 mA cm^− 2 results from the frequency conversion by the dyes.     

高灵敏度荧光显微镜及其在细胞光敏效应研究中的应用

研制了一种可探测极微弱细胞荧光图象的高灵敏度荧光显微镜，在仪器中使用了一个高质量的亮度增益为５０，０００的象增强器对细胞的荧光图象进行光能量放大，因而这种荧光显微镜可探测到普通荧光显微镜不能观察的微弱荧光图象。由于仪器中光源的输出强度很小，避免了长时间观察对活细胞的光损伤，并可观察到荧光效率低的荧光物质的分布图象。探测系统中用计算机采集图象数据，同时对数据进行必要处理，以提高图象的质量。这种高灵敏度的荧光显微镜可用于分析细胞中荧光物质的分布，以及细胞动态生理过程的研究。使用此仪器已直接观察到光敏竹红菌甲素在Ｈｅｌａ细胞（人体宫颈癌细胞）中的分布，细胞受光照射后的光损伤现象及加入三种细胞保护剂后获得不同程度保护的细胞状态。     

Fluorescent lamp promoted formaldehyde removal over CeO2 catalysts at ambient temperature

Exploring an alternative strategy with high efficiency and low cost to abate formaldehyde (HCHO) in indoor environment, is of increasing significance for people's health. CeO₂ catalysts prepared by hydrothermal, precipitation and calcination methods were investigated for HCHO removal at ambient temperature. It is found that indoor fluorescent light visibly boosts the catalytic performance of CeO₂ catalysts for HCHO decomposition at ambient temperature. Among the CeO₂ catalysts, CeO₂ prepared from hydrothermal method (CeO₂–H) exhibits a superior catalytic performance and an excellent durability by eight recycle times. Based on the characterization and analysis, the excellent catalytic performance of CeO₂–H is mainly contributed by its abundance of surface oxygen vacancies, and photogenerated electrons and hole activated by fluorescent light. This work shows a potential practicability in HCHO pollution elimination by taking full advantage of the existing lighting in indoor environments.     

化学镀Ni-Cu-P添加剂的研究

通过对化学镀Ni-Cu-P合金的稳定剂、表面活性剂、光亮剂对镀层性能及镀液稳定性的影响研究，得出最佳实验配方。     

Fluorescent Brightener 28 Removal by Ozonation or Advanced Oxidation Processes (O3/H2O2)

The aim of this work is to study the reaction of ozone and combined ozone/hydrogen peroxide mixtures with the fluorescent brightener 28 in dilute aqueous solution using controlled experimental conditions. The kinetics were also evaluated under various experimental conditions. The main ozonation by-products have been identified by High Pressure Anionic Exchange Chromatography (HPAEC) and Gas Chromatography coupled with Mass Spectrometry (GC-MS) techniques and a reaction pathway is proposed. In order to confirm this mechanism, melamine and s-triazine have been treated under the same reaction conditions and their decomposition pathways were studied.