Structural modifications and fibre processing of hydroxy-functionalised mesogenic polyazomethines

A number of semiflexible homopolyazomethines and copolyazomethines based on hydroxy-functionalised mesogenic cores have been synthesised and characterised. The reported polymers include structural modifications such as an alteration of the coaxiality, shortening of the flexible spacers or copolymerisation to attain materials with reduced melting temperatures and suitable processability. These structural alterations have been introduced by condensing different ,ω-bis-[(4-formyl-3-hydroxyphenyl)oxy]alkanes with 2-methyl-1,4-phenylenediamine and/or 4-methyl-1,3-phenylenediamine. Fibres have been melt extruded from those nematic polyazomethines with the most favourable thermal properties. As-spun and tension-annealed fibres have been investigated by thermal analysis (TGA and DSC), X-ray diffraction and SEM microscopy in an attempt to infer a relationship between microstructure and tensile properties. From the results presented here, copolymerisation incorporating flexible spacers of different lengths seems to be the best strategy to balance ease of processing and tensile properties. Some of the fibres have improved mechanical properties compared with those previously reported for this class of semiflexible polyazomethine. A nematic polyazomethine with a decamethylenic spacer has also been modified with low percentages of several metal ions [Fe(III), Zn(II), V(IV) and Ni(II)] in order to establish a comparison with previously reported Cu(II)-modified fibres.     

Effects of solvent and temperature on the coupling agent/epoxy resin interface

Increased wetting of the coupling agent/epoxy resin interface was observed when γ-glycidoxypropyltrimethoxysilane, polyfunctional aminosilane and γ-aminopropyltriethoxysilane were applied respectively from methyllethylketone, dimethylformamide and water on woven glass cloths which had been cleaned at 300°C. However, when factory-applied coupling agents were burnt off the woven cloths and fresh coupling agents re-applied, it was found that the nature of the factory-applied coupling agent influenced subsequent wetting. Thinner glass fibres showed a greater improvement in wetting rate than thicker fibres in those solvents identified to be good for improved wettability, irrespective of the heat-cleaning temperature.     

Biodegradable hollow microfibres to produce bioactive scaffolds

Biodegradable hollow microfibres containing particles loaded with specific active agents can be potentially employed to produce a special kind of substrate for tissue engineering, able to function as a scaffold and at the same time to act as a drug‐releasing system. Biodegradable hollow microfibres based on poly(lactic acid) were produced by a dry–wet spinning procedure. Drug‐loaded microparticles were prepared by a simple oil‐in‐water emulsion and entrapped inside the fibres. The morphology of both fibres and particles was investigated by scanning electron microscopy. The mechanical and thermal properties of the fibres were investigated by tensile tests and differential scanning calorimetry. In vitro tests were performed to evaluate the release of the drug from the fibres loaded with the particles Copyright © 2004 Society of Chemical Industry     

Effect of Bonder at Skin/Core Interface on the Mechanical Performances of Sandwich Structures Used in Marine Industry

The present work is aimed to extend the knowledge of mechanical properties of sandwich structures used for marine applications focusing on the possibility to increase the performances of such structures by adding a bonder at the skin/core interface. Therefore, three sandwich structures that are utilised in different structural components of a yacht were realised by manual lay-up. The mechanical characterisation was performed by flatwise compressive, edgewise compressive and three point flexural tests. The tests execution has allowed both to determine the mechanical performances and to understand the fracture mechanisms that take place when the bonder is added in the stacking sequence of the samples.     

Conceptual damage-sensitive features for structural health monitoring: Laboratory and field demonstrations

The use of damage-sensitive features to evaluate structural condition or health is a very critical aspect of structural health monitoring. The purpose of this paper is to investigate the potential of two different damage-sensitive features for detecting damage. Different damage scenarios are simulated on a large-scale laboratory structure and a three-span highway bridge for demonstration. The features presented in this paper are the modal flexibility-based deflection and curvature both of which are obtained directly from dynamic properties. In the literature, flexibility associated with mode shapes and mode shapes curvatures have been mostly explored. In this study, multi-input–multi-output dynamic data are used to obtain modal flexibility, which is a close approximation to the actual flexibility. A main novelty is that the curvature is calculated from the deflected shapes using the modal flexibility as opposed to using modal vectors. In this paper, the theory of the methodology is explained and then experimental studies and results are presented. For the experimental studies, the laboratory specimen and the three-span bridge were gradually damaged. It is shown that both deflection and curvature are conceptual and physically meaningful features for damage detection and localization. The issues and the requirements for these features to perform successfully are also presented.     

The formalization and analysis of a communications protocol

The MSMIE protocol [SBC89] allows processors in a distributed system to communicate via shared memory. It was designed to meet the reliability and efficiency needs of applications such as nuclear safety systems. We present a formal model of the MSMIE protocol expressed in the notation CCS. Desirable properties of the protocol are expressed in the modal mu-calculus, an expressive modal logic. We show that the protocol lacks an important liveness property. In actual operation, additional operating constraints are checked to avoid potential problems. We present a modified protocol and show that it possesses the liveness property even without checking operating constraints. We also show how parts of the analysis were automated with the Concurrency Workbench.     

齿轮减速器造型设计与模态分析

讨论复杂结构的建模方法,建立齿轮减速器三维实体模型并进一步建立了齿轮减速器的三维有限元模型,分析系统的固有特性,从而获得了设计所需的必要数据。     

可节约生产成本的湿处理工艺技术

从传统意义上来讲，针织物及对张力敏感的梭织物的湿处理生产线（包括漂白、染色、柒色后水洗）通常是利用染缸来完成的，而这正是高水耗、高蒸汽消耗和高能源消耗的症结所在，同时带来一些质量问题（如折痕、起毛球和刮印等）。随着现代连续式平幅湿处理线技术的发展，整体生产成本可以下降到最多这50％。介绍了德国欧宝泰克生产的敏感织物连续式平幅湿处理线设备。