Φ177mm PQF无缝管连轧机前横移系统改进

对鞍钢股份无缝钢管厂连轧机前毛管坯横移装置存在的设计缺陷进行了分析,并提出改进方案,将原横移装置由高架轨道横移机构及上下升降链传动装置,改进为地面轨道横移系统及同步旋转臂实现取管、放管过程。实施后消除了生产故障,缩短了轧制周期,降低生产成本。     

Impact of adhesive ingredients on adhesion between rubber and brass-plated steel wire in tire

Proficiency on underlying mechanism of rubber-metal adhesion has been increased significantly in the last few decades. Researchers have investigated the effect of various ingredients, such as hexamethoxymethyl melamine, resorcinol, cobalt stearate, and silica, on rubber-metal interface. The role of each ingredient on rubber-metal interfacial adhesion is still a subject of scrutiny. In this article, a typical belt skim compound of truck radial tire is selected and the effect of each adhesive ingredient on adhesion strength is explored. Out of these ingredients, the effect of cobalt stearate is found noteworthy. It has improved adhesion strength by 12% (without aging) and by 11% (humid-aged), respectively, over control compound. For detailed understanding of the effect of cobalt stearate on adhesion, scanning electron microscopy and energy dispersive spectroscopy are utilized to ascertain the rubber coverage and distribution of elements. X-ray photoelectron spectroscopy results helped us to understand the impact of Cu_XS layer depth on rubber-metal adhesion. The depth profile of the Cu_XS layer was found to be one of the dominant factors of rubber-metal adhesion retention. Thus, this study has made an attempt to find the impact of different adhesive ingredients on the formation of Cu_XS layer depth at rubber-metal interface and establish a correlation with adhesion strength simultaneously.     

Performance and Commercial Application of the Promoter LCC-A for Maximization of Propylene Yield

1 Introduction Propylene as an important feedstock for organic chemicals is mainly originated from steam cracking and catalytic cracking processes. During the FCC process the propylene content varies with the FCC catalyst and process technology adopted, resulting in significant difference in propylene concentration in the cracked product——LPG. The conventional FCC pro- cess generally gives a propylene yield of around 4%, while the FCC process with maximization of propylene yield can in…     

可再生烟气脱硫吸收剂及工艺研究

开发了一种新型可再生烟气脱硫吸收剂、解吸助剂及工艺。合成的吸收剂LDS对烟气中的SOx 具有良好的吸收和解吸能力 ,烟气中SOx 含量在 10 0 0～ 5 0 0 0 0 μg L范围内 ,脱硫率均可达 95 %以上 ;解吸助剂LDS A能有效提高主吸收剂LDS的解吸能力 ,提高单位吸收剂的吸收效率。试验表明 :该工艺脱硫率高 ,烟气净化效果好 ,与传统的烟气脱硫工艺相比 ,SOx 可回收利用 ,不产生二次污染     

助剂对Pd/树脂醚化催化剂催化性能的影响 Ⅰ.铝助剂的影响

研究了不同助剂对Ｐｄ／树脂醚化催化剂在临氢条件下对催化裂化汽油Ｃ５馏份与甲醇和Ｈ２反应的催化性能的影响。结果表明，在Ｐｄ／树脂醚化催化剂中引入Ｚｒ、Ｔｉ、Ｂ、Ｓｎ和Ａｌ等助剂后，都能改善催化剂的醚化、双键异构和二烯烃选择性加氢活性，其中以Ａｌ、Ｓｎ为最好。Ａｌ助剂的体积质量和负载方式对Ｐｄ－Ａｌ／树脂醚化催化剂的活性有影响。ＢＥＴ方法和Ｘ－射线荧光光谱分析（ＸＦＳＡ）表明，Ａｌ助剂对Ｐｄ－Ａｌ／树脂醚化催化剂的表面积、孔结构和Ｐｄ离子交换量影响较小。     

江苏省本地电话网结构与发展

分片汇接的网状网结构是江苏省本地电话网的基本框架,而汇接局和连接汇接局的传输系统则是网路规划与通信建设的重点。     

Poly-functional Catalyst Development for Benzene Production from Alkyl-aromatic Mixture via Hydrodealkylation

Development of a poly-functional catalyst that has higher hydrodealkylation activity based on 15% Cr/γ- Al₂ O₃ was researched for benzene production from an alkyl-aromatic mixture via hydrodealkylation. For this goal, the effects of the promoters like Fe, Co, or Ni and their concentrations on the activity of a Cr/Al₂ O₃ catalyst were investigated. Toluene + n-heptane + tetrahydrotiophene (89:10:1 w%) model mixture, which has the same content as industrial aromatics, was used as feedstock. The activities of catalysis in reactions of hydrodealkylation, hydrocracking, and hydrogenolize with respect to conversions of toluene, heptane, and tetrahydrotiophene were tested, respectively. As to the obtained results, the catalyst including 5% Fe has a higher hydrodealkylation activity, compared to the catalyst including Co, and especially to the alumocrom catalyst not including a promoter, while it has a lower coke formation and reduced activity to the catalyst including Ni.     

Catalytic dehydrogenation of ethylbenzene with carbon dioxide: promotional effect of antimony in supported vanadium–antimony oxide catalyst

Alumina-supported vanadium oxide, VO_x/Al₂O₃, and binary vanadium–antimony oxides, VSbO_x/Al₂O₃, have been tested in the ethylbenzene dehydrogenation with carbon dioxide and characterized by S_BET, X-ray diffraction, X-ray photoelectron spectroscopy, hydrogen temperature-programmed reduction and CO₂ pulse methods. VSbO_x/Al₂O₃ exhibited enhanced catalytic activity and especially on-stream stability compared to VO_x/Al₂O₃ catalyst. Incorporation of antimony into VO_x/Al₂O₃ increased dispersion of active VO_x species, enhanced redox properties of the systems and formed a new mixed vanadium–antimony oxide phase in the most catalytically efficient V_0.43Sb_0.57O_x/Al₂O₃ system.     

An agent-based framework for cooperating expert systems in concurrent engineering

This paper describes an agent-based framework with a tandem integration architecture for cooperating distributed, heterogeneous, and autonomous concurrent engineering systems. The approach has been experimented with using the prototype AGENTS system. It is demonstrated that design tools can be dynamically connected and configured to construct highly complex systems on an incremental basis, designing and proving one system at a time without bothering the rest. A major advantage of the approach is the balance between the interoperability and the autonomy of individual systems.