Comparison of xylo-oligosaccharides production by autohydrolysis of fibers separated from ground corn flour and DDGS

Xylo-oligosaccharides (XOS) are known to have beneficial health properties, and are considered to be functional food ingredients. The objective of this study is to compare corn fibers separated from ground corn flour and distillers dried grains with solubles (DDGS) for XOS yield and optimum autohydrolysis conditions. Based on the initial xylan content, the fiber separated from ground corn flour (FC) resulted in higher XOS yield (71.5%) than the fiber separated from DDGS (FD) (54.6%) at the maximum XOS production conditions. XOS produced were mainly xylobiose and xylotriose. Based on total initial material also, FC resulted in higher XOS yield (8.9%) than FD (8.0%), based on total original masses. Thus, fiber separated from ground corn flour would be a better feedstock for production of XOS than fiber separated from DDGS. The conditions for maximum XOS production from FD and FC were 180 °C with 20 min hold-time and 190 °C with 10 min hold-time, respectively.     

Synthesis of Cellulose-Based Macromolecular Coupling Agent and its Utilization in Poly (butylene succinate)/Wood Flour Composites

A long fatty side chain was introduced into the macromolecule of hydroxyethyl cellulose (HEC) via esterification reaction. The hydrophobicity of hydroxyethyl cellulose lauric acid ester (HECLAE) was enhanced in comparison with HEC. The obtained HECLAE was used as macromolecular coupling agent in poly (butylene succinate)/wood flour composites and exhibited a positive influence on improving the mechanical performance of composites. Besides, HECLAE plays a role as a hydrophobic agent in composites. A significant increase in storage modulus (E’) was observed upon the incorporation of treated wood flour. SEM images showed that the dispersion of treated wood flour in PBS matrix was improved.     

Effects of genotype and treatment on the antioxidant activity of sweet potato in Taiwan

Six genotypes of sweet potato commercially available in Taiwan, including TNG57, TNG66, TNG68, TYY1, RP and WP, were used as samples in this study of the effects of steaming and kneading with pre-steaming treatments on the antioxidant components and antioxidant properties of methanolic extracts. Steam treatment increased the total phenols contents of all genotypes (2–13 times), flavonoids content of RP (1.3 times) and anthocyanins contents of RP and WP (5–6 times). Steam treatment also increased the reducing power and scavenging DPPH radical effect of sweet potato flours. For the methanolic extracts of steamed and kneaded flours, reducing powers were 0.02–1.70 at 5.0 mg ml⁻¹ and the scavenging effects on DPPH radicals were 19–92% at 2.5 mg ml⁻¹. Both showed the order of RP > WP > TYY1 and TNG66 > TNG57 and TNG68. However, the chelating effect of the six genotypes at 1.0 mg ml⁻¹ ranged from 50% to 73%. Contents of total phenols, flavonoids, and anthocyanins of sweet potato flours were significantly positively correlated with the reducing power and scavenging DPPH radical effects. After steaming and kneading treatments, RP showed the highest increase in the contents of total phenols, flavonoids and anthocyanins among the six genotypes studied.     

Effects ofSolanum glycoalkaloids on chemosensilla in the Colorado potato beetle

Steroidal glycoalkaloids, found in species of the Solanaceae, elicit bursting activity in galeal and tarsal chemosensilla of adult Colorado potato beetles. The effect has an average latency of 6–12 sec, depending on the sensillum/alkaloid combination. A 20-sec alkaloid treatment is often suffficient to render galeal sensilla unresponsive to gamma-aminobutyric acid, normally an effective stimulant. The alkaloids have similar effects on galeal sensilla of larval Colorado potato beetles and on labellar chemosensilla of the blowfly. It is concluded that these compounds act independently of any specialized chemoreceptor in the Colorado potato beetle, and that association of the Colorado potato beetle with solanaceous plants has not led to evolution of a specific receptor forSolanum glycoalkaloids.     

Application of Laminated Edible Films to Potato Chip Packaging

The effects of various stearic-palmitic acid blend concentrations in films, storage temperatures and storage times on potato chip quality were evaluated using Response Surface Methodology. Storage temperature and time affected the quality of potato chips. The maximum storage times for acceptable potato chip quality were: 30 to 43 days, 23 to 25 days, and 11 to 12 days for storage temperatures of 15, 25 and 35°C, respectively. Results were independent of stearic-palmitic acid blend concentrations.     

Effect of precooking time and drying temperature on the physico-chemical characteristics and in-vitro carbohydrate digestibility of taro flour

Achu is a thick porridge obtained by cooking and pounding taro (Colocasia esculenta) corms and cormels in a mortar. This study was undertaken with the objective of producing precooked taro flour that can be used in the preparation of achu. Taro slices were precooked to times of 0, 20, 45 and 90 min and dried in an air convection oven at varying temperatures of 50, 60, 70 or 80 °C before milling into flour which was then analysed for its water absorption capacity (WAC), water solubility index, emulsion activity and stability, bulk density, foam capacity and least gelation concentration (LGC). Achu made from the flours were equally analysed for their relative penetrometric index, bulk density and colour. The results showed that precooking induced significant (P<0.05) decrease in foam capacity, penetrometric index, and increase in LGC, emulsion stability and WAC. The drying temperature also induces significant reduction in emulsion capacity and stability, penetrometric index, and increase in LGC, WAC. Long precooking time (>45 min) and drying temperature (>60 °C) induced significant reduction of the in-vitro carbohydrate digestibility of taro achu.     

Emulsifying Capacity and Emulsion Stability of Soy Proteins Compared with Corn Germ Protein Flour

Both emulsifying capacity (EC) and emulsion stability (ES) increased with increasing concentrations from 0.4% to 0.8% of soy flour (SF), soy concentrate (SC), soy isolate (SI) and corn germ protein flour (CGPF) when studied by response surface methodology. EC and ES increased as pH increased from 6 to 8 in all samples. Increasing incubation temperatures of protein solutions from 20–70°C or from 4–20°C did not affect EC or ES, respectively. SF had the highest EC, followd by SI, SC, and CGPF.     

Effect of olive residue benzylation on the thermal and mechanical properties of poly(vinyl chloride)/olive residue composites

The changes in mechanical properties, the thermal stability, and the water absorption capacity of poly (vinyl chloride)/olive residue flour composites were studied as a function of various residue olive flour ratios, i.e., 0, 5, 15, and 25% by weight taking into account the effect of benzylation chemical treatment of the filler. The study showed that composite samples prepared with the untreated filler exhibited higher tensile modulus and hardness compared with the neat resin, whereas elongation and tensile strength were observed to decline. On the other hand, the PVC hardness was found to increase with addition of the untreated olive residue flour (ORF), however the composite samples prepared with the benzylated flour exhibited lower hardness than those prepared with untreated olive residue. Moreover, the amount of absorbed water depends on the amount of filler in the composite. The comparison of the results obtained from the samples of F5, F20, and F30 formulations between the untreated and treated ORF indicated a reduction in absorbed water for the composite samples containing treated ORF with benzyl chloride. As a result, the mechanical properties of the treated composites were improved. Furthermore, the thermal characterization of the different samples carried out by color change test and thermogravimetric analysis revealed an increase in the onset temperatures of decomposition for the treated composites. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

关于影响面条食用品质相关因素的探讨

从小麦生产概况、面条发展历史和工艺、国内外对面条食用品质的研究3个方面,分析了我国面条工业发展缓慢的原因,提出了小麦育种-面粉工业-制面工业,3个环节紧密配合,协调发展,才能形成良性循环的新思路。