钻井液振动筛叠层筛网透筛率的研究

从理论上详细论述了钻井液振动筛叠层筛网对固相颗粒分离的影响 ,首次提出用透筛率的概念定量地描述这一影响 ,并进行了实例计算。研究表明 ,当上下层筛网随机叠加时对透筛率的影响有以下几种情况 :(1)当上下层筛网开孔尺寸相除的余数为零 ,任意组合叠层筛网的透筛率分别为某一常数 ;(2 )上层筛网目数一定时 ,下层筛网目数越大 ,则透筛率越小 ;(3)上下层筛网的目数相差越小 ,透筛率越小 ;(4 )任意目数的上下层筛网随机叠加后 ,其透筛率仅在一个小范围内变化 ,因此任一叠层筛网有其固有的透筛率属性。     

A vibrating-tube densimeter for fluids at high pressures and temperatures

A vibrating U-tube apparatus has been developed for determining the densities of pure fluids and fluid mixtures at 10-200 MPa and 323-773 K. Measured parameters areP,T, andr (period of vibration). Fluids are injected into the U-tube at constantP andT. Three or more reference fluids are used to calibrate the response of the instrument. Fluid mixtures are produced by pumping pure fluids into T-junctions on the upstream side of the U-tube using high accuracy syringe pumps. An automated syringe pump is used to maintainP at setpoint ±0.01 MPa.T is controlled to ±0.01 K using a closed-loop, electronic signal amplification/feedback system. For mixtures, a statistically significant number of measurements of r are obtained to account for the effects of small heterogeneities in fluid composition (generally <0.005X;). Typically, density data for 15 fluids can be obtained in a 6- to 8-h period. Considering all of the potential sources of error in the experimentation, conservative estimates of uncertainty are as follows:P, ±0.02 MPa;T, ±0.05 K;p (pure fluids), ±0.0005g.cm^–3; andp (fluid mixtures), ±0.0005-0.0010g-cm^–3.Paper presented at the Twelfth Symposium on Thermophysical Properties, June 19–24, 1994, Boulder, Colorado, U.S.A.     

2#板坯连铸机振动台故障分析及改造

论述了银山型钢有限公司炼钢厂2#板坯连铸机自投产以来其振动台存在的问题，根据实际情况分析论证并进行改造实施，实施后效果明显。     

粒度控制——页岩、煤矸石空心砖原料制备的关键

阐述了页岩、煤矸石的原料粒度对制砖性能的影响,介绍了几种典型的控制颗粒粒度的工艺方案;简要分析了几种筛分机械的优缺点,着重介绍MVS电磁振动高频振网筛在几个使用现场的应用结果,为制砖企业解决原料生产的难题提供了办法。     

ZS1756振动筛动态分析

应用ＳＡＰ５Ｐ软件计算矿用振动筛前４０阶固有模态，从提高寿命观点看，第１阶，第３－４阶和第６阶模态应采取抑制措施；从队噪观点看，前６阶模态应给予注意。     

振动机械的调整与质心的计算

以一台振动筛的故障处理为例,说明振动机械的激振与运动特点、调整原理及其应用。介绍用计算机计算参振零部件及设备质心的方法。     

双质体振动机的应用——浅谈解决橡胶后处理装置地基振动的方法

以降低合成橡胶生产厂后处理装置各种振动机造成的地基振动为目的,对双质体振动机的隔振效能进行了定量分析。通过生产实践,总结了单质体振动机、非平衡型双质体振动机和对称平衡型双质体振动机的优缺点,给出了后者的设计计算数据。经综合分析和生产考核,认为采用对称平衡型双质体振动机是降低地基振、降低噪音、延长振动机的运转周期和使用寿命的最佳方法。     

基于MEMS声传感器的圆柱壳体振动陀螺振型检测技术

振动陀螺谐振子振型一般采用激光进行非接触式测量,这种方法存在设备成本高、操作复杂、效率低等问题,因此,提出了一种基于MEMS声传感器的圆柱壳体振动陀螺谐振子振型测试方法。该方法利用体积小,指向性高的MEMS声传感器对谐振子振动声场进行高分辨率测量,获得精确的谐振子振动分布情况,建立了谐振子声波测试实验系统,进行了测试实验,并与激光测振仪的测量结果进行比对。实验结果表明,该测试系统具有较高的振型测量精度。这种测试方法成本低,操作简便,测量精度高,可以实现谐振子振型的高精度快速测量,为后续的谐振子修形及陀螺控制提供重要基础。     

Homogeneous Fluidization Characteristics of Vibrating Fluidized Beds

The effects of vibration parameters, operating conditions and material properties on fluidization quality were investigated by the measurement and analysis of voidage fluctuation signals in a vibrating fluidized bed with a diameter of 148 mm. The fluctuation deviation of the bed voidage and the enhancement index of the bed derived can describe bed homogeneity and its extension. A new criterion of homogeneity, consisting of the material parameter (Ar), operating parameters (H₀, u/u_mf) and vibration parameters (a, ω), is proposed to predict a suitable range of homogeneous fluidization. Experimental results on eight kinds of solids, five static bed heights and different vibration parameters were used to propose guidelines for the reasonable selection of operating conditions for vibrating fluidization and better operating conditions.