Novel pearl millet couscous process for West African markets using a low-cost single-screw extruder

Traditional West African pearl millet couscous products are popular; however, their preparation is laborious, time-consuming and energy-demanding, involving agglomeration, steaming, drying and sieving steps. In this study, a process was developed to produce millet couscous using a high pressure, high temperature and low-cost single-screw extruder. The innovation was to directly process the cooked low-moisture extrudate to a couscous product by drying and milling to the appropriate particle size (ranging between 1 and 2 mm). Throughput for the traditional process as prepared for commercial sale is 50 kg per day, but with the same amount of labour, the extrusion process yields ~350 kg per day. A consumer sensory study held in Niamey (Niger) showed that the extruded millet couscous was comparable to traditional couscous, though this was dependent on selection of the proper millet variety. This novel extrusion process could stimulate small- to medium-scale manufacturing of couscous and couscous-type products in West Africa.     

Comparison of xylo-oligosaccharides production by autohydrolysis of fibers separated from ground corn flour and DDGS

Xylo-oligosaccharides (XOS) are known to have beneficial health properties, and are considered to be functional food ingredients. The objective of this study is to compare corn fibers separated from ground corn flour and distillers dried grains with solubles (DDGS) for XOS yield and optimum autohydrolysis conditions. Based on the initial xylan content, the fiber separated from ground corn flour (FC) resulted in higher XOS yield (71.5%) than the fiber separated from DDGS (FD) (54.6%) at the maximum XOS production conditions. XOS produced were mainly xylobiose and xylotriose. Based on total initial material also, FC resulted in higher XOS yield (8.9%) than FD (8.0%), based on total original masses. Thus, fiber separated from ground corn flour would be a better feedstock for production of XOS than fiber separated from DDGS. The conditions for maximum XOS production from FD and FC were 180 °C with 20 min hold-time and 190 °C with 10 min hold-time, respectively.     

Synthesis of Cellulose-Based Macromolecular Coupling Agent and its Utilization in Poly (butylene succinate)/Wood Flour Composites

A long fatty side chain was introduced into the macromolecule of hydroxyethyl cellulose (HEC) via esterification reaction. The hydrophobicity of hydroxyethyl cellulose lauric acid ester (HECLAE) was enhanced in comparison with HEC. The obtained HECLAE was used as macromolecular coupling agent in poly (butylene succinate)/wood flour composites and exhibited a positive influence on improving the mechanical performance of composites. Besides, HECLAE plays a role as a hydrophobic agent in composites. A significant increase in storage modulus (E’) was observed upon the incorporation of treated wood flour. SEM images showed that the dispersion of treated wood flour in PBS matrix was improved.     

浅议糯米酒的研制及系列化

经过对现在普遍采用的糯米酒生产工艺的改进，多次研制试验，最后确定的两种工艺为；（1）清质型工艺流程；（2）乳浊型工艺流程。合理的工艺条件参数为：淋饭温度30－35℃；多曲混合发酵，曲的用量为1％左右；糖化温度30－35℃，2－3d，最终糖度25g/100ml，加浆发酵温度0－5℃，灌装杀菌温度75－80℃，45min。     

Effect of precooking time and drying temperature on the physico-chemical characteristics and in-vitro carbohydrate digestibility of taro flour

Achu is a thick porridge obtained by cooking and pounding taro (Colocasia esculenta) corms and cormels in a mortar. This study was undertaken with the objective of producing precooked taro flour that can be used in the preparation of achu. Taro slices were precooked to times of 0, 20, 45 and 90 min and dried in an air convection oven at varying temperatures of 50, 60, 70 or 80 °C before milling into flour which was then analysed for its water absorption capacity (WAC), water solubility index, emulsion activity and stability, bulk density, foam capacity and least gelation concentration (LGC). Achu made from the flours were equally analysed for their relative penetrometric index, bulk density and colour. The results showed that precooking induced significant (P<0.05) decrease in foam capacity, penetrometric index, and increase in LGC, emulsion stability and WAC. The drying temperature also induces significant reduction in emulsion capacity and stability, penetrometric index, and increase in LGC, WAC. Long precooking time (>45 min) and drying temperature (>60 °C) induced significant reduction of the in-vitro carbohydrate digestibility of taro achu.     

Emulsifying Capacity and Emulsion Stability of Soy Proteins Compared with Corn Germ Protein Flour

Both emulsifying capacity (EC) and emulsion stability (ES) increased with increasing concentrations from 0.4% to 0.8% of soy flour (SF), soy concentrate (SC), soy isolate (SI) and corn germ protein flour (CGPF) when studied by response surface methodology. EC and ES increased as pH increased from 6 to 8 in all samples. Increasing incubation temperatures of protein solutions from 20–70°C or from 4–20°C did not affect EC or ES, respectively. SF had the highest EC, followd by SI, SC, and CGPF.     

Effect of olive residue benzylation on the thermal and mechanical properties of poly(vinyl chloride)/olive residue composites

The changes in mechanical properties, the thermal stability, and the water absorption capacity of poly (vinyl chloride)/olive residue flour composites were studied as a function of various residue olive flour ratios, i.e., 0, 5, 15, and 25% by weight taking into account the effect of benzylation chemical treatment of the filler. The study showed that composite samples prepared with the untreated filler exhibited higher tensile modulus and hardness compared with the neat resin, whereas elongation and tensile strength were observed to decline. On the other hand, the PVC hardness was found to increase with addition of the untreated olive residue flour (ORF), however the composite samples prepared with the benzylated flour exhibited lower hardness than those prepared with untreated olive residue. Moreover, the amount of absorbed water depends on the amount of filler in the composite. The comparison of the results obtained from the samples of F5, F20, and F30 formulations between the untreated and treated ORF indicated a reduction in absorbed water for the composite samples containing treated ORF with benzyl chloride. As a result, the mechanical properties of the treated composites were improved. Furthermore, the thermal characterization of the different samples carried out by color change test and thermogravimetric analysis revealed an increase in the onset temperatures of decomposition for the treated composites. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

关于影响面条食用品质相关因素的探讨

从小麦生产概况、面条发展历史和工艺、国内外对面条食用品质的研究3个方面,分析了我国面条工业发展缓慢的原因,提出了小麦育种-面粉工业-制面工业,3个环节紧密配合,协调发展,才能形成良性循环的新思路。     

Phosphorus seed coating increases phosphorus uptake,early growth and yield of pearl millet (Pennisetum glaucum (L.) R. Br.) grown on an acid sandy soil in Niger,West Africa

In pot and field experiments conducted in 1990 and 1991 on an acid sandy, phosphorus (P) deficient soil in Niger, West Africa, the effect of seed coating on seedling emergence, early growth and grain yield of pearl millet (Pennisetum glaucum (L.) R. Br.) was studied. Seeds of pearl millet were coated with different rates (0; 0.5; 1.0; 2.0; 5.0; 10.0 mg P seed^–1) and types of P fertilizers (single superphosphate, ammonium dihydrogen phosphate; monocalcium phosphate, sodium dihydrogen phosphate and sodium triphosphate). Seedling emergence was generally reduced at coating rates higher than 0.5 mg P seed^–1 and prevented with single superphosphate and sodium triphosphate at rates higher than 5 mg P seed^–1. No correlation was found between the pH and osmomolity of the coatings and final emergence of millet seedlings. The most favourable effect on plant growth and P content was achieved with ammonium dihydrogen phosphate (AHP) as seed coating. This was attributed to the enhancement effect of ammonium on P uptake. Compared to the untreated control dry matter production at 20 days after planting (DAP) was increased by 280%, P content per plant by 330%, total biomass at maturity by 30% and grain yield by 45%. Although seed coating with AHP may be harmful to seedlings emergence, it represents a suitable method to enhance early growth and increase yield of pearl millet.