SUN工作站的EEPROM浅析

ＥＥＰＲＯＭ的参数设置控制着系统的基本功能，设置的改变对系统的起动和运行起着重要作用。本文详细地列出了ＥＥＰＲＯＭ的地址分配表，并通过上机实验对那些重要的地址了详细的说明。     

CAPP中参数化规格表的建立及可视化填写的实现

计算机辅助工艺设计（CAPP）软件能否高效地发挥其功用，其基础数据库建立的好坏起着极其重要的作用。在对众多商品化CAPP软件进行详细调研的基础上，开发出了能由用户自行建立参数化规格表并实现可视化填写的CAPP系统，并在国家863/CF-CIMS应用示范工程中得到应用。     

The composition of hydrogenated fats by high-resolution13C nuclear magnetic resonance spectroscopy

The high-resolution¹³C nuclear magnetic resonance spectra of twelve hydrogenated fats have been examined. Each spectrum contains 50–100 signals and reveals much about the nature of the acyl chains of both double-bond position and configuration. The signals for the ω1, ω2 and ω3 carbon atoms give information on thecis andtrans isomers of the Δ15, Δ14, Δ13 and Δ12 18:1 esters, respectively. Allylic signals distinguish betweencis andtrans esters, and the proportion of totalcis to totaltrans isomers can be obtained from these. Olefinic signals are the most informative, and most of these have been assigned. This leads to a semi-quantitative estimate of the various 18:1 isomers present. Assignments are based mainly on information already in the literature, but some were confirmed after urea fractionation of the acids from a hydrogenated oil in whichcis andtrans monoene acids were separately concentrated.     

废餐饮油制备生物柴油研究现状与应用前景

介绍了利用废餐饮油制备生物柴油的研究现状与应用前景;叙述了酸催化、碱催化和酶催化的酯交换制备生物柴油工艺,以及每种工艺的优缺点.阐述了我国利用餐饮废油制取生物柴油的意义和利用餐饮废油制取生物柴油的商业化生产的可行性.     

Fatty acid composition of spanish shortenings with special emphasis on <Emphasis Type="Italic">trans</Emphasis> unsaturation content as determined by fourier transform infrared spectroscopy and gas chromatography

A Fourier transform infrared spectroscopic procedure was used to analyze 34 edible fats (22 shortenings and 12 vegetable margarines) as neat fats (IR_NF) to determine their total trans fatty acid (TFA) content. The sloping baseline was corrected with a reference spectrum based on a nonprocessed olive oil. The calibration was done using seven partially hydrogenated fats with an individual TFA content previously determined by the combination of gas chromatography (GC) with argentation thin-layer chromatography. Taking into account the different absorptivities of various trans isomers, different correction factors were calculated using the calibration standards (0.83 and 1.71 for single trans bonds in both diethylene and triethylene and for trans, trans-diethylene fatty acids, respectively) and applied to calculate the total TFA of samples. Moreover, the samples were converted to their methyl esters and reanalyzed following the same procedure (IR_FAME). Differences in TFA content of fats were not found when a t-test was used to compare the results obtained by IR_NF vs. either IR_FAME or GC, suggesting that IR of neat fats could be used, thus avoiding the need to prepare sample solutions in organic solvents and to prepare fatty acid methyl esters. The mean TFA content (determined by IR_NF) of a representative group of Spanish shortenings (22 samples) that varied widely in terms of fat sources, processes, and purposes (bakery, sandwiches, ice cream, coatings, chocolate coverings) was 6.55±11.40%, although more than 54% contained <3% of TFA. Fatty acid composition of shortenings by direct GC using a 100-m polar cyanopolysiloxane capillary column indicated that the mean trans-18∶2 isomer content was 0.58%, ranging from 0.9 to 3.4%. Small amounts of trans-18∶3 isomers (<0.3%) were observed in 18 of the 22 shortenings studied; the maximal value was <2%. The mean value of the fraction saturated+TFA of shortenings was high (59.95±12.73%), including two values higher than 83%.     

基于模型的测试用例生成方法

在大量软件出现的今天,除开软件的功能是否完善外,对软件本身提出了更高的安全性和稳定性要求;一款软件在上线前需要进行大量的测试,以便提升软件的质量;由于开发人员参与了软件的研发及上线流程,导致了看待软件问题的局限性,而测试人员在编写测试用例时,往往由于依据文档的不一致性,使得测试用例的价值大打折扣;并且在实际软件的开发流程中,测试环节与开发严重脱节;往往只是为了出相应的测试报告而去测试,偏离了测试的初衷;针对以上问题,提出基于模型的用例生成方法,能够基于工作流程图、判定表、状态转换等多种测试方法,并在该方法中应用边界值与等价类的思想,够贯穿整个软件研发的生命周期,在软件研发初期就能够参与测试,提出设计方案的不足;并且能够自动生成测试用例,提高测试人员的效率.     

PE文件结构分析和构建

主要分析了PE文件的整体结构,重点探讨了PE头结构、输入表以及节表数据,以此重新构建PE文件,形成可执行PE文件。     

325MW空冷汽轮机低压缸末级动叶片Z型拉筋凸台及拉筋孔的加工

论述了 3 2 5MW空冷汽轮机低压缸第 6级 (末级 )动叶片上结构新颖、型面构成复杂的Z型拉筋凸台及凸台拉筋孔的加工工艺 ,并结合工厂的实际情况 ,分别对叶片内、背弧拉筋凸台的型线、凸台端面以及拉筋孔的加工进行了详细的分析研究 ,提出了切实可行的加工工艺方案。     

Excel对学生成绩的频度分析的研究

数据频度分析是Excel的重要功能之一,Excel对学生成绩频度分析有四种方法：COUNTIF函数、COUNTIFS函数、FRE-QUENCY函数和数据透视表。四种方法均能方便快捷的完成对成绩数据的频度分析,完美高效地解决成绩统计问题。     

基于文件的静态Web查询设计与实现

用程序把DBF表自动转换一个记录为一个文件的HTML格式的文件,用PHP代码模拟实现数据库功能,实现基于文件的静态Web查询。