超高分子量聚乙烯的辐照效应

通过密度测定和ＤＳＣ热分析，观测了超高分子量聚乙烯的辐射效应。实验结果表明：在吸收剂量０—１．１３ＭＧｙ范围内，密度随吸收剂量的增加而增大，熔化热和熔点也有所增加，特别是在低剂量范围内增加十分明显。以上结果都说明，超高分子量聚乙烯在辐照过程中，结晶在完善或有新的结晶形成     

Development of an Enzymic Time Temperature Integrator for Sterilization Processes Based on Bacillus licheniformis α-amylase at Reduced Water Content

ABSTRACT: The thermal stability of Bacillus licheniformis α-amylase at low moisture content was studied, based on isothermal experiments performed in a temperature range 113 to 125 °C. The thermal inactivation was monitored by measuring the decrease in thermal denaturation enthalpy and/or the decrease in enzymic activity on pnitrophenyl-α-D-maltoheptaoside, or on starch as a substrate. Based on enthalpy readings, an enzymic system with a z-value of 10.4 °C was observed when using a relative humidity of 81% at 4 °C. A theoretical study showed that this system could be used as a Time Temperature Integrator (TTI) to monitor the safety of sterilization processes of numerous food products.     

High-pressure dc sputtering of High-Tc BPSCCO thin films withTc(0) above 100 K

High-T _c Bi(Pb)-Sr-Ca-Cu-O thin films have been made on single-crystal MgO substrates using high-pressure dc sputtering technique. X-ray studies confirm the crystallinity and highly oriented structure withc-axis perpendicular to the substrate. By optimizing the annealing schedule the formation of the high-T _c phase is stabilized. The best film exhibited superconducting transition temperature with zero-resistance temperature,T _c(0), as high as 101 K. Temperature dependence ofJ _c indicates the presence of Josephson-type weak links.     

GC/MS characterization of mate tea leaves extracts obtained from high-pressure CO2 extraction

This work presents a study concerning the chemical characteristics and analytical separation process of the essential oil obtained from high-pressure carbon dioxide extraction of Ilex paraguariensis. The experiments were performed in a laboratory-scale unit in the temperature range of 20–40 °C, from 100 to 250 bar. A blend of the I. paraguariensis extracts was percolated through a preparative chromatographic column, containing silica gel, and successively eluted with 150 mL of each of the following solvents: hexane, toluene, dichloromethane, ethyl acetate, acetone and methanol. The raw extract and its fractions were analyzed by gas chromatography coupled to mass spectrometry detection (GC/MS). The fractionation procedure showed to be a good clean up technique due to the isolation of different classes of compounds in each fraction. Chromatographic analyses allowed the identification of caffeine, fatty acids and esters, phytol, squalene, Vitamin E, stigmasterol derivatives and saturated hydrocarbons.     

Immobilized α-amylase from Bacillus licheniformis: a potential enzymic time—temperature integrator for thermal processing

Biphasic and nth-order models were tested as to their usefulness to fit experimental inactivation data of Bacillus licheniformis α-amylase, immobilized on glass beads, and were discussed with respect to their suitability to characterize the considered enzymic system as a time—temperature integrator (TTI) to evaluate heat processes. Both isothermal and non-isothermal inactivation experiments were carried out. Model (kinetic) parameters (rate constant k, activation energy E_A and reaction order n) were estimated using a non-linear regression procedure. The results obtained, especially the activation energy of about 293 kJ mole^–1, indicated a potential use of this system as a TTI for heating processes in the temperature range of 96–108°C.     

Expressing the equivalence of non‐isothermal and isothermal heat sterilization processes

Currently, the sterility of heat‐processed food and pharmaceuticals is assessed in terms of an F₀ value, based on the equivalence of the heat treatment to an isothermal process at a reference temperature. This F₀ value, however, has a meaning if, and only if, the inactivation kinetics of the targeted spores (or cells) follow a first‐order relationship and the temperature dependence of the D value, the reciprocal of the rate constant, is log‐linear. There is growing evidence that these conditions are not satisfied by many spores, including those of Clostridium botulinum and vegetative cells. Consequently, a replacement for the F₀ value is proposed in the form of a momentary equivalent time at the reference temperature based on the actual survival pattern of the spores, which need not be log‐linear. This equivalent time can be calculated together with the theoretical survival ratio in real time, thus enabling an operator to monitor the lethality of ongoing industrial heat processes. The concept is demonstrated with published survival data of C. botulinum, for which the Weibullian and log‐logistic models served as primary and secondary models, respectively. The safety factor according to the proposed method is in the number of added minutes of processing, beyond the theoretical time needed to reduce the survival ratio of the targeted spores or cells to a level that would produce practical (or commercial) sterility. Copyright © 2006 Society of Chemical Industry     

Improving antibacterial,biocompatible, and reusable properties of polyvinyl chloride via the addition of aluminum alkoxides

Global bacterial infections associated with conventional polyvinyl chloride (PVC) medical devices place a heavy burden on healthcare systems and thus it will be desirable if medical devices are made from antimicrobial PVC. There are numerous studies focusing on polymer surface modifications to either leach antimicrobial agents or kill pathogenic microbes upon direct contact. In this work, mannitol fumarate ester-based aluminum metal alkoxide (MFE-Al) additive was developed to confer simultaneously improved antibacterial property and enhanced high temperature sterilization resistance of the resultant PVC. Data obtained confirm that the MFE-Al stabilized PVC sheets significantly inhibit 98% bacterial growth. They also show biocompatibility with cultured H9C2 cardiomyocytes and hemocompatibility in vitro. Dry heat sterilization is generally not suitable for PVC medical wares due to their poor thermal compatibility. Surprisingly, our antimicrobial-biocompatible PVC can maintain stability at 180°C for 90 min. Such a high thermal stability indicates the MFE-Al stabilized PVC can endure 90 cycles of dry-heat sterilization without significant damage. This study may provide a solution to reduce PVC medical waste for a maximum benefit without compromising human health or the environment.     

高分子水处理剂的绿色化研究进展

简要介绍了近年来水处理领域在高分子水处理剂产品及生产工艺方面的绿色化研究进展状况。     

半导体TiO2的光催化性能及其应用

TiO₂作为一种优秀的光催化材料，其在环境保护等领域的应用研究十分活跃，主要是在废水处理、空气净化、癌症治疗以及杀菌消毒等方面。介绍了新颖的光诱导超亲水性及其应用。     

纯化水系统中灭菌方法的应用及比较

分别采用二氧化氯溶液和臭氧水溶液对制药厂纯化水系统的贮罐和管道进行灭菌处理,比较灭菌效果和操作过程,最终认定臭氧水溶液灭菌方法在灭菌效率和水资源节约等方面优于二氧化氯溶液,适用于制药厂水系统管路、贮罐的灭菌处理.