Studies on the dielectric and relaxor behavior of sol-gel derived barium strontium zirconate titanate thin films

The dielectric behavior of sol-gel derived Ba_0.80Sr_0.20(Zr_xTi_1−x)O₃ (0.0 ≤ x ≤ 0.50) thin films is studied. A relaxor behavior is observed for x ≥ 0.35. The degree of relaxation increases with Zr content. The frequency dependence of the polar regions follows Vogel-Fulcher relation with a characteristic cooperative freezing at freezing temperature (T_f). Below T_f, a long range polarization ordering is likely to take place. The plausible mechanism of the relaxor behavior of BSZT thin films with Zr contents ≥ 0.35 has been proposed based on the measured temperature as well as frequency dependent dielectric data. The solid solution system is visualized as a mixture of Ti^+ 4 rich polar regions and Zr^+ 4 rich regions; with the increase in Zr content the volume fraction of the polar regions is progressively reduced. At and above 35.0 at.% Zr substitution the polar regions exhibit typical relaxor behavior.     

Dichotomous behavior of polymer melts in isothermal melt spinning

Isothermal melt spinning experiments have been conducted using two polyethylene melts of low density (LDPE) and high density (HDPE) to produce steady state spinline profiles. The data revealed the threadline extensional viscosity exhibiting a contrasting picture : extension thickening behavior for LDPE and extension thinning one for HDPE. A White-Metzner model having a strain rate-dependent relaxation time was then found to be able to simulate this dichotomy in melt spinning fairly well: the fluids whose relaxation times have smaller strain rate-dependence can fit LDPE data with extension thickening extensional viscosity whereas the fluids whose relaxation times have larger strain rate-dependence can fit HDPE data with extension thinning extensional viscosity. This dichotomous nature of viscoelastic fluids is also believed to be able to explain other similar contrasting phenomena exhibited by polymer melts, such as vortex/no vortex in entry flows, cohesive/ductile fracture modes in extension, and more/less stable draw resonance than Newtonian fluids.     

Affective computing vs. affective placebo: Study of a biofeedback-controlled game for relaxation training

Relaxation training is an application of affective computing with important implications for health and wellness. After detecting user׳s affective state through physiological sensors, a relaxation training application can provide the user with explicit feedback about his/her detected affective state. This process (biofeedback) can enable an individual to learn over time how to change his/her physiological activity for the purposes of improving health and performance. In this paper, we provide three contributions to the field of affective computing for health and wellness. First, we propose a novel application for relaxation training that combines ideas from affective computing and games. The game detects user׳s level of stress and uses it to influence the affective state and the behavior of a 3D virtual character as a form of embodied feedback. Second, we compare two algorithms for stress detection which follow two different approaches in the affective computing literature: a more practical and less costly approach that uses a single physiological sensor (skin conductance), and a potentially more accurate approach that uses four sensors (skin conductance, heart rate, muscle activity of corrugator supercilii and zygomaticus major). Third, as the central motivation of our research, we aim to improve the traditional methodology employed for comparisons in affective computing studies. To do so, we add to the study a placebo condition in which user׳s stress level, unbeknown to him/her, is determined pseudo-randomly instead of taking into account his/her physiological sensor readings. The obtained results show that only the feedback presented by the single-sensor algorithm was perceived as significantly more accurate than the placebo. If the placebo condition was not included in the study, the effectiveness of the two algorithms would have instead appeared similar. This outcome highlights the importance of using more thorough methodologies in future affective computing studies.     

Termination rate coefficients for acrylamide in the aqueous phase at low conversion

The kinetics of acrylamide (AAm) free radical polymerization at low conversion of monomer to polymer in the aqueous phase was investigated at 50 °C using γ-radiolysis relaxation, which is sensitive to radical-loss processes. The values of the termination rate coefficients for AAm ranged from 8×10⁶ to 3×10⁷ M⁻¹ s⁻¹ as the weight fraction of polymer ranged from 0.002 to 0.0035, which is significantly lower than the low-conversion values for monomers such as styrene (2×10⁸ M⁻¹ s⁻¹) and methyl methacrylate (4×10⁷ M⁻¹ s⁻¹) in organic media. These can be quantitatively explained by applying a chain-length-dependent model of free-radical polymerization kinetics [Russell GT, Gilbert RG, Napper DH. Macromolecules 1992;25:2459. [19]] in which termination kinetics are expressed in terms of a diffusion-controlled encounter of radicals which ultimately yields an expression for the chain-length-averaged termination rate coefficient, 〈k_t〉. The lower 〈k_t〉 for AAm arises due to a combination of the high k_p value, promoting rapid formation of slower terminating long chains, and the slow diffusion of short propagating chains, relative to other common monomers. The chain transfer to monomer constant for AAm in water at 50 °C, C_M, was estimated using the chain-length-distribution method with correction for band-broadening [Castro JV, van Berkel KY, Russell GT, Gilbert RG. Aust J Chem 2005;58:178. [21]] and found to be 1.2×10⁻⁴ (±10%). The diffusion characteristics for AAm were adapted from those obtained for a similar aqueous system (hydroxyethyl methacrylate) together with a 0.5 exponent for the power law dependence on penetrant degree of polymerization at zero weight fraction polymer. This provides an adequate fit to the 〈k_t〉 data. This is the first application of the chain-length-dependent model to describe experimental termination rate coefficients for an aqueous system at low conversion to polymer. The result that the experimental termination rate coefficients can be reproduced with an a priori model with physically reasonable parameters supports the physical assumptions underlying that model.     

Low-Field Nuclear Magnetic Resonance Time Domain Characterization of Polyunsaturated Fatty Acid–Rich Linseed and Fish Oil Emulsions during Thermal Air Oxidation

Linseed contains high levels of polyunsaturated fatty acids (PUFA), such as α-linolenic acid (> 50% ALA-18:3), that are naturally protected against thermal oxidation by their encapsulation within linseed oil bodies (OB) by multiple components including antioxidant proteins and mucilage emulsifying agents. Linseed OB emulsions (LSE) can be produced by grinding linseed seeds, adding water, adjusting pH, and sonication. This is a process that can encapsulate externally added PUFA to minimize their thermal oxidation, as it does for the intrinsic ALA PUFA. Fish oil (FO) encapsulation into this LSE platform to form linseed fish oil emulsions (LSFE) offers the possibility of a nutritive delivery system of the biologically essential FO PUFA eicosapentaenoic acid and docosahexaenoic acid. In this study, ¹H low-field nuclear magnetic resonance (LF-NMR) is used to characterize LSE's and LSFE's chemical and structural properties as well as their stability and changes under thermal oxidation (55 °C for 96 hours). ¹H LF-NMR data processing was developed to generate one-dimensional (1D) T₁ (spin–lattice), 1D T₂ (spin–spin), and 2D (T₁ vs. T₂) relaxation time spectra that can characterize OB emulsions and monitor their time domain fingerprints (spectrum peaks) of chemical and structural changes during the oxidation process. The ¹H LF-NMR analysis were further supported and correlated with conventional peroxide value test, self-diffusion, droplet size distribution, zeta potential estimation of surface stability, and gas chromatography–mass spectrometry analysis of fatty acid profile changes under thermal oxidation conditions. The 1D and 2D LF-NMR relaxation spectra showed that the LSE and LSFE did not suffer intense oxidation process, due to PUFA assembly in OB oxidative protection. These results were further confirmed by the supportive analytical methodologies. The results of this study demonstrate the efficacy of ¹H LF-NMR methodology to monitor PUFA's rich oil and emulsion thermal oxidation.     

NMR investigation of experimental chemical induced brain tumors in rats, potential of a superparamagnetic contrast agent (MD3) to improve diagnosis

The different steps of development of chemically induced brain tumors were investigated in rats by MRI using a superparamagnetic contrast agent, magnetite-dextran nanoparticles (MD3). Sprague-Dawley strain pregnant female rats were injected intravenously with ethynitrosourea solution at the end of pregnancy. Offspring whelped by the inoculated mother were followed. MRI examinations were performed at 0.5 T. MD3 nanoparticles were injected intravenously at a dose of 5 mg Fe kg^-1 body weight 30 min before rat sacrifice. After sacrifice, histological slices were stained with hematoxylin-eosin. Relaxation times were measured at 40 MHz and 37°. MD3 nanoparticles act differently according to the step of the tumor development. Before tumor appearance, at a step characterized by the presence of abnormal cell clusters, relaxation time T2 increased significantly. The T2-weighted image showed a small increase in signal intensity in the lesion. Image contrast was improved by MD3 nanoparticles injection because of the decrease in healthy tissue signal intensity. The Tl-weighted image did not provide any additional information. In presence of a minute tumor, relaxation times decreased in tumor but increased in surrounding tissue. The Tl-weighted image showed a hypersignal on the border of an hyposignal. T2-weighted image showed a hypersignal in the same area. Signal intensity was not modified after MD3 nanoparticles injection. When new vascular capillaries developed in the tumor, MD3 nanoparticles cross into the cerebral parenchyma. Transmission electron microscopy showed magnetite crystals in this specific area on cytoplasm vesicles of glial cells and in tumor-specific membrane arrangements. On T2-weighted image, the hypersignal consisted of a well defined part and a second more fuzzy part, its signal being extinguished after MD3 nanoparticles injection. Necrotic areas and edema can be discriminated. The use of such a superparamagnetic contrast agent would be helpful in early detection of tumor development and in improving distinction of tumor mass from its vascular environment in patients. © 1998 Elsevier Science B.V. All rights reserved.     

Convergence of a parallel jacobi-type method

A relaxed Jacobi-type iterative scheme is presented for solving linear algebraic systems. The method possesses a high level of parallelism and can be implemented on a multiprocessor system with or without synchronisation. The convergence region of the relaxation parameter is determined under the condition that the Jacobi iteration matrix possesses real eigenvalues. However, when the method is applied to consistently ordered systems, it is preferrable to let the parameter equal to unity and use Conjugate Gradient methods [3] to further increase the convergence rate.     

High density polyethylene (HDPE): Experiments and modeling

The uniaxial tension (loading and unloading), creep and relaxation experiments on high density polyethylene (HDPE) have been carried out at room temperature. The stress–strain behavior of HDPE under different strain rates, creep (relaxation) behavior at different stress (strain) levels have been investigated. These experimental results are used to compare the simulation results of a unified state variable theory, viscoplasticity theory based on overstress (VBO) and a macro-mechanical constitutive model for elasto-viscoplastic deformation of polymeric materials developed by Boyce et al. (Polymer 41:2183–2201, 2000). It is observed that elasto-viscoplasticity model by Boyce et al. (Polymer 41:2183–2201, 2000) is not good enough to simulate stress–strain, creep and relaxation behaviors of HDPE. However, the aforementioned behaviors can be modeled quantitatively by using VBO model.     

一种自适应的概率松驰影像匹配算法的研究

通过计算双目影像特征的上下视差及其它们的关系,提出了一种对标准松驰算法的相容系数中的各参数的自适应算法。实验结果表明,该算法与松驰法标准计算公式相比大大减少了近代次数,提高了影像匹配的计算速度 。     

双向负阻晶体管张弛振荡器分频锁相特性的研究

本文用简单模型描述了双向负阻晶体管(BNRT)张弛振荡器在周期冲激作用下的分频锁相特性。对于任何分数p/q,给出了在参数空间中分频锁相区的普遍的分析表达式。对于BNRT张弛振荡器进行了分频锁相实验,实验结果与计算相符,说明理论分析是正确有效的。