Effect of Wall Surface Properties at Different Drying Kinetics on the Deposition Problem in Spray Drying

Current methods in alleviating the wall deposition problem in spray drying emphasize mainly controlling the stickiness of the drying particles and less attention is placed on the properties of the dryer wall. In this experimental study, the effect of wall surface properties on the deposition mechanism has been investigated. Properties considered in classifying different wall materials were surface energy, roughness, and dielectric properties. The model solution contained sucrose, representing low-molecular-weight sugars commonly encountered in spray drying of fruit and vegetable juices. The effect of wall properties on deposition was explored at different drying rates producing particles of different surface rigidity. Larger surface roughness produced higher deposition fluxes for particles with high impact velocity and moisture. Surface energy and surface roughness were found to have no significant effect for dry rigid particles at the middle and bottom elevation of the drying chamber. However, material with lower surface energy (Teflon) exhibited less deposition for rubbery particles at such elevations. Analysis shows that dielectric wall material (Teflon) tends to enhance deposition of dry particles because of attrition at the surface. Higher wall temperature was found to produce slightly more deposition. The results of this work give a general indication of the effect of wall material on the deposition problem and provide the fundamental understanding for further studies along this line. Proper selection of dryer wall material will provide potential alternatives for reducing the deposition problem.     

酶法提取树莓汁的研究

本试验以澳洲红、早红、美国22三个品种树莓为原料，通过不同的酶处理方法来制原果汁，优选适于制汁的品种和酶处理方法。     

Modeling Condensation and Evaporation on Fruit Surface

Rewarming of fruits and vegetables after cooling is characterized by heat and mass transfer processes, which leads commonly to condensation of water on the produce surface at temperatures below the dew point. This effect may affect the produce quality due to microbial growth at unfavorable environmental conditions. The amount of condensed water is a function of the produce surface temperature and of the surrounding conditions as air temperature, air humidity, and air flow. Under practical conditions, both the warming and the condensation are strongly affected by the packaging system used. Depending on the flow conditions close to the produce surface, parameters of heat and mass transfer under laboratory conditions were measured. A mathematical model was developed for the determination of the amount of condensed water on fruit surfaces, its reevaporation, and its total dwell time dependent on the environment air conditions. The model describes the heat and mass transfer processes on single fruits. The process of diffusion of humidity in air and proceed of surface temperature is the basis for the model.     

European intercomparison on electron spin resonance identification of irradiated foodstuffs

The results of a co-trial organized by the Community Bureau of Reference on the use of Electron Spin Resonance spectroscopy for the identification of irradiated food in 21 laboratories are presented. The trial was qualitative on beef and trout bones, sardine scales, pistachio nut shells, dried grapes, and papaya, and quantitative on poultry bones. There was no difficulty in identifying irradiated meat bones, dried grapes, and papaya. In the case of fish bones there is a need for further kinetic study on different species. Identification of irradiation in pistachio nuts is more complicated and additional research is needed before further trials. All laboratories were able to distinguish between chicken bones irradiated at 1 to 3 kGy or 7 to 10 kGy although there was a partial overlap between the results.     

Results from the monitoring of pesticide residues in fruit and vegetables on the Danish market, 2000-01

To check compliance with the maximum residue levels in foods and to monitor the residue levels to enable an evaluation of the exposure of the Danish population to pesticides, a monitoring programme for pesticides residues in fruit and vegetables was performed. Sampling plans were designed based on previous findings and on consumption data. Samples (n = 4404) of mainly fresh conventionally and organically grown fruit and vegetables were collected at wholesalers and importers and at food processing companies. Of the samples, 3% were frozen products and 5% organically grown. Of the samples, 34% were of Danish origin, with 66% from other countries. Two accredited laboratories performed analyses of the samples using capillary gas chromatography, liquid chromatography and a spectrophotometric method. Reporting levels were set at the lowest calibration level or at the limit of determination. Residues were found in 60% of the samples of fruit but in only 18% of the vegetable samples. Residues above the maximum residue levels were found in 6% of all samples of fruit and in 2% of the vegetable samples.     

Effect of Rare Earth Elements on the Induction Frequency of the Somatic Cell Embryo in The Fruit of Chinese Wolfoerry

ＥｆｆｅｃｔｏｆＲａｒｅＥａｒｔｈＥｌｅｍｅｎｔｓｏｎｔｈｅＩｎｄｕｃｔｉｏｎＦｒｅｑｕｅｎｃｙｏｆｔｈｅＳｏｍａｔｉｃＣｅｌｌＥｍｂｒｙｏｉｎＴｈｅＦｒｕｉｔｏｆＣｈｉｎｅｓｅＷｏｌｆｏｅｒｒｙＹａｎｇＨａｎ－Ｍｉｎ（杨汉民）；ＤｕＬｉｎ（杜琳）（...     

Enzymatic Firming of Processed Red Pepper by Means of Exogenous Pectinesterase

The objective of this investigation was to demonstrate that the firmness of a commercial vegetable product, diced and frozen red pepper (Capsicum annum var. Sendt), could be improved by the use of exogenous pectinesterase in an industrially relevant process. The diced pepper pieces 10 × 10 × 7 mm³ were infused under vacuum with a commercially available pectinesterase. The range of optimal process conditions was: 15-20°C, 45 min infusion time, a 10-25 mM CaCl₂ infusion brine, a w/w ratio of pepper fruit to infusion brine of 1.5:1, and an enzyme dosage of 30-60 pectinesterase units (PEU) per kg pepper fruit. The firmness as measured by back extrusion was improved by a factor of two to three. The effect of firming was robust and conserved after freezing and heating in a simulated household cooking process. The firming process seems easily adaptable to industrial conditions and may be applicable to other vegetable and fruit products.     

An improved fruit fly optimization algorithm for solving the multidimensional knapsack problem

This paper presents an improved fruit fly optimization algorithm (IFFOA) for solving the multidimensional knapsack problem (MKP). In IFFOA, the parallel search is employed to balance exploitation and exploration. To make full use of swarm intelligence, a modified harmony search algorithm (MHS) is proposed and applied to add cooperation among swarms in IFFOA. In MHS, novel pitch adjustment scheme and random selection rule are developed by considering specific characters of MKP and FOA. Moreover, a vertical crossover is designed to guide stagnant dimensions out of local optima and further improve the performance. Extensive numerical simulations are conducted and comparisons with other state-of-the-art algorithms verify that the proposed algorithm is an effective alternative for solving the MKP.