浅色补强填充剂LEE白滑粉在合成橡胶中的应用

介绍了新型浅色补强填充剂ＬＥＥ白滑粉的组成、物化性质、加工特性、硫化胶性能及应用前景。     

单壁纳米碳管/纳米铝基复合材料的增强效果

用半连续氢电弧法和活性氢等离子蒸发法分别制备出单壁纳米碳管(SWNTs)和纳米A1粉体，然后用提纯后的SWNTs和纳米A1粉体制备出SWNTs含量(质量分数)分别为0、2．5％、5．0％、7．5％和10.0％的单壁纳米碳管／纳米铝基块体复合材料．SWNTs对高强度纳米A1基体具有显著的增强作用，当SWNTs含量小于5．0％时，材料的硬度随着SWNTs含量的提高线性上升．其中5％SWNTs和纳米A1的复合增强效果最好，其硬度可达2.89GPa，大约是粗晶A1(0．15GPa)的20倍．当SWNTs含量超过5．0％时，增强效果开始缓慢的下降．讨论了单壁纳米碳管增强纳米铝基复合材料的强化机制．     

套管液压式φ106mm密封加固系统研究

针对套管液压式φ100mm密封加固系统在实际应用中的缺点,开展了大通径密封加固技术专题研究.研制的套管液压式φ106mm密封加固器承压达30 MPa以上,悬挂力达到500kN以上,可下入φ100mm小直径分层管柱.现场应用见到了明显的效果,为提高小直径分采分注管柱寿命创造了条件.     

锌加(ZINGA)防腐钢筋在杭州湾跨海大桥施工中的应用

杭州湾跨海大桥在极其复杂的海洋环境下施工，外露钢筋极易腐蚀，锌加钢筋能提高钢筋的抗腐蚀能力，本文简介锌加防腐钢筋在大桥施工中的应用情况。     

Study on mechanical principle of reinforcing sidewalls and corners of roadway to control floor heave by anchors

The movement principle of sidewalls and floor of extraction opening is analyzed, it is found that floor heave not only has something to do with the floor strata, but sidewalls. The effect of sidewall anchor and corner anchor is studied, the mechanical principle of reinforcing sidewalls and corners is put forward and applied in engineering practice.     

一种矿山用钢筋网自动化焊接生产线的设计

设计一条钢筋网自动化焊接生产线，包括经料送料平台、纬料自动分料及上料机构、多点电阻点焊机、接料平台、卸料机械手。从上料到出料依靠电机、汽缸之间的协调工作来实现。并由单片机和PLC实现控制功能，上位机用MCGS组态软件在整个过程监视现场，采集工作状态及参数，起到监控作用。     

炭黑表面的纳米结构对橡胶的补强作用

通过扫描隧道显微镜(STM)技术了解到炭黑粒子表面的鳞片状石墨微晶组成的纳米级精细结构，并研究炭黑对橡胶的补强机理。研究表明，炭黑表面的纳米结构使橡胶分子链网络缠绕在炭黑表面，并将外来应力分散到其它分子网络上，共同分担应力，使橡胶弹性体体系不至于迅速破坏。     

钢筋阻锈剂在工业厂房中的应用

介绍了钢筋阻锈剂的基本性能、使用范围和方法。     

Investigation of allyl‐capped carbosilane dendrimers used as crosslinker for silicone rubber

High‐temperature vulcanized silicone rubber was prepared by using allyl‐capped carbosilane dendrimers, in which the core molecules were Si(CH₂CH?CH₂)₄ and Ph₂Si(CH₂CH?CH₂)₂ as crosslinker and nanoscale reinforcing filler, respectively. Allyl‐capped carbosilane dendrimers improved the mechanical properties of silicone rubber. The optimum tensile strength and tear strength were 9.6 MPa and 31.0 kN/m, respectively, when using SiG_n(allyl)m as the crosslinker and 10.1 MPa and 32.0 kN/m, respectively, when using Ph₂SiG_n(allyl)m as the crosslinker. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1772–1775, 2006