The role of microbial electrogenesis in regulating methane and nitrous oxide emissions from constructed wetland-microbial fuel cell

This study assesses a sustainable solution to greenhouse gases (GHGs) mitigation using constructed wetland-microbial fuel cells (CW-MFC). Roots of wetland plant Acorus Calamus L. are placed in biological anode to better enable anode microorganisms to obtain rhizosphere secretion for power improvement. Three selected cathode materials have a large difference in GHG emissions, and among them, carbon fiber felt (CFF) shows the lowest emissions of methane and nitrous oxide, which are 0.77 ± 0.04 mg/(m²·h) and 130.78 ± 13.08 μg/(m²·h), respectively. The CFF CW-MFC achieves the maximum power density of 2.99 W/m³. As the influent pH value is adjusted from acidic to alkaline, the GHGs emissions are reduced. The addition of Ni inhibits GHGs emission but decreases the electricity, the power density is reduced to 1.09 W/m³, and the methane and nitrous oxide emission fluxes decline to 0.20 ± 0.04 mg/(m²·h) and 15.49 ± 1.86 μg/(m²·h), respectively. Low C/N ratio reduces methane emission, while high C/N ratio effectively inhibits nitrous oxide emission. At the influent pH 8 and C/N = 5:1, the methane emission flux is approximately 10.60 ± 0.27 mg/(m²·h), and the nitrous oxide emission flux is only 10.90 ± 1.10 μg/(m²·h). Based on the above experimental results by controlling variable factors, it is proposed that CW-MFC offers an environment-friendly solution to regulate GHG emissions.     

Electrophoretic deposition of graphene oxide on carbon brush as bioanode for microbial fuel cell operated with real wastewater

Microbial fuel cell (MFC) is a promising technology for simultaneous wastewater treatment and energy harvesting. The properties of the anode material play a critical role in the performance of the MFC. In this study, graphene oxide was prepared by a modified hummer's method. A thin layer of graphene oxide was incorporated on the carbon brush using an electrophoretic technique. The deoxygenated graphene oxide formed on the surface of the carbon brush (RGO-CB) was investigated as a bio-anode in MFC operated with real wastewater. The performance of the MFC using the RGO-CB was compared with that using plain carbon brush anode (PCB). Results showed that electrophoretic deposition of graphene oxide on the surface of carbon brush significantly enhanced the performance of the MFC, where the power density increased more than 10 times (from 33 mWm^?2 to 381 mWm^?2). Although the COD removal was nearly similar for the two MFCs, i.e., with PCB and RGO-CB; the columbic efficiency significantly increased in the case of RGO-CB anode. The improved performance in the case of the modified electrode was related to the role of the graphene in improving the electron transfer from the microorganism to the anode surface, as confirmed from the electrochemical impedance spectroscopy measurements.     

Investigation on sulphonated zinc oxide nanorod incorporated sulphonated poly (1,4-phenylene ether ether sulfone) nanocomposite membranes for improved performance of microbial fuel cell

Hydrothermally prepared zinc oxide nanorods are sulphonated (S–ZnO NR) and incorporated into 15% Sulphonated Poly (1,4-Phenylene Ether Ether Sulfone) (SPEES) to improve the hydrophilicity, water uptake and ion transfer capacity. Water uptake and ion transfer capacity increased to 34.6 ± 0.6% and 2.0 ± 0.05 meq g^?1 from 29.8 ± 0.3% and 1.4 ± 0.04 meq g^?1 by adding 7.5 wt% S–ZnO NR to SPEES. Morphological studies show the prepared S–ZnO NR is well dispersed in the polymer matrix. SPEES +7.5 wt% S–ZnO NR membrane exhibits optimum performance after three-weeks of continual operation in a fabricated microbial fuel cell (MFC) to produce a maximum power density of 142 ± 1.2 mW m^?2 with a reduced biofilm compared to plain SPEES (59 ± 0.8 mW m^?2), unsulphonated filler incorporated SPEES (SPEES + 7.5 wt% ZnO, 68 ± 1.1 mW m^?2) and Nafion (130 ± 1.5 mW m^?2) thereby suggesting its suitability as a sustainable and improved cation exchange membrane (CEM) for MFCs.     

绿色环保型水-乙二醇抗燃液

介绍了环保型水一乙二醇液压液的发展状况及性能特点，对比了环保型水－乙二醇液压液与其它润滑材料的生物降解性，表明这类水－乙二醇液压液是极具发展的环境友好型的抗燃液介质。     

当前宁波地区住宅产品可持续发展浅析

文章从居住社区的规划设计和建筑设计两方面以低能耗的角度分析了城市居住功能的分布、社区住宅建筑布局的合理性、社区景观设置的合理性以及停车、中水处理与被动式太阳能住宅建筑的相关先进生态理念,希望通过居住社区的生态可持续性设计改善社区的舒适性和能源的可持续性.     

用环境水利理念和方法建设富锦市城市防洪工程

本文结合富锦市城区堤防建设论述了城市防洪建设应从单一防洪目标逐步过渡到区域性多目标治理。以水利工 程为载体,推动促进环境的改善,实现防洪、水资源、生态环境以及城市景观建设的协调统一。     

Limited evidence of zebra mussel (Dreissena polymorpha) consumption by freshwater drum (Aplodinotus grunniens) in Lake Winnipeg

Freshwater drum (Aplodinotus grunniens) may be a predator of the invasive zebra mussel (Dreissena polymorpha), which established in Lake Winnipeg in 2013. In this study, the diets, trophic position, and growth of 51 freshwater drum collected in 2019 (six years post-zebra mussel invasion) were compared to 64 freshwater drum sampled in 2000. Benthic insect larvae were the dominant food items in both years. Although mollusks occur in high densities in Lake Winnipeg, they were only consumed by a few freshwater drum in either sample year. Zebra mussels were not a frequent prey item in 2019 as they were only consumed by four of the sampled freshwater drum. Stable isotope analysis of white muscle tissue yielded similar δ¹³C and δ¹⁵N values in both years and were consistent with a benthic, insectivorous diet. Length-at-age data derived from otoliths revealed that the 2019 population had at least an equal growth rate to the 2000 population. Weight-at-length data suggested that fish condition was greater in 2019 than in 2000, which coincided with increased benthic macroinvertebrate density in Lake Winnipeg. Based on these findings, Lake Winnipeg freshwater drum continue to feed predominantly on insect larvae and not zebra mussels.     

广东省东江流域显著水问题类型识别

通过构建流域水资源、水环境与水生态功能评价指标体系,采用ArcGIS自然间断点分级法分析广东省东江流域水资源、水环境与水生态3类涉水功能的空间格局特征,采用Spearman等级相关系数定量分析3类涉水功能间的交互作用,识别各地区显著水问题类型,并提出相应管控策略。结果表明：广东省东江流域水资源、水环境与水生态功能评价等级空间格局体现出显著的空间差异性;流域水资源、水环境与水生态功能间的交互作用类型为兼容;基于3类涉水功能评价等级及功能间交互作用类型,将广东省东江流域10个评价单元划分为水资源、水环境、水生态、水资源-水环境、水生态-水环境及非显著型6个显著水问题类型。     

The effects of water pollution on the immersion corrosion of mild and low alloy steels

The short-term immersion corrosion of mild and low alloy steels in seawaters is known to be proportional to the concentration of dissolved oxygen (DO) in the bulk water. Longer-term corrosion is a function of the activity of sulphate-reducing bacteria and is influenced by the concentration of nutrients in the bulk water. These influences are examined in more detail for the corrosion of steels in the brackish waters of the River Thames and for several immersion corrosion sites on the Eastern Australian seaboard and in the North Sea. The published data sources were supplemented with plausible assumptions about environmental conditions. New interpretations of the data are provided based on the previously published model for immersion corrosion. For waters with negligible salinity and sulphate levels early corrosion loss was shown to depend on the dissolved oxygen content of the waters, and later corrosion loss was a direct function of nitrogenous nutrient (pollution) levels. This also applies to longer-term corrosion.