喷气纺纱质量影响因素探讨

简要分析了半制品质量对喷气纱强力和条干的影响，着重探讨了喷气纺纱机喷嘴压力、牵伸比、集合器宽度等对成纱强力和条干的影响。试验证明，提高半成品的质量、制定适宜的喷气纱工艺是改善成纱强力和条干的关键。     

新型并条胶辊套筒的特点及运用

为了解决常规并条胶辊套筒存在的易发热、易漏油，芯轴易弯曲磨损以及保养、能耗等问题，介绍了新型免加油并条胶辊套筒的性能特点并以实际生产数据进行对比；说明实际使用该新型并条胶辊套筒综合效果好，具有省工省时、降低消耗、质量稳定、使用寿命长、总投资少等优点。     

Simultaneous HPLC quantification of total cholesterol,tocopherols and β-carotene in Barrosã-PDO veal

A simple, rapid and sensitive procedure for the simultaneous determination of total cholesterol, tocopherols and β-carotene in meat is described. The method involves a direct saponification of the meat, a single n-hexane extraction and the analysis of the extracted compounds by normal-phase HPLC, using fluorescence (tocopherols) and UV–Vis photodiode array (cholesterol and β-carotene) detections in tandem. Rates of recovery of spiked meat samples were 93% for cholesterol, 83–86% for (α-, β- and -γ) tocopherols and 89% for β-carotene. Repeatabilities were high (CV < 6%) for all determined compounds, except for δ-tocopherol. This tocopherol, which is not usually present in meat, showed a much lower recovery percentage (73%) and repeatability (12.8%). This methodology was applied for the quantification of total cholesterol, tocopherols and β-carotene in three muscles (longissimus thoracis, longissimus lumborum and semitendinosus) of the Portuguese traditional Barrosã-PDO veal, obtained from autochthonous calves fed extensively during summer (with the least abundant green pastures) and slaughtered in early autumn (October). Barrosã-PDO veal showed median contents of total cholesterol (0.50–0.56 mg/g) and, depending on the analysed muscle, moderate to high contents of α-tocopherol (3.3–3.9 μg/g) and β-carotene (0.07–0.09 μg/g), suggesting an high sensorial and hygienic quality.     

Effect of functional group of ferrocene redox substance on the transport properties of newly designed ion exchange membrane prepared from polymer gel

A different newly designed cationic exchange polymer membrane and anionic exchange polymer membrane were introduced, and also the transport properties of these polymeric membranes were investigated in this study. The transport properties of these polymer membranes in contact with ferrocene redox derivatives were estimated by using electrochemical techniques such as cyclicvoltammetry, chronopotentiometry, and chronoamperometry techniques, respectively. The used ferrocene redox substances, which have different functional groups, were (Ferrocenylmethyl) trimethylamonium iodide, FcMA, Ferrocenedimethanol, FcDM, and Ferrocene carboxylic acid, FcCA. It indicated that the performance of a membrane depended on the content of polymer gel, anionic exchange polymer site (20 wt % and 50 wt %) or cationic polymer exchange site (20 wt % and 50 wt %), and the efficiency of the functional groups of cationic and anionic exchange polymer site as well. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

如何提高干式喷射彩色混凝土的观感质量

从彩色混凝土喷射施工的特点出发，结合工程实例，分析了影响喷射彩色混凝土观感质量的原因和解决方法。指出彩色混凝土喷射工艺可以有效地解决大面积混凝土边坡与周围环境的协调性问题。     

浅谈提高沥青路面平整度的施工措施

本文对施工过程中影响沥青路面平整度的原因进行了分析,提出了相应的施工措施。     

Synthesis and electrochemical properties of Al-doped LiVPO4F cathode materials for lithium-ion batteries

Al-doped LiVPO4F cathode materials LiAlxV1-xPO4F were prepared by two-step reactions based on a car-bothermal reduction （CTR） process. The properties of the Al-doped LiVPO4F were investigated by X-ray diffraction （XRD）,scanning electron microscopy （SEM）,and electrochemical measurements. XRD studies show that the Al-doped LiVPO4F has the same triclinic structure （space group p-↑1 ） as the undoped LiVPO4F. The SEM images exhibit that the particle size of Al-doped LiVPO4F is smaller than that of the undoped LiVPO4F and that the smallest particle size is only about 1 μm. The Al-doped LiVPO4F was evaluated as a cathode material for secondary lithium batteries,and exhibited an improved reversibility and cycleability,which may be attributed to the addition of Al^3＋ ion by stabilizing the triclinic structure.     

一种新的知觉分割模型*

根据知觉的最新理论研究和实验结果,提出一种新的知觉模型,并用于考查计算机视觉中的分割问题.分割问题实质上是知觉表达问题,现在分割的困难性可能是知觉上局部到整体的还原论假设造成的;分割可能不是一次完成的,而是经过整体到局部的过程才最终完成.新的知觉模型将对建立更好的分割模型提供理论基础.     

FDY油剂的润湿性及其对纺丝加工性能的影响

介绍了 FDY油剂润湿性的意义及其在纺丝加工过程中的作用。讨论了润湿性对加工纤维的摩擦系数、抗静电性、强伸度的均匀性及可纺性的影响程度     

Critical evaluation of coupling particle size distribution with the shrinking core model

The shrinking core model (SCM) is widely used to model fluid-solid reactions such as the leaching of metals from minerals. In most cases, however, the particle size distribution (PSD) of the solid material was disregarded. In this paper the erroneous shift in the control regime when neglecting PSD was quantified and the dependence of the shift on the coefficients of variation (CV) and the type of PSD was analysed. By coupling the SCM with a Gamma PSD, it was found that neglecting the PSD would shift the control regime from chemical reaction to inert/ash layer diffusion, when the CV was between 0.7 and 1.2. For a system controlled by liquid film diffusion, neglect of the PSD, would shift the control regime to chemical reaction when CV is between 0.3 and 0.7 or to inert/ash layer diffusion when CV is greater (0.9-1.5). It was therefore postulated that some researchers had unknowingly made invalid conclusions about the control regime due to the neglect of PSD. However, an inert/ash layer diffusion-controlled process was insensitive to the neglect of PSD. When CV<0.3, neglect of the PSD would not cause any erroneous shifts, irrespective of the control regime. Experimental data confirmed the observation. For a given CV, the deviation in the fraction reacted from the mono-PSD increases with CV and decreases with time. The maximum deviation, which occurs at the beginning, is about 10% with a gamma PSD of CV=0.3. The percent deviation is dependent of the type of PSDs. Gamma PSD gives the lowest deviation while Gaudin-Schuhmann results in the largest deviation (maxi. ∼19%, with CV=0.3) in the first half of dissolution process. Log-normal distribution gives a larger deviation than gamma but quickly approaches the latter with time. The deviation for Rosin-Rammler is between log-normal and Gaudin-Schuhmann. For systems with CV less than 0.3, the SCM can be fairly used without considering PSD. When CV is greater than 0.3, particularly in the early stage of a dissolution process with a PSD other than gamma, PSD should be included to avoid substantial errors.