Influence of internally dropped-off plies on the impact damage of asymmetrically tapered laminated CFRP

This paper presents an experimental study of low velocity impact response of carbon/epoxy asymmetrically tapered laminates. The tests are realised at energy between 10 and 30 J on two types of layup with multiple terminated plies. The type and localisation of damage are analysed using C-scan and micrographs. Then, the data is compared with the response of corresponding respective plain laminate. The effects of some tapering parameters (taper angle, drop-off disposition and configuration) on the impact damage mechanisms are also investigated. Very similar impact damage phenomena are found between tapered and plain laminates. The presence of material discontinuity due to the resin pocket affects less the damage mechanism than the structural difference between the thick and the thin sections.     

织物的拒油整理

文章概述了织物拒油整理的原理、整理方法以及对拒油整理效果的测试评价，并指出了目前拒油整理存在的问题。     

棉织物手感值的模糊综合评判研究

利用模糊综合评判数学模型对棉织物的手感值进行了计算与分析，这种方法简单、可靠，与主观评估结果有很好的一致性，为纺织生产的质量判断提供了便利。     

Micromechanical approach to damage mechanics of composite materials with fabric tensors

The purpose of this study is to apply continuum damage mechanics – introduced through the concept of fabric tensors – to composite materials within the framework of the theory of elasticity. A directional data model of damage mechanics for composite materials will be developed using fabric tensors. The introduction of fabric tensors into the analysis of damage of composite materials will allow for an enhanced and better understood physical meaning of damage. The micromechanical approach will be used here to relate the damage effect through fabric tensors to the behavior of composite materials. In this approach, damage mechanics is introduced separately to the constituents of the composite material through different constituents’ damage effect tensors. The damaged properties of the composite system as a whole can then be obtained by proper homogenization of the damaged properties of the constituents.

The derivation of a generalized formulation of damage evolution will be shown here in a mathematically consistent manner that is based on sound thermodynamic principles. Numerical examples will be presented to show applicability. In addition, damage evolution for the one-dimensional tension case is also illustrated.     

纯棉中粗厚织物短流程前处理工艺

对纯棉中、粗、厚织物短流程前处理的工艺条件，处方及效果作了全面介绍。     

Facile Hydrothermal Synthesis of Hierarchical Sodium P Zeolite as a Nonphosphate Detergent Builder

This study reports the preparation of hierarchical NaP zeolite with the aim of obtaining a non-phosphate detergent builder as an alternative for environmental remediation from eutrophication phenomenon. Hierarchically structured NaP zeolite was easily synthesized hydrothermally and under different syntheses conditions. Samples were characterized using several standard techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) spectroscopy, and N₂ adsorption–desorption analysis. Three powder detergents were prepared by mixing main components such as linear alkylbenzene sulfonate, sodium sulfate, sodium silicate, and sodium carbonate as well as different amounts of as-synthesized zeolite and sodium tripolyphosphate in the detergent formulation as potential detergency builders. Some different detergency tests as pH value, water insolubility, foam height, moisture content, alcohol insolubility, and surface tension measurement were carried out for all synthetic detergent samples and two commercial ones. The results demonstrated that the high cleaning performance of the powders was obtained as using eco-friendly zeolite builders in comparison with phosphate-based commercial and synthetic detergent samples.     

浅谈数据中心网络架构的发展

网络是数据中心的一个重要基础设施,而通常分为两大部分：前端计算网络以及后端存储网络.后端的存储网络目前主要是FC网络,不过随着IP技术的发展,采用FCoE技术融合前后端网络成为一种趋势.本文主要关注前端计算网络.     

The relation between compressive strength of carbon/epoxy fabrics and micro-tow geometry with various bias angles

In this paper compressive tests of carbon/epoxy (plain weave, 3k) fabric composites were performed to investigate the relation between compressive strength and various bias angles and shear angles. Compressive properties such as chord modulus and maximum strength of the fabric composite materials are essential to analyze the drape behaviour and estimate the quality of the final products. Various specimens with different bias and shear angles which were fabricated by using autoclave de-gassing moulding process were prepared to estimate the strength and chord modulus with respect to the bias and shear angle variations. The stacking sequences of the compressive test specimens are [0]_10T, [15]_10T, [30]_10T and [45]_10T for bias specimens and [±37]_10T, [±32]_10T, [±28]_10T, [±22]_10T for sheared specimens. Micro-tow structures were observed to correlate the fabric compressive strength with crimp angle. Anti-buckling rig was involved to prevent specimens from buckling during the compressive tests. The compressive test was performed with 1.3 mm/min strain rates. Compressive test results were compared with calculation results. Facture modes which were classified in two different modes were analyzed using microscopic observation.     

A new skeletal model for fabric drapes

Fabric drapes are typical large displacement, large rotation and small strain problems. Compared with continuum shell finite element methods, methods that skeletonize the fabric sheet into a set of interconnected nodes appear to be more popular in drape problems with extensive wrinkles. These skeletal methods may resort to particle mechanics and formulate the elastic energy or the equations of motion in terms of the node-to-node distance and the angles between the straight lines joining adjacent nodes. Alternatively, beam elements can be employed to skeletonize the fabric sheet at the expense of using rotational in addition to translational nodal DOFs. In this paper, a new skeletal model based on the small strain and curvature assumptions is devised. In contrast to most, if not all, skeletal models for fabric drape simulation, all the stretching, shearing and bending energies in the model are simple polynomials of the grid-point␣displacement. Fabric drape problems with extensive wrinkles are examined. The presence of sharp fold, seam and cut in the undeformed fabric sheet as well as fabric-to-solid contact are considered. The predicted appearances are pleasant and conform to real life observations.     

针织物节能减排漂染工艺探讨

将新开发的高效前处理、染色助剂应用于针织物实用高效漂染工艺,探讨其应用工艺、产品质量及节能减排效果。分析各类前处理碱氧一浴工艺的特点、应用特性及节能减排效果;阐述涤棉针织物练染一浴工艺,免还原清洗工艺,棉针织物活性染色与抛光一浴工艺及活性染色后皂洗酶后处理工艺。并与相应的传统工艺对比其工艺曲线、质量水平、节能减排效果及污染物浓度降低情况。客观评价各类工艺的优缺点,建议生产厂家根据产品质量要求,选用相应高效助剂,并结合实际生产设备优化工艺后使用,节能减排效果将更加显著。