Material encapsulation in poly(methyl methacrylate) shell: A review

Material encapsulation is a relatively new technique for coating a micro/nanosize particle or droplet with polymeric or inorganic shell. Encapsulation technology has many applications in various fields including drug delivery, cosmetic, agriculture, thermal energy storage, textile, and self-healing polymers. Poly(methyl methacrylate) (PMMA) is widely used as shell material in encapsulation due to its high chemical stability, biocompatibility, nontoxicity, and good mechanical properties. The main approach for micro/nanoencapsulation of materials using PMMA as shell comprises emulsion-based techniques such as emulsion polymerization and solvent evaporation from oil-in-water emulsion. In the present review, we first focus on the encapsulation techniques of liquid materials with PMMA shell by analyzing the effective processing parameters influencing the preparation of PMMA micro/nanocapsules. We then describe the morphology of PMMA capsules in emulsion systems according to thermodynamic relations. The techniques to investigation of mechanical properties of capsule shell and the release mechanisms of core material from PMMA capsules were also investigated. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48039.     

人工颅骨用复合材料中微量甲基丙烯酸甲酯的气相色谱法测定

采用氢气焰离子化检测器(FID),以正丁醇为外标物,PEG-20M为固定相,甲醇作为溶剂,气相色谱法测定复合材料人工颅骨中微量MMA的含量。其相对标准偏差<0.022,平均回收率(n=4)为98.0％～99.1％。此方法操作简便,用于实际样品分析可得到满意的结果。     

Study of the effect of BDMA catalyst in the epoxy novolac curing process by isothermal DSC

Epoxy novolac/anhydride cure kinetics has been studied by differential scanning calorimetry under isothermal conditions. The system used in this study was an epoxy novolac resin (DEN431), with nadic methyl anhydride as hardener and benzyldimethylamine as accelerator. Kinetic parameters including the reaction order, activation energy and kinetic rate constants, were investigated. The cure reaction was described with the catalyst concentration, and a normalized kinetic model developed for it. It is shown that the cure reaction is dependent on the cure temperature and catalyst concentration, and that it proceeds through an autocatalytic kinetic mechanism. The curing kinetic constants and the cure activation energies were obtained using the Arrhenius kinetic model. A suggested kinetic model with a diffusion term was successfully used to describe and predict the cure kinetics of epoxy novolac resin compositions as a function of the catalyst content and temperature. Copyright © 2003 Society of Chemical Industry     

甲磺酸铜催化合成草酸二异戊酯

制备了甲磺酸铜催化剂,对其结构进行了IR和热重分析,并用于催化草酸和异戊醇的酯化反应。结果表明,甲磺酸铜具有催化活性高、稳定,易分离,重复使用性能优良,对环境友好的特点。最佳酯化工艺条件为:n(异戊醇):n(草酸)=2．8:1,w(甲磺酸铜)=0．3％,以过量的异戊醇为带水剂,回流反应2．0 h,酯化率可达到96．8％。     

甲醇气相羰化合成醋酸甲酯的产物分析

以热导池为检测器,分别采用8/100间苯二甲酸+GDX-103、Porapak-Q分析甲醇气相羰化的液相产物和气相产物,确定了气相色谱分析的操作条件,测定了各组分的校正因子,并应用于甲醇绿色羰化合成醋酸甲酯的催化剂评选,得到了满意的结果。     

N-油酰基肌氨酸钠对除盐水缓蚀性能的探讨

对N-油酰基肌氨酸钠单体的缓蚀性能以及与常用除盐水缓蚀剂的协同作用作了探讨,发现在一定浓度下,单体对经过加氨调节后的高温除盐水(氨后除盐水)有良好的缓蚀作用,且与大多数除盐水缓蚀剂有良好的协同效应。在此基础上研制了一种复合药剂,并对其缓蚀、阻蚀性能作了研究。动电位极化曲线扫描图谱表明,该复合药剂属于抑制阳极腐蚀的阳极型缓蚀剂,其适用的水质条件为[Cl~-+SO_4~(2-)]不超过50 mg／L,pH不低于8.0；与阻垢剂复配,可以适用于含Ca~(2+)不超过45 mg／L的水质条件。     

甲基丙烯酸乙酯合成工艺研究

以大孔强酸性离子交换树脂为催化剂,甲基丙烯酸(MAA)与乙醇直接酯化合成甲基丙烯酸乙酯(EMA)。在MAA与乙醇摩尔比为1:3、反应温度89～93℃、空速0.3h~(-1)的条件下,MAA转化率不低于98％,EMA的选择性不低于99％。     

PDB-18C6对TI(Ⅰ),An(Ⅲ),Cu(Ⅱ)的吸附及从α轰击的金靶中分离~(199)TI

本文研究了用冠醚树脂二苯并-18-冠-6甲醛聚合物(简称PDB-18C6)对T1(Ⅰ),Au(Ⅲ),Cu(Ⅱ)的吸附行为。实验表明,在盐酸溶液中冠醚树脂的吸附效率顺序为Au(Ⅲ)>T1(Ⅰ)>Cu(Ⅱ)。用高氯酸和乙二醇乙醚淋洗T1(Ⅰ),Au(Ⅲ),它们的回收率一般在82-98.9％和98-100％。还在1.2m回旋加速器的外靶装置上,用25-27MeV的α粒子轰击金靶,累计束流强度为27μA·h,经处理分离后得到仅含0.50％~(200)T1的较高纯度的~(199)T1。     

用环境友好催化剂合成丙酸异丁酯的研究

报道了以固载杂多酸盐TiSiW12O40/TiO2为环境友好催化剂，对以丙酸和异丁醇为原料合成丙酸异丁酯的反应条件进行了研究。实验表明：TiSiW12O40/TiO2是合成丙酸异丁酯的良好催化剂，最佳反应条件为：n（醇）：n(酸）=1.2:1，催化剂用量为反应物料总质量的2.0%。反应时间1.0h，反应温度106-125℃，上述条件下，丙酸异丁酯的收率可达79.1%。